DOI QR코드

DOI QR Code

Research on Oscillation Character of Six-Phase Fractional-Slot Concentrated-Winding Permanent Motor with Different Slot-Pole Match

  • Qiao, Ming-zhong (Dept. of Electrical Engineering, Naval University of Engineering) ;
  • Zhu, Yong-xin (Dept. of Electrical Engineering, Naval University of Engineering) ;
  • Liang, Jing-hui (Dept. of Electrical Engineering, Naval University of Engineering) ;
  • Li, Geng (Dept. of Electrical Engineering, Naval University of Engineering)
  • Received : 2015.12.07
  • Accepted : 2016.05.27
  • Published : 2016.11.01

Abstract

The oscillation character of permanent magnetic motor is highly related to its slot-pole match. By calculating air-gap magnet field and radial electromagnetic force of 6-phase fractional-slot concentrated-winding permanent magnetic motor with slot-pole match of 48/44, 48/46, 48/50 and 48/52 under no load and load status, oscillation character of permanent magnetic motor is analyzed. A 20kW prototype with 48 slots and 44 poles is designed. With many sensors attaching to the corresponding parts, oscillatory acceleration is measured, and spectrum of oscillation frequency is recorded as well. The experiment results give proof to the analysis method for permanent magnetic motor oscillation in this paper.

Keywords

References

  1. Patel. B. Reddy, Ayman. M. EL-Refaie, et al. Effect of number of layers on performance of fractional-slot concentrated-windings interior Permanent magnet machines. 8th International Conference on Power Electronics - ECCE Asia, 2011, 3:1921-1928.
  2. Lei Hao, General Motors Warren. Design and analysis of IPM machine with bar wound fractional slot distributed winding for automotive traction application. Energy Conversion Congress and Exposition (ECCE), 2013:598-605.
  3. Aldo Boglietti, Ayman M, Oliver Drubel, et al. Electrical machine topologies hottest topics in the electrical machine research community, IEEE industrial electronics magazine, 2014(6):18-30.
  4. E. A. Klingshirn. High phase order induction motors -Part I- description and theoretical considerations, IEEE Trans. Power App.Syst., 1983,102, (1): 47-53.
  5. E.Levi. Multiphase electric machines for variablespeed applications. IEEE Trans. Ind. Electron. 2008, 55(5):1893-1909. https://doi.org/10.1109/TIE.2008.918488
  6. L. J. Wu, Z. Q. Zhu, J. T. Chen, Z. P. Xia, Optimal split ratio in fractional-slot interior permanentmagnet machines with non-overlapping windings. IEEE Tractions on Magnetics, 2010, 46(5): 1235-1242. https://doi.org/10.1109/TMAG.2009.2038482
  7. Massimo Barcaro, Adriano Faggion, Nicola Bianchi. Sensorless rotor position detection capability of a dual three-phase fractional-slot IPM machine. IEEE Transactions on Industry Applications, 2012, 48(6): 2068-2078. https://doi.org/10.1109/TIA.2012.2226222
  8. Haodong Yang, Yangsheng Chen. Influence of radial force harmonics with low mode number on electromagnetic vibration of PMSM. IEEE Trans. on Energy Conversion, 2014, 29 (1)38-45. https://doi.org/10.1109/TEC.2013.2290304
  9. Mohammad Islam, Rakib Islam, Tomy Sebastian. Noise and vibration characteristics of permanent magnet synchronous motors using electromagnetic and structural analyses. Energy: 3399-3405
  10. YU Pei-qiong, Liu Sheng. Techniques for reducing the effects of detent force in ' PMLSMs. International Conference on Computational Electromagnetic and Its Applications Proceedings, 2004:126-129.
  11. Y. S. Chen, Z. Q. Zhu, D. Howe. Vibration of PM brushless machines having a fractional number of slots per pole. IEEE Trans. on Magnetics, 2006, 42(10): 3395 - 3397 https://doi.org/10.1109/TMAG.2006.879072
  12. Sun-Kwon Lee, Gyu-Hong Kang, Jin Hur. Finite element computation of magnetic vibration sources in 100 kW two fractional-slot interior permanent magnet machines for ship. IEEE Trans. on Magnetics. 2012, 48(2):867-870. https://doi.org/10.1109/TMAG.2011.2176323
  13. Van Li, Shuangpeng Li, Jiakuan Xia, Fengge Zhang. Noise and vibration characteristics analysis on different structure parameters of permanent pagnet synchronous motor. International Conference on Electrical Machines and Systems, 2013:46-49.