DOI QR코드

DOI QR Code

순차적 설계기법에 의한 DWT 75,000 정유운반선의 선형설계

Stepwise Hull Form Design of DWT 75,000 Product Oil Carrier

  • 박연석 (목포대학교 조선해양공학과) ;
  • 박세라 (목포대학교 조선해양공학과) ;
  • 정요한 (목포대학교 조선해양공학과) ;
  • 최정규 (목포대학교 조선해양공학과) ;
  • 유재훈 (목포대학교 조선해양공학과)
  • Park, Yeon Seok (Department of Naval Architecture and Ocean Engineering, Mokpo National University) ;
  • Bak, Sera (Department of Naval Architecture and Ocean Engineering, Mokpo National University) ;
  • Jeong, Yohan (Department of Naval Architecture and Ocean Engineering, Mokpo National University) ;
  • Choi, Jung-Kyu (Department of Naval Architecture and Ocean Engineering, Mokpo National University) ;
  • Yoo, Jaehoon (Department of Naval Architecture and Ocean Engineering, Mokpo National University)
  • 투고 : 2016.06.02
  • 심사 : 2016.10.12
  • 발행 : 2016.12.20

초록

To design the modified hull form with relatively unfavorable dimensions and constraints than the parent ship the stepwise design was applied. In each design step the resistance characteristics was estimated by numerical calculations using CFD programs as Wavis 1.4, Wavis 2.1 and Fluent 12.1. The wave profiles along hull surface by potential flow calculations were investigated to improve wave resistance by modifying the bow shapes. To improve the stern shapes with a point of viscous form resistance the pressure distributions on hull surface and the limiting streamlines are investigated by viscous flow calculations. The design objectives such as shortening the LBP, enlarging the propeller tip clearance, moving forward of the LCB location and increasing the displacement were applied by stepwise to develop the new hull form of DWT 75,000 product oil carrier. Finally a new hull form was developed without the resistance performance loss compared with the parent ship.

키워드

참고문헌

  1. Bak, S. Jeong, Y. Park, Y.S. & Yoo, J., 2015. A study on the application of WAVIS for evaluation of hull form. Proceedings of the Annual Autumn Conference, SNAK, Geoje, Korea, 4-6 November 2015.
  2. Cho, S.H., 2011. The Optimization method of hull form performance by limiting streamline tracing technique. Master's Thesis. Mokpo National University, Korea.
  3. Choi, J.K., 2014. A study on the estimation of self propulsion performance of a ship using numerical analysis. Ph.D Thesis. Chungnam National University, Korea.
  4. Kim, H.J., Chun, H.H. & Choi, H.J., 2007. Development of CFD Based Stern Form Optimization Method. Journal of the Society of Naval Architects of Korea, 44(6), pp.564-571. https://doi.org/10.3744/SNAK.2007.44.6.564
  5. Park, H.S. Kim, T.G. Oh, S.H. Kim, B.N. Kim, W.J. Yoo, J.H. & Cho, S.H., 2011. Study on the Resistance Improvement for and Extremely Full Ship Under CSR. Journal of the Society of Naval Architects of Korea, 48(2), pp.99-106. https://doi.org/10.3744/SNAK.2011.48.2.99
  6. Sherbaz, S. & Duan, W., 2012. Operational Options for Green Ship. Journal of Marine Science and Application, 11(3), pp.335-340. https://doi.org/10.1007/s11804-012-1141-2
  7. Yoo, J. & Kim, H., 1996. A Study on the Design of Ship's Bow Form using Surface Panel Method. Journal of the Society of Naval Architects of Korea, 33(3), pp.35-47.