참고문헌
- BS 7910:2005, Guide to Methods for Assessing the Acceptability of Flaws in Metallic Structures, British Standards Institution
- R6 Revision 4, Assessment of the Integrity of Structures containing Defects, British Energy Generation Limited
- API 579, Recommended Practice for Fitness-For-Service, American Petroleum Institute
- FITNET Fitness-for-Service (FFS)-Procedure (Vol. 1), Eds. M. Kocak, S. Webster, J.J. Janosch, R.A. Ainsworth, R. Koers, 2008, ISBN: 978-3-940923-00-4.
- FITNET Fitnessfor- Service (FFS) - Annex (Vol. 2), Eds. M. Koçak, I. Hadley, S. Szavai, Y. Tkach, N. Taylor, (2008), ISBN: 978-3-940923-01-1
- J. Sharples, P. Gill, L. Wei, S. Bate, Revised Guidance on Residual Stresses in BS7910, Proceedings of the ASME 2011 Pressure Vessels & Piping Division Conference PVP2011 July 17-21, (2011), Baltimore, Maryland, USA, Paper No. PVP2011-57071
- S. K. Bate, D. Green and D. J. Buttle, A Review of Residual Stress Distributions in Welded Joints for the Defect Assessment of Offshore Structures, OTH 482, HMSO (1997)
- S. H. Jeong, D. H. Park, H.S. Kim, S. B. Shin, T. J. Park, A Study on Reduction of Pre-crack Deviation in CTOD Specimen using Reverse Bending Method, J. of Welding and Joining, 33 (2) (2015), 62-68 (in Korean) https://doi.org/10.5781/JWJ.2015.33.2.62
- H. S. Kim, S. B Shin, M. H. Kim, A Study on Con-servatism of Fatigue Crack Growth Parameters in BS7910, Proceeding of KWJS, (2015), 66-66 (in Korean)
- B. J. Kang, Y. I. Kim, C. H. Ryu, H. G. Ki, S. G. Park, Y. T. Oh, Flaw Assessment on an Offshore Structure using Engineering Criticality Analysis, Journal of the Society of Naval Architects of Korea, 52 (6) (2015), 435-443 (in Korean) https://doi.org/10.3744/SNAK.2015.52.6.435
- NORSOK standard N-004 Rev.2 2004, Design of Steel Structure, Standards Norway
- http://www.poscopac.com/eng/sub02/10_02_03.php
- DNVGL-RU-SHIP-Pt.2, Ch.2, St2., Metallic materials, (2016)
- ASTM E 8/E 8M-11, Standard Test Methods for Tension Testing of Metallic Materials, ASTM international
- BS 7448-Part2, Method for Determination of KIC, critical CTOD and Critical J Values of Welds in Metallic Materials, (1997)