DOI QR코드

DOI QR Code

Monitoring the failure mechanisms of a reinforced concrete beam strengthened by textile reinforced cement using acoustic emission and digital image correlation

  • Aggelis, Dimitrios G. (Department of Mechanics of Materials and Constructions, Vrije Universiteit Brussel) ;
  • Verbruggen, Svetlana (Department of Mechanics of Materials and Constructions, Vrije Universiteit Brussel) ;
  • Tsangouri, Eleni (Department of Mechanics of Materials and Constructions, Vrije Universiteit Brussel) ;
  • Tysmans, Tine (Department of Mechanics of Materials and Constructions, Vrije Universiteit Brussel) ;
  • Van Hemelrijck, Danny (Department of Mechanics of Materials and Constructions, Vrije Universiteit Brussel)
  • 투고 : 2014.02.09
  • 심사 : 2014.07.03
  • 발행 : 2016.01.25

초록

One of the most commonly used techniques to strengthen steel reinforced concrete structures is the application of externally bonded patches in the form of carbon fiber reinforced polymers (CFRP) or recently, textile reinforced cements (TRC). These external patches undertake the tensile stress of bending constraining concrete cracking. Development of full-field inspection methodologies for fracture monitoring are important since the reinforcing layers are not transparent, hindering visual observation of the material condition underneath. In the present study acoustic emission (AE) and digital image correlation (DIC) are applied during four-point bending tests of large beams to follow the damage accumulation. AE helps to determine the onset of fracture as well as the different damage mechanisms through the registered shifts in AE rate, location of active sources and change in waveform parameters. The effect of wave propagation distance, which in large components and in-situ can well mask the original information as emitted by the fracture incidents is also discussed. Simultaneously, crucial information is supplied by DIC concerning the moments of stress release of the patches due to debonding, benchmarking the trends monitored by AE. From the point of view of mechanics, conclusions on the reinforcing contribution of the different repair methodologies are also drawn.

키워드

참고문헌

  1. Aggelis, D.G. (2011), "Classification of cracking mode in concrete by acoustic emission parameters", Mech. Res. Commun., 38, 153-157. https://doi.org/10.1016/j.mechrescom.2011.03.007
  2. Aggelis, D.G., Shiotani, T., Papacharalampopoulos, A. and Polyzos, D. (2012), "The influence of propagation path on acoustic emission monitoring of concrete", Struct. Health Monit., 11(3), 359-366. https://doi.org/10.1177/1475921711419992
  3. Aggelis, D.G., Verbruggen, S., Tsangouri, E., Tysmans, T. and Van Hemelrijck, D. (2013), "Characterization of mechanical performance of concrete beams with external reinforcement by acoustic emission and digital image correlation", Constr. Build. Mater., 47, 1037-1045. https://doi.org/10.1016/j.conbuildmat.2013.06.005
  4. Carpinteri, A., Lacidogna, G., Niccolini, G. and Puzzi, S. (2008), "Critical defect size distributions in concrete structures detected by the acoustic emission technique", Meccanica, 43, 349-363. https://doi.org/10.1007/s11012-007-9101-7
  5. European Patent Office (2000), "EP 0 861 216 B1, Inorganic resin compositions. Their preparation and use thereof".
  6. Farhidzadeh, A., Dehghan-Niri, E., Salamone, S., Luna, B. and Whittaker, A. (2013), "Monitoring crack propagation in reinforced concrete shear walls by acoustic emission", J. Struct. Eng. - ASCE, 139(12), 04013010. doi:10.1061/(ASCE)ST.1943-541X.0000781
  7. CEB-FIB (2001), fib bulletin 14 Externally bonded FRP reinforcement for RC structures. Lausanne, Switzerland; ISBN 2-88394-054-1.
  8. Ge, M.J. (2003), "The analysis of source location algorithms, Part II: Iterative methods", J. Acoust. Emission, 21, 29-51.
  9. Grosse, C.U. and Ohtsu, M. (2008), Acoustic emission testing, Heidelberg, Springer.
  10. Karihaloo, B.L., Ramachandra Murthy, A. and Iyer, N.R. (2013), "Determination of size-independent specific fracture energy of concrete mixes by the tri-linear model", Cement Concrete Res., 49, 82-88. https://doi.org/10.1016/j.cemconres.2013.03.010
  11. Luo, X., Haya, H., Inaba, T. and Shiotani, T. (2006), "Seismic diagnosis of railway substructures by using secondary acoustic emission", Soil Dynam. Earthq. Eng., 26(12), 1101-1110. https://doi.org/10.1016/j.soildyn.2006.03.002
  12. Ohno, K. and Ohtsu, M. (2010), "Crack classification in concrete based on acoustic emission", Constr. Build. Mater., 24, 2339-2346. https://doi.org/10.1016/j.conbuildmat.2010.05.004
  13. Ohtsu, M. (2010), "Recommendation of RILEM TC 212-ACD: Acoustic emission and related NDE techniques for crack detection and damage evaluation in concrete: Test method for classification of active cracks in concrete structures by acoustic emission", Mater. Struct., 43(9), 1187-1189. https://doi.org/10.1617/s11527-010-9640-6
  14. Ombres L. (2012), "Debonding analysis of reinforced concrete beams strengthened with fibre reinforced cementitious mortar", Eng. Fract. Mech., 81, 94-109. https://doi.org/10.1016/j.engfracmech.2011.06.012
  15. Shahidan, S., Pulin, R., Muhamad Bunnori, N. and Holford, K.M. (2013), "Damage classification in reinforced concrete beam by acoustic emission signal analysis", Constr. Build. Mater., 45, 78-86. https://doi.org/10.1016/j.conbuildmat.2013.03.095
  16. Sutton, M.A., Orteu, J.J. and Schreier, H.W. (2009), Image Correlation for Shape, Motion and Deformation Measurements. Basic Concepts, Theory and Applications, Springer Science+Business Media, New York, USA; ISBN 978-0-387-78746-6.
  17. Taljsten, B. and Blanksvard, T. (2007), "Mineral-based bonding of carbon FRP to strengthen concrete structures", J. Compos. Constr., 11(2), 120-128. https://doi.org/10.1061/(ASCE)1090-0268(2007)11:2(120)
  18. TRADECC (2007), Technical data sheet: PC(R) CARBOCOMP.
  19. TRADECC (2009), Technical data sheet: PC(R) 5800/BL.
  20. Uddin, F.A.K.M., Shigeishi, M. and Ohtsu, M. (2006), "Fracture mechanics of corrosion cracking in concrete by acoustic emission", Meccanica, 41, 425-442. https://doi.org/10.1007/s11012-006-0004-9
  21. Van Tittelboom, K., De Belie, N., Lehmann, F. and Grosse, C.U. (2012), "Acoustic emission analysis for the quantification of autonomous crack healing in concrete", Constr. Build. Mater., 28, 333-341. https://doi.org/10.1016/j.conbuildmat.2011.08.079
  22. Verbruggen, S. (2014), Reinforcement of concrete beams in bending with externally bonded textile reinforced cementitious composites, PhD thesis Vrije Universiteit Brussel.
  23. Verbruggen, S., Wastiels, J., Tysmans, T., Remy, O. and Michez, S. (2012), "The influence of externally bonded longitudinal TRC reinforcement on the crack pattern of a concrete beam", Proceedings of the 3rd international conference on concrete repair, rehabilitation and retrofitting (3-8/9/12), Cape Town, South Africa.
  24. Verstrynge, E., Schueremans, L., Van Gemert, D. and Wevers, M. (2009), "Monitoring and predicting masonry's creep failure with the acoustic emission technique", NDT&E Int., 42(6), 518-523. https://doi.org/10.1016/j.ndteint.2009.03.001

피인용 문헌

  1. Multiple cracking analysis of HTPP-ECC by digital image correlation method vol.17, pp.6, 2016, https://doi.org/10.12989/cac.2016.17.6.831
  2. Study on correlation of acoustic emission and plastic strain based on coal-rock damage theory vol.12, pp.4, 2016, https://doi.org/10.12989/gae.2017.12.4.627
  3. Effect of polymer addition on air void content of fine grained concretes used in TRCC vol.20, pp.2, 2017, https://doi.org/10.12989/cac.2017.20.2.165
  4. Damage progression study in fibre reinforced concrete using acoustic emission technique vol.23, pp.2, 2016, https://doi.org/10.12989/sss.2019.23.2.173
  5. Assessment of speckle image through particle size and image sharpness vol.24, pp.5, 2016, https://doi.org/10.12989/sss.2019.24.5.659
  6. Experimental study on direct tension behavior of concrete through combined digital image correlation and acoustic emission techniques vol.20, pp.6, 2016, https://doi.org/10.1002/suco.201800354
  7. Numerical and experimental study on flexural behavior of reinforced concrete beams: Digital image correlation approach vol.24, pp.6, 2019, https://doi.org/10.12989/cac.2019.24.6.561
  8. Creep of stainless steel under heat flux cyclic loading (500-1000℃) with different mechanical preloads in a vacuum environment using 3D-DIC vol.24, pp.6, 2016, https://doi.org/10.12989/sss.2019.24.6.759
  9. Investigating loading rate and fibre densities influence on SRG - concrete bond behaviour vol.34, pp.6, 2020, https://doi.org/10.12989/scs.2020.34.6.877