DOI QR코드

DOI QR Code

A OSPF Routing Scheme based on Energy Profiles and Its Characteristics for QoS-Aware Energy Saving(QAES) in IP Core Networks

IP 네트워크에서 QoS-Aware Energy Saving(QAES)을 위한 Energy Profile 기반 OSPF 라우팅 방식 및 특성

  • Seo, Yusik (Depertment of Electronics Engineering, Hankuk University of Foreign Studies) ;
  • Han, Chimoon (Depertment of Electronics Engineering, Hankuk University of Foreign Studies)
  • 서유식 (한국외국어대학교 전자공학과) ;
  • 한치문 (한국외국어대학교 전자공학과)
  • Received : 2015.11.10
  • Accepted : 2015.12.30
  • Published : 2016.01.25

Abstract

Nowadays various methods for energy saving have been studied in IP networks. This paper suggests a 2-phase OSPF routing method for energy saving on IP networks having various energy profiles and analyzes its characteristics. The phase-1 of the routing is an OSPF routing method considering the energy cost of devices besides existing metrics to minimize energy consumption. In the phase-2 of the routing, it makes core nodes go into sleep sate for energy saving and reroutes the paths affected by sleeping core nodes. At this time, we confirm that the characteristics of mean delay and energy efficiency can be satisfied by limiting an allowable hop number in the reroute paths, and utilization rate of nodes and links for assuring energy saving and network-level QoS. Since the efficiency of energy saving and delay characteristics differ according to selection methods of core nodes to go into sleep state, it is that the a method of core node selection based on MP(minimum_path) is more excellent than others in terms of network-level QoS and energy saving in IP networks.

IP 네트워크에서 에너지 소모를 줄이기 위해 다양한 방법이 연구 되어 왔다. 본 논문에서는 다양한 에너지 프로파일을 갖는 IP 네트워크에서 2단계 라우팅 방식을 제시하고, 그 특성을 분석한다. 단계1의 라우팅 방식에서는 에너지 절약을 위해 기존 코스트 외에 에너지 코스트를 고려한 OSPF 라우팅이고, 단계2에서는 가능한 많은 코아 노드를 sleep 상태로 만든 후, sleep 노드로 영향을 받는 경로만 재 라우팅 하는 방식을 적용한다. 이때 단계2에서 에너지 절약 특성과 네트워크 레벨의 QoS 보장을 위한 방법으로, 재 라우팅 시 허용 가능한 증가 홉 수와 링크 및 노드의 이용률을 제한함으로써 에너지 효율 개선 및 네트워크 레벨의 지연 특성을 동시에 만족시킬 수 있다는 것을 확인한다. 또 sleep 모드로 둘 코아 노드를 선정하는 방법에 따라 에너지 절약 효율 및 지연 특성이 다르며, MP (minimum_path)에 기초하여 sleep 상태로 만들 코아 노드를 선정하는 방식이 우수함을 나타낸다.

Keywords

References

  1. C. Despins, et al., Leveraging Green Communications for Carbon Emission Reductions: Techniques, Testbeds, and Emerging Carbon Footprint Standards, IEEE Commu. Mag., Vol.49, no.8, pp. 101-109, 2011. https://doi.org/10.1109/MCOM.2011.5978422
  2. Smart 2020, Enabling the Low-Carbon Economy in the Information Age, The Climate Group, London, U.K., 2008. (http://www.smart2020.org).
  3. Diego Reforgiato Recupero, "Toward a green Internet," Science, vol. 339, no. 1533, March 2013.
  4. J. Restrepo, C. Gruber, and C. Machuca, "Energy Profile Aware Routing," in First International Workshop on Green Communications, June 2009.
  5. Rosario G. Garroppo, Stefano Giordano, Gianfranco Neucioni, and Michele Pagano, "Energy Aware Routing based on Energy Characterization of Devices: Solutions and Analysis," 2011 IEEE International Conference on Communications Workshops(ICC), June, 2011.
  6. Bianzino A.P., Chaudet C., Larroca F., Rossi D. and Rougier J., "Energy-aware routing in IP networks: A reality check," IEEE, GLOBECOM Workshops, December, 2010.
  7. Sergiu Nedevschi, Lucian Popa, Gianluca Iannaccone, Sylvia Ratnasamy and David Wetherall, "Reducing Network Energy Consumption via Sleeping and Rate-Adaptation," NSDI '08: 5th USENIX Symposium on Networked Systems Design USENIX Association and Implementation, pp. 323-336, 2008.
  8. Chimoon Han, "Adaptive Buffer and Burst Scheme and Its Characteristics for Energy Saving in Core IP Networks," Jouranl of IEEK, pp. 34-42, Vol. 49, No.10, October, 2012.
  9. Antonio Cianfrani, Vincenzo Eramo, et al., "An OSPF - Integrated Routing Strategy for QoSAware Energy Saving in IP Backbone Networks," IEEE Transactions on Network and Service Management, March 2012.
  10. Yusik Seo, Chimoon Han "Energy Saving Characteristics of OSPF Routing based on Energy Profiles," Journal of KICS, pp 1296-1308, vol.40, No.07, July, 2015. https://doi.org/10.7840/kics.2015.40.7.1296