Journal of the Architectural Institute of Korea Structure & Construction (대한건축학회논문집:구조계)

Architectural Institute of Korea (대한건축학회)
권호 표지
DOI QR코드

DOI QR Code

The Fluidity and Hardened Properties of Eco-Friendly Low Cement Concrete with 3 Types of Binders

3성분계 친환경 저시멘트 콘크리트의 유동성 및 경화특성

  • Received : 2015.09.03
  • Accepted : 2015.11.14
  • Published : 2015.11.30
⟨ Previous Next ⟩

Abstract

Recently, many researchers of the construction materials field are concerned about eco-friendly concrete in the construction industry due to the greenhouse gas reduction problem and international issue. In this paper, we investigates the effect of the kinds and replacement ratio of cementitous materials including fly ash and granulated blast furnace slag powder on the fluidity, setting time, temperature rise, compressive strength and drying shrinkage of eco-friendly low cement concrete with 3 types of binders. Fly ash and granulated blast furnace slag powder were used to replace Portland cement at replacement ratios of 70, 80, and 90% by binder mass. Test results demonstrate that the fluidity, compressive strength and salt damage resistance of the eco-friendly low cement concrete mixes were better than that of the control mix. In addition, the peak temperature of the eco-friendly low cement concrete was 4.0 to $5.9^{\circ}C$ lower than that of the control mix. In this investigation, 10% cementitous materials replacement caused a reduction in the peak temperature of about 0.3 to $1.0^{\circ}C$ in the concrete mixes. The setting time of F10S80 concrete mix (cementitous materials replacement ratio 90%; fly ash 10% and granulated blast furnace slag 80%) was similar to that of the control mix.

Keywords

Acknowledgement

Supported by : 원광대학교

References

  1. Ahn, T., Son, S., Jo, J., Kim, Y., & Jeon, Y. (2014). Mechanical Properties of High Flowing Self-Compacting Concrete using High Volume Blast-Furnace Slag. Proceedings of KCI, 545-546.
  2. Choi, S., Lee, S., & Monteiro, J. (2012). Effect of Fly Ash Fineness on Temperature Rise, Setting, and Strength Development of Mortar. Journal of Materials in Civil Engineering, 24(5), 499-505. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000411
  3. Han, C., & Hwang, Y. (2002). Influence of Fine Aggregate and Admixture Factor on the Bleeding of Concrete. Journal of AIK, 18(6), 93-100.
  4. Jeong, J., Jang, S., Choi, Y., Jung, S., & Kim, S. (2015). Effect of Replacement Ratio and Fineness of GGBFS on the Hydration and Pozzolanic Reaction of High-Strength HIgh-Volume GGBFS Blended Cement Pastes. Journal of Korea Concrete Institute, 27(2), 115-125. https://doi.org/10.4334/JKCI.2015.27.2.115
  5. KBS News (2015), Greenhouse gas reduction 37% in 2030, July 1.
  6. Lee, H. (2005). The Environmental Problem and Environmental Friendly Method Invoving Concrete. Magazine of the Korea Concrete Institute, 17(4), 8-10. https://doi.org/10.22636/MKCI.2005.17.4.8
  7. Lee, K., Kwon, K., Lee, H., Lee, S., & Kim, G. (2004). Characteristics of Autogenous Shrinkage for Concrete Containing Blast-Furnace Slag. Journal of the Korea Concrete Institute, 16(5), 621-626. https://doi.org/10.4334/JKCI.2004.16.5.621
  8. Lee, S., Song, H., & Lee, J. (2008). An Experimental Study on the Early Strength Development Properties of Concrete according to Curing Condition and Used Materials. Journal of the Korea Concrete Institute, 20(6), 721-729. https://doi.org/10.4334/JKCI.2008.20.6.721
  9. Yang, G., Seo, E., Jung, Y., & Tae, S. (2014). Effect of Ground Granulated Blast-Furnace Slag on Life-Cycle Environmental Impact of Concrete. Journal of the Korea Concrete Institute, 26(1), 13-21. https://doi.org/10.4334/JKCI.2014.26.1.013
  10. Yoo, S., & Lee, H. (2014). Experiment of Flexural Behavior of Reinforced Concrete Beams with High Volume Fly Ash. Journal of the Korea Concrete Institute, 26(3), 323-329. https://doi.org/10.4334/JKCI.2014.26.3.323

Cited by

  1. Effect of High-Temperature Curing Methods on the Compressive Strength Development of Concrete Containing High Volumes of Ground Granulated Blast-Furnace Slag vol.2017, 2017, https://doi.org/10.1155/2017/7210591