DOI QR코드

DOI QR Code

Design of boundary combined footings of trapezoidal form using a new model

  • Rojas, Arnulfo Luevanos (Faculty of Engineering, Science and Architecture, Juarez University of Durango State, Av. Universidad S/N)
  • 투고 : 2014.12.28
  • 심사 : 2015.10.30
  • 발행 : 2015.12.10

초록

This paper presents the design of reinforced concrete combined footings of trapezoidal form subjected to axial load and moments in two directions to each column using a new model to consider soil real pressure acting on the contact surface of the footing; such pressure is presented in terms of an axial load, moment around the axis "X" and moment around the axis "Y" to each column. The classical model considers an axial load and moment around the axis "X" (transverse axis) applied to each column, and when the moments in two directions are taken into account, the maximum pressure throughout the contact surface of the footing is considered the same. The main part of this research is that the proposed model considers soil real pressure and the classical model takes into account the maximum pressure, and also is considered uniform. We conclude that the proposed model is more suited to the real conditions and is more economical.

키워드

참고문헌

  1. ACI 318S-13 (American Concrete Institute) (2013), Building Code Requirements for Structural Concrete and Commentary, Committee 318.
  2. Agrawal, R. and Hora, M.S. (2012), "Nonlinear interaction behaviour of infilled frame-isolated footings-soil system subjected to seismic loading", Struct. Eng. Mech., 44(1), 85-107. https://doi.org/10.12989/sem.2012.44.1.085
  3. Bowles, J.E. (2001), Foundation analysis and design, McGraw-Hill, New York.
  4. Calabera-Ruiz, J. (2000), Calculo de Estructuras de Cimentacion, Intemac Ediciones, Mexico.
  5. Chen, W.R., Chen, C.S and Yu, S.Y. (2011), "Nonlinear vibration of hybrid composite plates on elastic foundations", Struct. Eng. Mech., 37(4), 367-383. https://doi.org/10.12989/sem.2011.37.4.367
  6. Das, B.M., Sordo-Zabay, E. and Arrioja-Juarez, R. (2006), Principios de ingenieria de cimentaciones, Cengage Learning Latin America, Mexico.
  7. Gambhir, M.L. (2008), Fundamentals of Reinforced Concrete Design, Prentice-Hall, of India Private Limited.
  8. Gere, J.M. and Goodno, B.J. (2009), Mecanica de Materiales, Cengage Learning, Mexico.
  9. Gonzalez-Cuevas, O.M. and Robles-Fernandez-Villegas, F. (2005), Aspectos fundamentales del concreto reforzado, Limusa, Mexico.
  10. Guler, K. and Celep, Z. (2005), "Response of a rectangular plate-column system on a tensionless Winkler foundation subjected to static and dynamic loads", Struct. Eng. Mech., 21(6), 699-712. https://doi.org/10.12989/sem.2005.21.6.699
  11. Kurian, N.P. (2005), Design of foundation systems, Alpha Science Int'l Ltd., India.
  12. Luevanos-Rojas, A. (2012a), "A Mathematical model for dimensioning of footings square", I.RE.C.E., 3(4), 346-350.
  13. Luevanos-Rojas, A. (2012b), "A mathematical model for the dimensioning of circular footings", Far East J. Mat. Sci., 71(2), 357-367.
  14. Luevanos-Rojas, A. (2013), "A mathematical model for dimensioning of footings rectangular", ICIC Express Lett. Part B: Appl., 4(2), 269-274.
  15. Luevanos-Rojas, A., Faudoa-Herrera, J.G., Andrade-Vallejo, R.A. and Cano-Alvarez M.A. (2013), "Design of isolated footings of rectangular form using a new model", Int. J. Innov. Comput. I., 9(10), 4001-4022.
  16. Luevanos-Rojas, A. (2014a), "A comparative study for dimensioning of footings with respect to the contact surface on soil", Int. J. Innov. Comput. I., 10(4), 1313-1326.
  17. Luevanos-Rojas, A. (2014b), "Design of isolated footings of circular form using a new model", Struct. Eng. Mech., 52(4), 767-786. https://doi.org/10.12989/sem.2014.52.4.767
  18. Luevanos-Rojas, A. (2014c), "Design of boundary combined footings of rectangular shape using a new model", Dyna-Colombia, 81(188), 199-208.
  19. Maheshwari, P. and Khatri, S. (2012), "Influence of inclusion of geosynthetic layer on response of combined footings on stone column reinforced earth beds", Geomech. Eng., 4(4), 263-279. https://doi.org/10.12989/gae.2012.4.4.263
  20. McCormac, J.C. and Brown, R.H. (2013), Design of Reinforced Concrete, John Wiley & Sons, New York.
  21. Mohamed, F.M.O., Vanapalli, S.K. and Saatcioglu, M. (2013), "Generalized Schmertmann equation for settlement estimation of shallow footings in saturated and unsaturated sands", Geomech. Eng., 5(4), 363-377. https://doi.org/10.12989/gae.2013.5.4.363
  22. Orbanich, C.J., Dominguez, P.N. and Ortega, N.F. (2012), "Strenghtening and repair of concrete foundation beams whit fiber composite materials", Mater. Struct., 45, 1693-1704. https://doi.org/10.1617/s11527-012-9866-6
  23. Orbanich, C.J. and Ortega, N.F. (2013), "Analysis of elastic foundation plates with internal and perimetric stiffening beams on elastic foundations by using Finite Differences Method", Struct. Eng. Mech., 45(2), 169-182. https://doi.org/10.12989/sem.2013.45.2.169
  24. Piskunov, N. (2004), Calculo Diferencial e Integral - Tomos 1 y 2, Limusa, Mexico.
  25. Punmia, B.C., Ashok, K.J. and Arun, K.J. (2007), Limit State Design of Reinforced Concrete, Laxmi Publications (P) Limited, New Delhi, India.
  26. Rad, A.B. (2012), "Static response of 2-D functionally graded circular plate with gradient thickness and elastic foundations to compound loads", Struct. Eng. Mech., 44(2), 139-161. https://doi.org/10.12989/sem.2012.44.2.139
  27. Shahin M.A. and Cheung E.M. (2011), "Stochastic design charts for bearing capacity of strip footings", Geomech. Eng., 3(2), 153-167. https://doi.org/10.12989/gae.2011.3.2.153
  28. Smith-Pardo, J.P. (2011), "Performance-based framework for soil-structure systems using simplified rocking foundation models", Struct. Eng. Mech., 40(6), 763-782. https://doi.org/10.12989/sem.2011.40.6.763
  29. Tomlinson, M.J. (2008), Cimentaciones, Diseno y Construccion, Trillas, Mexico.
  30. Varghese, P.C. (2009), Design of reinforced concrete foundations, PHI Learning Pvt. Ltd., New Delhi, India.
  31. Zhang, L., Zhao, M.H., Xiao, Y. and Ma, B.H. (2011), "Nonlinear analysis of finite beam resting on Winkler with consideration of beam-soil interface resistance effect", Struct. Eng. Mech., 38(5), 573-592. https://doi.org/10.12989/sem.2011.38.5.573

피인용 문헌

  1. A comparative study for design of boundary combined footings of trapezoidal and rectangular forms using new models vol.6, pp.4, 2017, https://doi.org/10.12989/csm.2017.6.4.417