DOI QR코드

DOI QR Code

Robust optimization of reinforced concrete folded plate and shell roof structure incorporating parameter uncertainty

  • Bhattacharjya, Soumya (Department of Civil Engineering, Indian Institute of Engineering Science and Technology) ;
  • Chakrabortia, Subhasis (Department of Civil Engineering, Indian Institute of Engineering Science and Technology) ;
  • Dasb, Subhashis (Department of Civil Engineering, Indian Institute of Engineering Science and Technology)
  • 투고 : 2014.09.24
  • 심사 : 2015.10.30
  • 발행 : 2015.12.10

초록

There is a growing trend of considering uncertainty in optimization process since last few decades. In this regard, Robust Design Optimization (RDO) scheme has gained increasing momentum because of its virtue of improving performance of structure by minimizing the variation of performance and ensuring necessary safety and feasibility of constraint under uncertainty. In the present study, RDO of reinforced concrete folded plate and shell structure has been carried out incorporating uncertainty in the relevant parameters by Monte Carlo Simulation. Folded plate and shell structures are among the new generation popular structures often used in aesthetically appealing constructions. However, RDO study of such important structures is observed to be scarce. The optimization problem is formulated as cost minimization problem subjected to the force and displacements constraints considering dead, live and wind load. Then, the RDO is framed by simultaneously optimizing the expected value and the variation of the performance function using weighted sum approach. The robustness in constraint is ensured by adding suitable penalty term and through a target reliability index. The RDO problem is solved by Sequential Quadratic Programming. Subsequently, the results of the RDO are compared with conventional deterministic design approach. The parametric study implies that robust designs can be achieved by sacrificing only small increment in initial cost, but at the same time, considerable quality and guarantee of the structural behaviour can be ensured by the RDO solutions.

키워드

참고문헌

  1. Abbasnia, R., Shayanfar, M. and Khodam, A. (2014), "Reliability-based design optimization of structural systems using a hybrid genetic algorithm", Struct. Eng. Mech., 52(6), 1099-1120. https://doi.org/10.12989/sem.2014.52.6.1099
  2. Bar-Yoseph, P. and Hersckovitz, I. (1989), "Analysis of folded plate structures", Thin Wall. Struct., 7(2), 139-158. https://doi.org/10.1016/0263-8231(89)90016-5
  3. Bergamini, A. and Biondini, F. (2004), "Finite strip modelling for optimal design of pre-stressed folded plate structures", J. Eng. Struct., 26(8), 1043-1054. https://doi.org/10.1016/j.engstruct.2004.03.005
  4. Bertagnoli, G., Giordano, L. and Mancini, S. (2013), "Skew reinforcement optimization in concrete shells subject to uncertain loading conditions", Proceedings of the Third International Conference on Soft Computing Technology in Civil, Structural and Environmental Engineering, Ed. Y. Tsompanakis, Civil-Comp Press, Stirlingshire, UK.
  5. Beyer, H. and Sendhoff, B. (2007), "Robust optimization- a comprehensive survey", Comput. Meth. Appl. Mech. Eng., 196(33-34), 3190-3218. https://doi.org/10.1016/j.cma.2007.03.003
  6. Bhattacharjya, S. (2010), "Robust optimization of structure under uncertainty", PhD Dissertation, Bengal Engineering and Science University, Shibpur, India.
  7. Bhattacharjya, S. and Chakraborty, S. (2011), "Robust optimization of structures subjected to stochastic earthquake with limited information on system parameter uncertainty", Eng. Optim., 43(12), 1311-1330. https://doi.org/10.1080/0305215X.2011.554545
  8. Chakraborty, S., Bhattacharjya, S. and Halder, A. (2012), "Sensitivity importance-based robust optimization of structures with incomplete probabilistic information", Int. J. Numer. Meth. Eng., 90(10), 1207-1320. https://doi.org/10.1002/nme.3357
  9. Chen, W., Sahai, A., Messac, A. and Sundararaj, G. J. (2000), "Exploration of the effectiveness of physical programming in robust design", ASME J. Mech. Des., 122 (2), 155-162. https://doi.org/10.1115/1.533565
  10. Deb, K., Pratap, A., Agarwal, S. and Meyariva, T. (2002), "A fast and elitist multi-objective genetic algorithm: NSGA-II", IEEE Tran. Evol. Comput., 6(2), 182-197. https://doi.org/10.1109/4235.996017
  11. Debbarma, R. and Chakraborty, S. (2015), "Robust design of liquid column vibration absorber in seismic vibration mitigation considering random system parameter", Struct. Eng. Mech., 53(6), 1127-1141 https://doi.org/10.12989/sem.2015.53.6.1127
  12. Doltsinis, I., Kang, Z. and Cheng, G. (2005), "Robust design of non-linear structures using optimization methods", Comput. Meth. Appl. Mech. Eng., 194(12-16), 1779-1795. https://doi.org/10.1016/j.cma.2004.02.027
  13. Du, X. and Chen, W. (2000), "Towards a better understanding of modeling feasibility robustness in engineering design", ASME J. Mech. Des., 122(4), 385-394. https://doi.org/10.1115/1.1290247
  14. Elishakoff, I. and Ren, Y. (2003), Finite Element Methods for Structures with Large Stochastic Variations, Oxford University Press, New York.
  15. Ellingwood, B.R., Galambos, T.V., MacGregor, J.G. and Cornell, C.A. (1980), "Development of probability based load criterion for American National Standard A 58", NBS Special Publication 577, U.S. Department of Commerce, Washington, DC.
  16. Ghosh, R., Chakraborty, S. and Bhattacharyya, B. (2001), "Stochastic sensitivity analysis of structures using first-order perturbation", 36, 291-296. https://doi.org/10.1023/A:1013951114519
  17. Gunawan, S. and Azarm, S. (2005), "Multi-objective robust optimization using a sensitivity region concept", Struct. Multidisc. Optim., 29(1), 50-60. https://doi.org/10.1007/s00158-004-0450-8
  18. Hinton, E., O zakca, M. and Rao, N.V.R. (1995), "Free vibration analysis and shape optimization of variable thickness prismatic folded plates and curved shells Part I:finite strip formulation", J. Sound Vib., 181(4), 553-556. https://doi.org/10.1006/jsvi.1995.0157
  19. Hirschen, K. and Schafer, M. (2006), "A study on evolutionary multi-objective optimization for flow geometry design", Comput. Mech., 37, 131-141. https://doi.org/10.1007/s00466-005-0684-3
  20. Huang, B. and Du, X. (2007), "Analytical robustness assessment for robust design", Struct. Multidisc. Optim., 34(2), 123-137. https://doi.org/10.1007/s00158-006-0068-0
  21. IS 456 (2000), Plain And Reinforced Concrete - Code Of Practice Is An Indian Standard Code Of Practice For General Structural Use Of Plain And Reinforced Concrete, BIS, India.
  22. IS 875, Part 3 (1987), Code Of Practice For Design Loads (Other Than Earthquake) For Buildings And Structures, Part 3: Wind Loads (Second Revision), BIS, India.
  23. IS 2210 (1988), Criteria for Design of Reinforced Concrete Shell Structure and Folded Plates, BIS, India.
  24. Kaveh, A., Bakhshpoori, T. and Afshari, E. (2015), "Hybrid PSO and SSO algorithm for truss layout and size optimization considering dynamic constraints", Struct. Eng. Mech., 54(3), 453-474 https://doi.org/10.12989/sem.2015.54.3.453
  25. Kouchakzadeh, M.A. and Shakouri, M. (2015), "Analytical solution for axisymmetric buckling of joined conical shells under axial compression", Struct. Eng. Mech., 54(4), 649-664. https://doi.org/10.12989/sem.2015.54.4.649
  26. Kripka, M. and Pravia, Z.M.C. (2013), "Cold-formed steel channel columns optimization with simulated annealing method", Struct. Eng. Mech., 48(3), 383-394. https://doi.org/10.12989/sem.2013.48.3.383
  27. Kutylowski, R. and Rasiak, B. (2014), "Application of topology optimization to bridge girder design", Struct. Eng. Mech., 51(1), 39-66. https://doi.org/10.12989/sem.2014.51.1.039
  28. Lakshmy, T.K. and Bhavikatti, S.S. (1995), "Optimum design of trough type folded plate roofs", Comput. Struct., 57(1), 125-130 https://doi.org/10.1016/0045-7949(94)00598-W
  29. Lakshmi, K. and Rao, A.R.M. (2012), "Multi-objective optimal design of laminate composite shells and stiffened shells", Struct. Eng. Mech., 43(6), 771-794. https://doi.org/10.12989/sem.2012.43.6.771
  30. Lee, K. and Park, G. (2001), "Robust optimization considering tolerances of design variable", Comput. Struct., 79(1), 77-86. https://doi.org/10.1016/S0045-7949(00)00117-6
  31. Martinez-Martin, F., Gonzalez-Vidosa, F., Hospitaler, A. and Yepes, V. (2013), "A parametric study of optimum tall piers for railway bridge viaducts", Struct. Eng. Mech., 45(6), 723-740. https://doi.org/10.12989/sem.2013.45.6.723
  32. Mautea, K., Weickuma, G. and Eldre, M. (2009), "A reduced-order stochastic finite element approach for design optimization under uncertainty", Struct. Saf., 31(6), 450-459. https://doi.org/10.1016/j.strusafe.2009.06.004
  33. Meng, Z., Peng, H., Li, G., Wang, B. and Zhang, K. (2015), "Non-probabilistic reliability-based design optimization of stiffened shells under buckling constraint", Thin Wall. Struct., 94, 325-333. https://doi.org/10.1016/j.tws.2015.04.031
  34. Messac, A. and Ismail-Yahaya, A. (2002), "Multi objective robust design using physical programming", Struct. Multidis. Optim., 23(5), 357-371. https://doi.org/10.1007/s00158-002-0196-0
  35. Milasinovic, D.D. and Goles, D. (2012), "Finite strip modeling for optimal design of reinforced concrete folded plate structures", J. FACTA Universitatis, Series: Arch. Civil Eng., 10(3), 275-290. https://doi.org/10.2298/FUACE1203275M
  36. Papadopoulos, V. and Lagaros, N.D. (2009), "Vulnerability-based robust design optimization of imperfect shell structures", Struct. Saf. Optim. Uncert. Emph. Struct. Appl., Special Issue: Optimization, 31(6), 475-482
  37. Pareto, V. (1906), "Manuale di Economica Politica", Societa Editrice Libraria, Milan, translated into English by A.S. Schwier as Manual of Political Economy, Eds. A.S. Schwier and A.N. Page, New York.
  38. Park, G.J., Lee, T.H., Lee, K. and Hwang, K.H. (2006), "Robust design: an overview", AIAA J., 44(1), 181-191. https://doi.org/10.2514/1.13639
  39. Sheikhi, M. and Ghoddosian, A. (2013), "A hybrid imperialist competitive ant colony algorithm for optimum geometry design of frame structures", Struct. Eng. Mech., 46(3), 403-416. https://doi.org/10.12989/sem.2013.46.3.403
  40. Sundaresan, S., Ishii, K. and Houser, D.R. (1995), "A robust optimization procedure with variations on design variables and constraints", Eng. Optim., 24(2), 101-117. https://doi.org/10.1080/03052159508941185
  41. Taguchi, G. (1993), On Robust Technology Development, Bringing Quality Engineering Upstream, ASME Press, New York.
  42. Tejani, A. and Parikh, A.A. (2013), "Computer-aided wind load analysis on reinforced concrete folded plate", J. PARIPEX-Ind. J. Res., 3(4), 87-90.
  43. Tomas, A. and Marti, P. (2010), "Shape and size optimisation of concrete shells", Eng. Struct, 32(6), 1650-1658. https://doi.org/10.1016/j.engstruct.2010.02.013
  44. Varghese, P.C. (2013), Design of Reinforced Concrete Shells and Folded Plates, PHI Learning Pvt. Ltd., India.
  45. Velimirovic, L., Radivojevic, G. and Kostic, D. (1998), "Analysis of hyperbolic paraboloids at small deformations", Sci. J. Facta Univ., Series: Arch. Civil Eng., 1(5), 627-636.
  46. Wang, L. and Kodiyalam, S. (2002), "An efficient method for probabilistic and robust design with nonnormal distributions", Proc. 43rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials, Denever, Colorado.
  47. Wang, W.M., Peng, Y.H., Hu, J. and Cao, Z.M. (2009), "Collaborative robust optimization under uncertainty based on generalized dynamic constraints network", Struct. Multidisc. Optim., 38(2), 159-170. https://doi.org/10.1007/s00158-008-0271-2
  48. Wu, J., Lu, X.Y., Li, S.C., Zhang, D.L., Xu, Z.H., Li, L.P. and Xue, Y.G. (2015), "Shape optimization for partial double-layer spherical reticulated shells of pyramidal system", Struct. Eng. Mech., 55(3), 555-581. https://doi.org/10.12989/sem.2015.55.3.555
  49. Zang, C., Friswell, M.I. and Mottershead, J.E. (2005), "A review of robust optimal design and its application in dynamics", Comput. Struct., 83(4-5), 315-326. https://doi.org/10.1016/j.compstruc.2004.10.007

피인용 문헌

  1. Structural robust optimization design based on convex model vol.7, 2017, https://doi.org/10.1016/j.rinp.2017.08.013
  2. Spatial variability analysis of soil strength to slope stability assessment vol.12, pp.3, 2015, https://doi.org/10.12989/gae.2017.12.3.483
  3. DOProC-based reliability analysis of structures vol.64, pp.4, 2015, https://doi.org/10.12989/sem.2017.64.4.413
  4. Modern computer simulation for the design of concrete catenary shell structures vol.21, pp.6, 2018, https://doi.org/10.12989/cac.2018.21.6.661
  5. An efficient robust cost optimization procedure for rice husk ash concrete mix vol.23, pp.6, 2019, https://doi.org/10.12989/cac.2019.23.6.433