Korean Journal of Materials Research (한국재료학회지)

Materials Research Society of Korea (한국재료학회)
권호 표지
DOI QR코드

DOI QR Code

Influence of Nb Addition and Austenitizing Temperature on the Hardenability of Low-Carbon Boron Steels

저탄소 보론강의 경화능에 미치는 Nb 첨가와 오스테나이트화 온도의 영향

  • Hwang, Byoungchul (Department of Materials Science and Engineering, Seoul National University of Science and Technology)
  • 황병철 (서울과학기술대학교 신소재공학과)
  • Received : 2015.09.07
  • Accepted : 2015.09.09
  • Published : 2015.11.27
Download PDF
⟨ Previous Next ⟩

Abstract

The present study is concerned with the influence of niobium(Nb) addition and austenitizing temperature on the hardenability of low-carbon boron steels. The steel specimens were austenitized at different temperatures and cooled with different cooling rates using dilatometry; their microstructures and hardness were analyzed to estimate the hardenability. The addition of Nb hardly affected the transformation start and finish temperatures at lower austenitizing temperatures, whereas it significantly decreased the transformation finish temperature at higher austenitizing temperatures. This could be explained by the non-equilibrium segregation mechanism of boron atoms. When the Nb-added boron steel specimens were austenitized at higher temperatures, it is possible that Nb and carbon atoms present in the austenite phase retarded the diffusion of carbon towards the austenite grain boundaries during cooling due to the formation of NbC precipitate and Nb-C clusters, thus preventing the precipitation of $M_{23}(C,B)_6$ along the austenite grain boundaries and thereby improving the hardenability of the boron steels. As a result, because it considerably decreases the transformation finish temperature and prohibits the nucleation of proeutectoid ferrite even at the slow cooling rate of $3^{\circ}C/s$, irrespective of the austenitizing temperature, the addition of 0.05 wt.% Nb had nearly the same hardenability-enhancing effect as did the addition of 0.2 wt.% Mo.

Keywords

References

  1. D. V. Doane and J. S. Kirkaldy, Hardenability Concepts with Application to Steel, TMS-AIME, Warrendale, PA (1978).
  2. S. K. Banerji and J. E. Morral, Proc. Int. Symp. Boron in Steels, TMS-AIME, PA (1979).
  3. G. Krauss, Steels: Heat Treatment and Processing Principles, ASM Intl. (1990).
  4. D. H. Werner, Boron and Boron Containing Steels, Verlag Stahleisen mbH, Dusseldorf (1995).
  5. Front of Research on Behavior of Boron in Steels, Iron Steel Inst. Jpn. (2003).
  6. H. Asahi, ISIJ Int., 42, 1150 (2002). https://doi.org/10.2355/isijinternational.42.1150
  7. B. Hwang, D-W. Suh and S-J. Kim, Scr. Mater., 64, 1118 (2011). https://doi.org/10.1016/j.scriptamat.2011.03.003
  8. Y-K. Lee, J. Mater. Sci. Lett., 21, 1253 (2002). https://doi.org/10.1023/A:1016555119230
  9. J. C. Ion and L. M. Anisdahl, J. Mat. Proc. Tech., 65, 261 (1997). https://doi.org/10.1016/S0924-0136(96)02413-2
  10. T. Gladman, The Physical Metallurgy of Microalloyed Steels, Maney Publishing (2002).
  11. S. Khare, K. Lee and H. K. D. H. Bhadeshia, Int. J. Mat. Res., 100, 11 (2009). https://doi.org/10.3139/146.101793
  12. T. Hara, H. Asahi, R. Uemori and H. Tamehiro, ISIJ Int., 44, 1431 (2004). https://doi.org/10.2355/isijinternational.44.1431
  13. L. Karlsson, H. Norden and H. Odelius, Acta Metall., 36, 1 (1988). https://doi.org/10.1016/0001-6160(88)90023-5
  14. C. Fossaert, G. Rees, T. Maurickx and H. K. D. H Bhadeshia, Metall. Mater. Trans. A, 26, 21 (1995). https://doi.org/10.1007/BF02669791