DOI QR코드

DOI QR Code

Parametric study on eccentrically-loaded partially encased composite columns under major axis bending

  • Begum, Mahbuba (Department of Civil Engineering, BUET) ;
  • Driver, Robert G. (Department of Civil and Environmental Engineering, University of Alberta) ;
  • Elwi, Alaa E. (Department of Civil and Environmental Engineering, University of Alberta)
  • 투고 : 2014.01.08
  • 심사 : 2015.05.20
  • 발행 : 2015.11.25

초록

This paper presents a detailed parametric study, conducted using finite element tools to cover a range of several geometric and material parameters, on the behaviour of thin-walled partially encased composite (PEC) columns. The PEC columns studied herein are composed of thin-walled built-up H-shaped steel sections with concrete infill cast between the flanges. Transverse links are provided between the opposing flanges to improve resistance to local buckling. The parametric study is confined to eccentrically-loaded columns subjected to major axis bending only. The parameters that were varied include the overall column slenderness ratio (L/d), load eccentricity ratio (e/d), link spacing-to-depth ratio (s/d), flange plate slenderness ratio (b/t) and concrete compressive strength ($f_{cu}$). The overall column slenderness ratio was chosen to be the primary variable with values of 5, 10 and 15. Other parameters were varied within each case of L/d ratio. The effects of the selected parameters on the behaviour of PEC columns were studied with respect to the failure mode, peak axial load, axial load versus average axial strain response, axial load versus lateral displacement response, moment versus lateral displacement behaviour and the axial load-moment interaction diagram. The results of the parametric study are presented in the paper and the influences of each of the parameters investigated are discussed.

키워드

참고문헌

  1. ACI (1992) ACI Committee 363. State-of-the-Art Report on High-Strength Concrete, ACI 363R-92, Farmington Hills, MI, USA, pp.1-55.
  2. Almusallam, T.H. and Alsayed, S.H. (1995), "Stress-Strain Relationship of Normal, High Strength and Lightweight concrete", Mag. Concrete Res., 47(170), 39-44. https://doi.org/10.1680/macr.1995.47.170.39
  3. Begum, M., Driver, R.G. and Elwi, A.E. (2007), "Finite element modeling of partially encased composite columns using the dynamic explicit solution method", J. Struct. Eng., ASCE, 133(3), 326-334. https://doi.org/10.1061/(ASCE)0733-9445(2007)133:3(326)
  4. Bouchereau, R. and Toupin, J.-D. (2003), "Etude du Comportement en Compression-Flexion des Poteaux Mixtes Partiellement Enrobes", Report EPM/GCS-2003-03; Department of Civil, Geological and Mining Engineering, Ecole Polytechnique, Montreal, Canada.
  5. Chen, Y., Wang, T., Yang, J. and Zhao, X. (2010), "Test and numerical simulation of partially encased composite columns subject to axial and cyclic horizontal loads", Int. J. Steel Struct., 10(4), 385-393. https://doi.org/10.1007/BF03215846
  6. Chicoine, T., Tremblay, R. and Massicotte, B. (2002), "Finite element modelling and design of partially encased composite columns", Steel Compos. Struct., Int. J., 2(3), 171-194. https://doi.org/10.12989/scs.2002.2.3.171
  7. Chicoine, T., Massicotte, B. and Tremblay, R. (2003), "Long-term behavior and strength of partiallyencased composite columns with built up shapes", J. Struct. Eng., ASCE, 129(2), 141-150. https://doi.org/10.1061/(ASCE)0733-9445(2003)129:2(141)
  8. Correia, A.J.P.M. and Rodrigues, J.P.C. (2011), "Fire resistance of partially encased steel columns with restrained thermal elongation", J. Construct. Steel Res., 67(4), 593-601. https://doi.org/10.1016/j.jcsr.2010.12.002
  9. CSA (2009), Design of Steel Structures, CSA S16-09; Canadian Standards Association, Mississauga, ON, Canada.
  10. Dastfan, M. and Driver, R.G. (2010a), "Large scale test of a modular steel plate shear wall with PEC columns", Proceedings of the 9th US National and 10th Canadian Conference on Earthquake Engineering, Toronto, ON, Canada, July.
  11. Dastfan, M. and Driver, R.G. (2010b), "Large scale test of a steel plate shear wall with PEC columns and RBS connections", Proceedings of Annual Stability Conference, Structural Stability Research Council, Orlando, FL, USA, May.
  12. Deng, X., Dastfan, M. and Driver, R.G. (2008), "Behaviour of steel plate shear walls with composite columns", Proceedings of American Society of Civil Engineers Structures Congress, Vancouver, BC, Canada, April.
  13. Prickett, B.S. and Driver, R.G. (2006), "Behaviour of partially encased composite columns made with high performance concrete", Structural Engineering Report No 262; Department of Civil and Environmental Engineering, University of Alberta, AB, Canada.
  14. Rashid, M.A., Mansur, M.A. and Paramasivum, P. (2002), "Correlation between mechanical properties of high strength concrete", J. Mater. Civil Eng., ASCE, 14(3), 230-238. https://doi.org/10.1061/(ASCE)0899-1561(2002)14:3(230)
  15. Tremblay, R., Massicotte, B., Filion, I. and Maranda, R. (1998), "Experimental study on the behaviour of partially encased composite columns made with light welded h-steel shapes under compressive axial loads", Proceedings of SSRC Annual Technical Session & Meeting, Atlanta, GA, USA, September, pp. 195-204.
  16. Uy, B. (2001), "Local and postlocal buckling of fabricated steel and composite cross sections", J. Struct. Eng., 127(6), 666-677. https://doi.org/10.1061/(ASCE)0733-9445(2001)127:6(666)
  17. Young, B. and Ellobody, E. (2011), "Performance of axially restrained concrete encased steel composite columns at elevated temperatures", Eng. Struct. J., 33(1), 245-254. https://doi.org/10.1016/j.engstruct.2010.10.019
  18. Zhao, G. and Feng, C. (2012), "Axial ultimate capacity of partially encased composite columns", Appl. Mech. Mater., 166-169, 292-295. https://doi.org/10.4028/www.scientific.net/AMM.166-169.292

피인용 문헌

  1. Local and post-local buckling behavior of welded steel shapes in partially encased composite columns vol.108, 2016, https://doi.org/10.1016/j.tws.2016.08.003
  2. Numerical Study and Design Recommendations of Eccentrically Loaded Partially Encased Composite Columns pp.2093-6311, 2018, https://doi.org/10.1007/s13296-018-0179-7
  3. Equalizing Octagonal PEC Columns with Steel Columns: Experimental and Theoretical Study vol.23, pp.3, 2018, https://doi.org/10.1061/(ASCE)SC.1943-5576.0000375
  4. Experimental behavior of VHSC encased composite stub column under compression and end moment vol.31, pp.1, 2019, https://doi.org/10.12989/scs.2019.31.1.069
  5. Research on Application of Uplift-Restricted Slip-Permitted (URSP) Connectors in Steel-Concrete Composite Frames vol.9, pp.11, 2019, https://doi.org/10.3390/app9112235
  6. Partially encased composite columns using fiber reinforced concrete: experimental study vol.34, pp.6, 2015, https://doi.org/10.12989/scs.2020.34.6.909
  7. Flexural behavior of partially prefabricated partially encased composite beams vol.38, pp.6, 2015, https://doi.org/10.12989/scs.2021.38.6.705