Steel and Composite Structures

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

Investigation of stiffening scheme effectiveness towards buckling stability enhancement in tubular steel wind turbine towers

  • Stavridou, Nafsika (Department of Civil Engineering, Aristotle University of Thessaloniki) ;
  • Efthymiou, Evangelos (Department of Civil Engineering, Aristotle University of Thessaloniki) ;
  • Gerasimidis, Simos (Department of Civil Engineering, Aristotle University of Thessaloniki) ;
  • Baniotopoulos, Charalampos C. (Department of Civil Engineering, Aristotle University of Thessaloniki)
  • Received : 2014.08.27
  • Accepted : 2015.04.23
  • Published : 2015.11.25
⟨ Previous Next ⟩

Abstract

Current climate conditions along with advances in technology make further design and verification methods for structural strength and reliability of wind turbine towers imperative. Along with the growing interest for "green" energy, the wind energy sector has been developed tremendously the past decades. To this end, the improvement of wind turbine towers in terms of structural detailing and performance result in more efficient, durable and robust structures that facilitate their wider application, thus leading to energy harvesting increase. The wind tower industry is set to expand to greater heights than before and tapered steel towers with a circular cross-section are widely used as more capable of carrying heavier loads. The present study focuses on the improvement of the structural response of steel wind turbine towers, by means of internal stiffening. A thorough investigation of the contribution of stiffening rings to the overall structural behavior of the tower is being carried out. These stiffening rings are placed along the tower height to reduce local buckling phenomena, thus increasing the buckling strength of steel wind energy towers and leading the structure to a behavior closer to the one provided by the beam theory. Additionally to ring stiffeners, vertical stiffening schemes are studied to eliminate the presence of short wavelength buckles due to bending. For the purposes of this research, finite element analysis is applied in order to describe and predict in an accurate way the structural response of a model tower stiffened by internal stiffeners. Moreover, a parametric study is being performed in order to investigate the effect of the stiffeners' number to the functionality of the aforementioned stiffening systems and the improved structural behavior of the overall wind converter.

Keywords

References

  1. Arani, A.G., Loghman, A., Barzoki, A.M. and Kolahchi, R. (2010), "Elastic buckling analysis of ring and stringer-stiffened cylindrical shells under general pressure and axial compression via the Ritz method", J. Solid Mech., 2(4), 332-347.
  2. Arasu, P., Sagayaraj, D. and Gowrishankar, J. (2011), "Seismic analysis of a wind turbine steel tower", Proceedings of the HyperWorks Technology Conference, Pune, India, August.
  3. Bazant, Z. and Cedolin, L. (2010), Stability of Structures. Elastic, Inelastic, Fracture and Damage Theories, World Scientific, Singapore.
  4. Bazeos, N., Hatzigeorgiou, G., Hondros, I., Karamaneas, H., Karabalis D.L. and Beskos, D. (2002), "Static, seismic and stability analyses of a prototype wind turbine steel tower", Eng. Struct., 24(8), 1015-1025. https://doi.org/10.1016/S0141-0296(02)00021-4
  5. Bushnell, D. (1976), "Buckling of elastic-plastic shells of revolution with discrete elastic-plastic ring stiffeners", Int. J. Solids Struct., 12(1), 51-66. https://doi.org/10.1016/0020-7683(76)90072-X
  6. Calladine, C. (1989), Theory of Shell Structures, Cambridge University Press, Cambridge, England.
  7. Chen, L. and Rotter, J.M. (2012), "Buckling of anchored cylindrical shells of uniform thickness under wind load", Eng. Struct., 41, 199-208. https://doi.org/10.1016/j.engstruct.2012.03.046
  8. Chen, L., Doerich, C. and Rotter, J.M. (2008), "A study of cylindrical shells under global bending in the elastic-plastic range", Steel Construct., 1(1), 59-65. https://doi.org/10.1002/stco.200890008
  9. Chen, L., Rotter, J.M. and Doerich, C. (2011), "Buckling of cylindrical shells with stepwise variable thickness under uniform external pressure", Eng. Struct., 33(12), 3570-3578. https://doi.org/10.1016/j.engstruct.2011.07.021
  10. Dimopoulos, C. and Gantes, C. (2012), "Experimental investigation of buckling of wind turbine tower cylindrical shells with opening and stiffening under bending", Thin-Wall. Struct., 54, 140-155. https://doi.org/10.1016/j.tws.2012.02.011
  11. Dimopoulos, C. and Gantes, C. (2013), "Comparison of stiffening types of the cutout in tubular wind turbine towers", J. Construct. Steel Research, 83, 62-74. https://doi.org/10.1016/j.jcsr.2012.12.016
  12. DNV-RP-C202 (2013), Buckling Strength of Shells, DNV-GL.
  13. Documentation, Abaqus, and User Manual (2012), Version 6.12, Simulia, DassaultSystemes.
  14. European Convention for Constructional Steelwork (2008), Buckling of Steel Shells: European Recommendations, ECCS Publications; Brussels, Belgium.
  15. EN 1991-01-01 (2005), Eurocode 1: Actions on structures: Part 1-4: General actions-Wind actions, CEN.
  16. EN 1993-01-06 (2006), Eurocode 3: Design of Steel Structures: Part1-6: General Strength and Stability of Shell Structures, CEN.
  17. EN 1993-03-02 (2006), Eurocode 3: Design of Steel Structures: Part3-2: Towers, masts and chimneys-Chimneys, CEN.
  18. Flugge, W. (1932), "Die stabilitt der kreiszylinderschale", Ing. Arch., 5, 463-506.
  19. Galambos, T. (1998), Guide to Stability Design Criteria for Metal Structures, John Wiley& Sons, NJ, USA.
  20. Jansseune, A., De Corte, W., Vanlaere, W. and Van Impe, R. (2012), "Influence of the cylinder height on the elasto-plastic failure of locally supported cylinders", Steel Compos. Struct., Int. J., 12(4), 291-302. https://doi.org/10.12989/scs.2012.12.4.291
  21. Koiter, W.T. (1945), "On the Stability of Elastic Equilibrium", Ph.D. Dissertation; Delft University, Delft, The Netherlands. [In Dutch]
  22. Lavassas, I., Nikolaidis, G., Zervas, P., Efthimiou, E., Doudoumis, I. and Baniotopoulos, C.C. (2003), "Analysis and design of the prototype of a steel 1-MW wind turbine tower", Eng. Struct., 25(8), 1097-1106. https://doi.org/10.1016/S0141-0296(03)00059-2
  23. Lee, K. and Bang, H. (2013), "A study on the prediction of lateral buckling load for wind turbine tower structures", Int. J. Prec. Eng. Manuf., 13(10), 1829-1836. https://doi.org/10.1007/s12541-012-0240-y
  24. Lemak, D. and Studnicka, J. (2005), "Influence of ring stiffeners on a steel cylindrical shell", J. Adv. Eng. -Acta Polytechnica, 45(1), 56-63.
  25. Lundquist, E. (1933), "Strength tests of thin-walled duralumin cylinders in pure bending", Tech. Rep., National Advisory Committee for Aeronautics, NACA-TN-479, USA.
  26. Negm, H. and Maalawi, K. (2000), "Structural design optimization of wind turbine towers", Comp. Struct., 74(6), 649-666. https://doi.org/10.1016/S0045-7949(99)00079-6
  27. Nuta, E., Christopoulos, C. and Packer, J. (2011), "Methodology for seismic risk assessment for tubular steel wind turbine towers: application to Canadian seismic environment", Can. J. Civ. Eng., 38(3), 293-304. https://doi.org/10.1139/L11-002
  28. Ohga, M., Wijenayaka, A.S. and Croll, J.G.A. (2005), "Buckling of sandwich cylindrical shells under axial loading", Steel Compos. Stuct., Int. J., 5(1), 1-15. https://doi.org/10.12989/scs.2005.5.1.001
  29. Ragheb, M. (2013), "Safety of wind systems", Wind Power Systems Course Material; University of Illinois at Urbana-Champaign, IL, USA.
  30. Rebelo, C., Veljkovic, M., Matos, R. and Simoes da Silva, L. (2012a), "Structural monitoring of a wind turbine steel tower - Part II: monitoring results", Wind Struct., Int. J., 12(4), 301-311.
  31. Rebelo, C., Veljkovic, M., Simoes da Silva, L., Simoes, R. and Henriques, J. (2012b), "Structural monitoring of a wind turbine steel tower - Part I: system description and calibration", Wind Struct., Int. J., 12(4), 285-299.
  32. Rotter, J. (1987), "The buckling and plastic collapse of ring stiffeners at cone/cylinder junctions", Proceedings of International Colloquium on Stability of Plate and Shell Structures, Ghent, Belgium.
  33. Schneider, W. and Brede, A. (2005), "Consistent equivalent geometric imperfections for the numerical buckling strength verification of cylindrical shells under uniform external pressure", Thin-Wall. Struct., 43(2), 175-188. https://doi.org/10.1016/j.tws.2004.08.006
  34. Schneider, W. and Zahlten, W. (2004), "Load-bearing behavior and structural analysis of slender ringstiffened cylindrical shells under quasi-static wind load", J. Construct. Steel Res., 60(1), 125-146. https://doi.org/10.1016/j.jcsr.2003.08.002
  35. Singer, J. (2004), "Stiffened cylindrical shells", In: Buckling of Thin Metal Shells, Taylor and Francis, London, England, pp. 286-343.
  36. Speicher, G. and Saal, H. (1991), "Buckling of shell structures, on land, in the sea, and in the air: 466-475, Numerical calculation of limit loads for shells of revolution with particular regard to the applying equivalent initial imperfection", Elsevier Applied Science.
  37. Stathopoulos T. and Baniotopoulos, C.C. (2007), Wind Effects on Buildings and Design of Wind-Sensitive Structures, Springer Wien, New York, USA.
  38. Stavridou, N., Efthymiou, E., Gerasimidis, S. and Baniotopoulos, C. (2013), "Modelling of the structural response of wind energy towers stiffened by internal rings", Proceedings of the 10th HSTAM International Congress on Mechanics, Chania, Greece, June.
  39. Teng, J. (1996), "Buckling of thin shells: Recent advances and trends", App. Mech. Rev., 49(4), 263-274. https://doi.org/10.1115/1.3101927
  40. Teng, J. and Rotter, J. (2004), Buckling of Thin Metal Shells, Taylor and Francis, London, England.
  41. Timoshenko, S. and Gere, J. (1961), Theory of Elastic Stability, Tata McGraw-Hill Education, Noida, UP, India.
  42. Uys, P., Farkas, J., Jrmai, K. and Van Tonder, F. (2007), "Optimisation of a steel tower for a wind turbine structure", Eng. Struct., 29(7), 1337-1342. https://doi.org/10.1016/j.engstruct.2006.08.011
  43. Veljkovic, M., Heistermann, C. and Husson, W. (2006), "High-strength tower in steel for wind turbines", Tech. Rep., Publications Office of the European Union.
  44. Vinson, J. (1988), The Behavior of Thin Walled Structures: Beams, Plates, and Shells, Springer, Dordrecht, The Netherlands.
  45. Wojcik, M., Iwicki, P. and Tejchman, J. (2011), "3D buckling analysis of a cylindrical metal bin composed of corrugated sheets strengthened by vertical stiffeners", Thin-Wall. Struct., 49(8), 947-963. https://doi.org/10.1016/j.tws.2011.03.010

Cited by

  1. Evaluation of Residual Compressive Strength and Behavior of Corrosion-Damaged Carbon Steel Tubular Members vol.11, pp.7, 2018, https://doi.org/10.3390/ma11071254
  2. Experimental assessment of I-shaped steel beams with longitudinal stiffeners under lateral-torsional buckling vol.85, pp.207, 2018, https://doi.org/10.15446/dyna.v85n207.71892
  3. Structural analysis and optimal design of steel lattice wind turbine towers vol.172, pp.8, 2015, https://doi.org/10.1680/jstbu.18.00074
  4. Life Cycle Analysis of lattice and tubular wind turbine towers. A comparative study. vol.410, pp.None, 2015, https://doi.org/10.1088/1755-1315/410/1/012071
  5. A comparative life-cycle analysis of tall onshore steel wind-turbine towers vol.4, pp.1, 2015, https://doi.org/10.1093/ce/zkz028
  6. Study of the Bearing Capacity of Stiffened Tall Offshore Wind Turbine Towers during the Erection Phase vol.13, pp.19, 2015, https://doi.org/10.3390/en13195102
  7. Lattice and Tubular Steel Wind Turbine Towers. Comparative Structural Investigation vol.13, pp.23, 2015, https://doi.org/10.3390/en13236325
  8. A Novel Tripod Concept for Onshore Wind Turbine Towers vol.14, pp.18, 2021, https://doi.org/10.3390/en14185772