References
- Kim, J.W. and Park, S.M., 2013, Dental Implants, HIDI Medical Device Market Research Report, 15, pp.1-44.
- Park, H.W., Kim, M.S. and Park, H., 2011, 3D Simulation of Dental Implant Surgery Using Surgical Guide Stents, Transactions of the Society of CAD/CAM Engineers, 16(3), pp.216-226.
- Park, H.W., Park, C.W., Kim, M.S. and Park, H., 2012, Planning of Dental Implant Placement Using 3D Geometric Processing and Finite Element Analysis, Transactions of the Society of CAD/CAM Engineers, 17(4), pp.253-261.
- Xia, J., Samman, N., Yeung, R.W., Wang, D., Shen, S.G., Ip, H.H. and Tideman, H., 2000, Computer-assisted Three-dimensional Surgical Planning and Simulation: 3D Soft Tissue Planning and Prediction, International Journal of Oral and Maxillofacial Surgery, 29(4), pp.250-258. https://doi.org/10.1016/S0901-5027(00)80023-5
- Tardieu, P.B., Vrielinck, L., Escolano, E., Henne, M. and Tardieu, A.L., 2007, Computer-assisted Implant Placement: Scan Template, Simplant, Surgiguide, and SAFE System. The International Journal of Periodontics & Restorative Dentistry, 27(2), pp.141-149.
- Digital Korean, http://dk.kisti.re.kr/
- Lorensen, W.E. and Cline, H.E., 1987, Marching Cubes: A High ResOlution 3d Surface Construction Algorithm, ACM SIGGRAPH Computer Graphics, 21(4), pp.163-169. https://doi.org/10.1145/37402.37422
- Fanuscu, M.I. and Chang, T.L., 2004, Threedimensional Morphometric Analysis of Human Cadaver Bone: Microstructural Data from Maxilla and Mandible, Clinical Oral Implants Research, 15(2), pp.213-218. https://doi.org/10.1111/j.1600-0501.2004.00969.x
- Moore, B., 1981, Principal Component Analysis in Linear Systems: Controllability, Observability, and Model Reduction, IEEE Transactions on Automatic Control, 26(1), pp.17-32. https://doi.org/10.1109/TAC.1981.1102568
- CGAL, https://www.cgal.org/
- Chan, T.M., 2000, Approximating the Diameter, Width, Smallest Enclosing Cylinder, and Minimum- width Annulus, Proceedings of the Sixteenth Annual Symposium on Computational Geometry, pp.300-309.
- Lin, Y., Zhang, S., Chen, X. and Wang, C. 2006. A Novel Method in the Design and Fabrication of Dental Splints Based on 3D Simulation and Rapid Prototyping Technology, The International Journal of Advanced Manufacturing Technology, 28(9-10), pp.919-922. https://doi.org/10.1007/s00170-004-2197-1
- Piegl, L. and Tiller, W., 1995, The NURBS Book. Springer-Verlag.
- Park, H. and Lee, J.H., 2007, B-spline Curve Fitting Based on Adaptive Curve Refinement Using Dominant Points, Computer-Aided Design, 39(6), pp.439-451. https://doi.org/10.1016/j.cad.2006.12.006
- Eraslan, O. and Inan, O., 2010, The Effect of Thread Design on Stress Distribution in a Solid Screw Implant: a 3D Finite Element Analysis, Clinical Oral Investigations, 14(4), pp.411-416. https://doi.org/10.1007/s00784-009-0305-1
- Quek, H.C., Tan, K.B. and Nicholls, J.I., 2008, Load Fatigue Performance of Four Implant-abutment Interface Designs: Effect of Torque Level and Implant System, International Journal of Oral and Maxillofacial Implants, 23(2), pp.253-262
- D'Souza, K.M. and Aras, M.A., 2012, Types of Implant Surgical Guides in Dentistry: A Review, Journal of Oral Implantology, 38(5), pp.643-652. https://doi.org/10.1563/AAID-JOI-D-11-00018
- Oh, T.J., Shotwell, J.L., Billy, E.J. and Wang, H.L., 2006, Effect of Flapless Implant Surgery on Soft Tissue Profile: A Randomized Controlled Clinical Trial, Journal of Periodontology, 77(5), pp.874-882. https://doi.org/10.1902/jop.2006.050169
-
3M ESPE,
$Lava^{TM}$ Chairside Oral Scanner C.O.S. Digital Impression System. - Galanis, C.C., Sfantsikopoulos, M.M., Koidis, P.T., Kafantaris, N.M. and Mpikos, P.G., 2007, Implant Positioning and Size Assignment. Computer Methods and Programs in Biomedicine, Computer Methods for Automating Preoperative Dental Implant Planning, 86(1), pp.30-38.