References
- N. Q. Minh and T. Takahashi, Science and Technology of Ceramic Fuel Cell, Elsevier Science, 1995.
- J. Will, A. Mitterdorfer, C. Kleinlogel, D. Perednis, and L. J. Gauckler, "Fabrication of Thin Electrolytes For Secondgeneration Solid Oxide Fuel Cells," Solid State Ionics, 131 79-96 (2000). https://doi.org/10.1016/S0167-2738(00)00624-X
-
S. P. Simmer, M. D. Anderson, M. H. Engelhard, and J. W. Stevenson, "Degradation Mechanisms of La-Sr-Co-Fe-
$O_3$ SOFC Cathodes," Electrochem. Solid-State Lett, 9 A478-81 (2006). https://doi.org/10.1149/1.2266160 - K. Huang, J. H. Wan, and J. B. Goodenough, "Increasing Power Density of LSGM-based Solid Oxide Fuel Cells Using New Anode Materials," J. Electrochem. Soc., 148 A788 (2001). https://doi.org/10.1149/1.1378289
- T. Kawada, N. Sakai, H. Yokokawa, M. Dokiya, and I. Anzai, "Fabrication of a Planar Solid Oxide Fuel Cell by Tape-casting and Co-firing Method," J. Ceram. Soc. Jpn., 100 [1162] 847-50 (1992). https://doi.org/10.2109/jcersj.100.847
- D. Rotureau, J. -P. Viricelle, C. Pijolat, N. Caillol, and M. Pijolat, "Development of a Planar SOFC Device Using Screen-printing Technology," J. Eur. Ceram. Soc. 25 [12] 2633-36 (2005). https://doi.org/10.1016/j.jeurceramsoc.2005.03.115
-
Y. J. Leng, S. H. Chan, K. A. Khor, S. P. Jiang, and P. Cheang, "Effect of Characteristics of
$Y_2O_3/ZrO_2$ Powders on Fabrication of Anode-supported Solid Oxide Fuel Cells," J. Power Sources, 117 [1/2] 26-34 (2003). https://doi.org/10.1016/S0378-7753(03)00350-1 - W. Li, K. Hasinska, M. Seabaugh, S. Swartz, and J. Lannutti, "Curvature in Solid Oxide Fuel Cells," J. Power Sources, 138 [1/2] 145-55 (2004). https://doi.org/10.1016/j.jpowsour.2004.06.034
- M. F. Carolan and J. N. Michaels, "Growth Rates and Mechanism of Electrochemical Vapor Deposited Yttria-stabilized Zirconia Films," Solid State Ionics, 37 [2/3] 189-96 (1990). https://doi.org/10.1016/0167-2738(90)90242-J
- H.Y. Jung, K. S. Hong, H. Kim, J. K. Park, J. W. Son, J. Kim, H. W. Lee, and J. H. Lee, "Characterization of Thinfilm YSZ Deposited via EB-PVD Technique in Anode-supported SOFCs," J. Electrochem. Soc., 153 [6] A961-66 (2006). https://doi.org/10.1149/1.2186209
-
T. Ishihara, K. Sato, and Y. Takita, "Electrophoretic Deposition of
$Y_2O_3$ -stabilized$ZrO_2$ Electrolyte Films in Solid Oxide Fuel Cells," J. Am. Ceram. Soc., 79 [4] 913-19 (1996). https://doi.org/10.1111/j.1151-2916.1996.tb08525.x - T. Setoguchi, M. Sawano, K. Eguchi, and H. Arai, "Application of the Stabilized Zirconia Thin Film Prepared by Spray Pyrolysis Method to SOFC," Solid State Ionics, 40-41 [1] 502-5 (1990). https://doi.org/10.1016/0167-2738(90)90390-D
- M. Gaudon, Ch. L. Robert, F. Ansart, and P. Stevens, "Thick YSZ Films Prepared Via a Modified Sol-gel Route: Thickness Control (8-80 mm)," J. Eur. Ceram. Soc., 26 3153-60 (2006). https://doi.org/10.1016/j.jeurceramsoc.2005.09.026
- G. Schiller, R. H. Henne, M. Lang, R. Ruckdaeschel, and S. Schaper, "Development of Vacuum Plasma Sprayed Thinfilm SOFC for Reduced Operating Temperature," Fuel Cells Bull., 21 [3] 7-12 (2000).
- J.-J. Choi, S.-H. Oh, H.-S. Noh, H.-R. Kim, J.-W. Son, D.-S. Park, J.-H. Choi, J. Ryu, B.-D. Hahn, W.-H. Yoon, H.-W. Lee, "Low Temperature Fabrication of Nano-structured Porous LSM-YSZ Composite Cathode Film by Aerosol Deposition," J. Alloy. Compd., 509 2627-30 (2011). https://doi.org/10.1016/j.jallcom.2010.11.169
-
J.-J. Choi, K.-S. Cho, J.-H. Choi, J. Ryu, B.-D. Hahn, J.-W. Kim, C.-W. Ahn, W.-H. Yoon, D.-S. Park, and J. Yun, "Electrochemical Effects of Cobalt Doping on
$(La,Sr)(Ga,Mg)O_{3-{\delta}}$ Electrolyte Prepared by Aerosol Deposition," Int. J. Hydrogen Energy, 37 6830-35 (2012). https://doi.org/10.1016/j.ijhydene.2012.01.055 - J.-J. Choi, J.-H. Choi, J. Ryu, B.-D. Hahn, J.-W. Kim, C.-W. Ahn, W.-H. Yoon, and D.-S. Park, "Microstructural Evolution of YSZ Electrolyte Deposited on Porous NiO-YSZ by Aerosol Deposition," J. Eur. Ceram. Soc., 32 3249-54 (2012). https://doi.org/10.1016/j.jeurceramsoc.2012.04.024
- J.-J. Choi, J. Ryu, B.-D. Hahn, C.-W. Ahn, J.-W. Kim, W.- H. Yoon, and D.-S. Park, "Low Temperature Preparation and Characterization of Solid Oxide Fuel Cells on FeCr- Based Alloy Support by Aerosol Deposition," Int. J. Hydrogen Energy, 39 [24] I2878-83 (2014).
- J.-J. Choi, D.-S. Park, B.-D. Hahn, J. Ryu, and W.-H. Yoon, "Oxidation Behavior of Ferritic Steel Alloy Coated with Highly Dense Conducting Ceramics by Aerosol Deposition," J. Am. Ceram. Soc., 91 [8] 2601-6 (2008). https://doi.org/10.1111/j.1551-2916.2008.02506.x
-
J.-J. Choi, D.-S. Park, B.-G. Seong, and H.-Y. Bae, "Lowtemperature Preparation of Dense
$(Gd,Ce)O_{2-{\delta}}-Gd_2O_3$ Composite Buffer Layer by Aerosol Deposition for YSZ Electrolyte- based SOFC," Int. J. Hydrogen Energy, 37 9809-15 (2012). https://doi.org/10.1016/j.ijhydene.2012.03.148
Cited by
- Improving the efficiency of layered perovskite cathodes by microstructural optimization vol.5, pp.17, 2017, https://doi.org/10.1039/C6TA10946B
- High-Temperature Electrical Insulation Behavior of Alumina Films Prepared at Room Temperature by Aerosol Deposition and Influence of Annealing Process and Powder Impurities vol.27, pp.5, 2018, https://doi.org/10.1007/s11666-018-0719-x
- In- and through-plane conductivity of 8YSZ films produced at room temperature by aerosol deposition vol.54, pp.21, 2015, https://doi.org/10.1007/s10853-019-03844-7