참고문헌
- B. C. H. Steele and A. Heinzel, "Materials for Fuel-cell Technologies," Nature, 414 [6861] 345-52 (2001). https://doi.org/10.1038/35104620
- E. D. Wachsman and K. T. Lee, "Lowering the Temperature of Solid Oxide Fuel Cells," Science, 334 [6058] 935-39 (2011). https://doi.org/10.1126/science.1204090
- S. C. Singhal, "Solid Oxide Fuel Cells : Designs, Materials, and Applications," J. Korean Ceram. Soc., 42 [12] 777-86 (2005). https://doi.org/10.4191/KCERS.2005.42.12.777
- R. J. Gorte, S. Park, J. M. Vohs, and C. Wang, "Anodes for Direct Oxidation of Dry Hydrocarbons in a Solid-oxide Fuel Cell," Adv. Mater., 12 [19] 1465-69 (2000). https://doi.org/10.1002/1521-4095(200010)12:19<1465::AID-ADMA1465>3.0.CO;2-9
- Z. Shao, S. M. Haile, J. Ahn, P. D. Ronney, Z. Zhan, and S. A. Barnett, "A Thermally Self-sustained Micro Solid-oxide Fuel-cell Stack with High Power Density," Nature, 435 [7043] 795-98 (2005). https://doi.org/10.1038/nature03673
- H. Yokokawa, T. Horita, K. Yamaji, H. Kishimoto, and M. E. Brito, "Degradation of SOFC Cell/Stack Performance in Relation to Materials Deterioration," J. Korean Ceram. Soc., 49 [1] 11-8 (2012). https://doi.org/10.4191/kcers.2012.49.1.011
- K. Park, S. Yu, J. Bae, H. Kim, and Y. Ko, "Fast Performance Degradation of SOFC Caused by Cathode Delamination in Long-term Testing," Int. J. Hydrogen Energ., 35 [16] 8670-77 (2010). https://doi.org/10.1016/j.ijhydene.2010.05.005
- Y.-S. Chou and J. W. Stevenson, "Thermal Cycling and Degradation Mechanisms of Compressive Mica-based Seals for Solid Oxide Fuel Cells," J. Power Sources, 112 [2] 376- 83 (2002). https://doi.org/10.1016/S0378-7753(02)00444-5
-
H.-S. Noh, J.-W. Son, H. Lee, H.-R. Kim, J.-H. Lee, and H.- W. Lee, "Thin Film
$(La_{0.7}Sr_{0.3})_{0.95}MnO_{3-{\delta}}$ Fabricated by Pulsed Laser Deposition and Its Application as a Solid Oxide Fuel Cell Cathode for Low-temperature Operation," J. Korean Ceram. Soc., 47 [1] 75-81 (2010). https://doi.org/10.4191/KCERS.2010.47.1.075 - H.-S. Noh, J.-W. Son, H. Lee, H.-S. Song, H.-W. Lee, and J.- H. Lee, "Low Temperature Performance Improvement of SOFC with Thin Film Electrolyte and Electrodes Fabricated by Pulsed Laser Deposition," J. Electrochem. Soc., 156 [12] B1484-90 (2009). https://doi.org/10.1149/1.3243859
- H.-S. Noh, J.-W. Son, H. Lee, H.-I. Ji, J.-H. Lee, and H.-W. Lee, "Suppression of Ni Agglomeration in PLD Fabricated Ni-YSZ Composite for Surface Modification of SOFC Anode," J. Eur. Ceram. Soc., 30 [16] 3415-23 (2010). https://doi.org/10.1016/j.jeurceramsoc.2010.07.035
- Y. J. Leng, S. H. Chan, K. A. Khor, and S. P. Jiang, "Performance Evaluation of Anode-supported Solid Oxide Fuel Cells with Thin Film YSZ Electrolyte," Int. J. Hydrogen Energ., 29 [10] 1025-33 (2004). https://doi.org/10.1016/j.ijhydene.2004.01.009
- A. Leonide, V. Sonn, A. Weber, and E. Ivers-Tiffee, "Evaluation and Modeling of the Cell Resistance in Anode-Supported Solid Oxide Fuel Cells," J. Electrochem. Soc., 155 [1] B36-41 (2008). https://doi.org/10.1149/1.2801372
- J. H. Shim, C. C. Chao, H. Huang, and F. B. Prinz, "Atomic Layer Deposition of Yttria-stabilized Zirconia for Solid Oxide Fuel Cells," Chem. Mater., 19 [15] 3850-54 (2007). https://doi.org/10.1021/cm070913t
- A. Evans, A. Bieberle-Hütter, J. L. M. Rupp, and L. J. Gauckler, "Review on Microfabricated Micro-solid Oxide Fuel Cell Membranes," J. Power Sources, 194 [1] 119-29 (2009). https://doi.org/10.1016/j.jpowsour.2009.03.048
- K. Bae, D. Y. Jang, H. J. Jung, J. W. Kim, J. W. Son, and J. H. Shim, "Micro Ceramic Fuel Cells with Multilayered Yttrium-doped Barium Cerate and Zirconate Thin Film Electrolytes," J. Power Sources, 248 1163-69 (2014). https://doi.org/10.1016/j.jpowsour.2013.10.057
- S. Primdahl and M. Mogensen, "Oxidation of Hydrogen on Ni/Yttria-Stabilized Zirconia Cermet Anodes," J. Electrochem. Soc., 144 [10] 3409-19 (1997). https://doi.org/10.1149/1.1838026
- H. Iwahara, "Proton Conducting Ceramics and Their Applications," Solid State Ionics, 86-8 9-15 (1996). https://doi.org/10.1016/0167-2738(96)00087-2
- H. G. Bohn and T. Schober, "Electrical Conductivity of the High-temperature Proton Conductor BaZr(0.9)Y(0.1)O(2.95)," J. Am. Ceram. Soc., 83 [4] 768-72 (2000). https://doi.org/10.1111/j.1151-2916.2000.tb01272.x
- K. D. Kreuer, "Proton-conducting Oxides," Annu. Rev. Mater. Res., 33 333-59 (2003). https://doi.org/10.1146/annurev.matsci.33.022802.091825
- S.-J. Song, E. D. Wachsman, S. E. Dorris, and U. Balachandran, "Defect Chemistry Modeling of High-temperature Proton- conducting Cerates," Solid State Ionics, 149 [1-2] 1-10 (2002). https://doi.org/10.1016/S0167-2738(02)00147-9
- T. Schober, W. Schilling, and H. Wenzl, "Defect Model of Proton Insertion into Oxides," Solid State Ionics, 86-88 Part 1 653-58 (1996). https://doi.org/10.1016/0167-2738(96)00230-5
- H. I. Ji, B. K. Kim, J. H. Yu, S. M. Choi, H. R. Kim, J. W. Son, H. W. Lee, and J. H. Lee, "Three Dimensional Representations of Partial Ionic and Electronic Conductivity Based on Defect Structure Analysis of BaZr0.85Y0.15O3- delta," Solid State Ionics, 203 [1] 9-17 (2011). https://doi.org/10.1016/j.ssi.2011.09.016
-
K. H. Ryu and S. M. Haile, "Chemical Stability and Proton Conductivity of Doped
$BaCeO_3-BaZrO_3$ Solid Solutions," Solid State Ionics, 125 [1-4] 355-67 (1999). https://doi.org/10.1016/S0167-2738(99)00196-4 -
S. Barison, M. Battagliarin, T. Cavallin, L. Doubova, M. Fabrizio, C. Mortalo, S. Boldrini, L. Malavasi, and R. Gerbasi, "High Conductivity and Chemical Stability of
$BaCe_{1-x-y}Zr_xY_yO_{3-{\delta}}$ Proton Conductors Prepared by a Sol-gel Method," J. Mater. Chem., 18 [42] 5120-28 (2008). https://doi.org/10.1039/b808344d - C. W. Kwon, J. W. Son, J. H. Lee, H. M. Kim, H. W. Lee, and K. B. Kim, "High-performance Micro-solid Oxide Fuel Cells Fabricated on Nanoporous Anodic Aluminum Oxide Templates," Adv. Funct. Mater., 21 [6] 1154-59 (2011). https://doi.org/10.1002/adfm.201002137
- A. Mukherjee, B. Maiti, A. Das Sharma, R. N. Basu, and H. S. Maiti, "Correlation between Slurry Rheology, Green Density and Sintered Density of Tape Cast Yttria Stabilised Zirconia," Ceram. Int., 27 [7] 731-39 (2001). https://doi.org/10.1016/S0272-8842(00)00121-8
- H. Moon, S. D. Kim, S. H. Hyun, and H. S. Kim, "Development of IT-SOFC Unit Cells with Anode-supported Thin Electrolytes via Tape Casting and Co-firing," Int. J. Hydrogen Energ., 33 [6] 1758-68 (2008). https://doi.org/10.1016/j.ijhydene.2007.12.062
- X. Huang and W. J. Brittain, "Synthesis and Characterization of PMMA Nanocomposites by Suspension and Emulsion Polymerization," Macromolecules, 34 [10] 3255-60 (2001). https://doi.org/10.1021/ma001670s
- P. Babilo, T. Uda, and S. M. Haile, "Processing of Yttriumdoped Barium Zirconate for High Proton Conductivity," J. Mater. Res., 22 [5] 1322-30 (2007). https://doi.org/10.1557/jmr.2007.0163
- P. Babilo and S. M. Haile, "Enhanced Sintering of Yttriumdoped Barium Zirconate by Addition of ZnO," J. Am. Ceram. Soc., 88 [9] 2362-68 (2005). https://doi.org/10.1111/j.1551-2916.2005.00449.x
- F. F. Lange, "Constrained Network Model for Predicting Densification Behavior of Composite Powders," J. Mater. Res., 2 [01] 59-65 (1987). https://doi.org/10.1557/JMR.1987.0059
- K. Bae, D. Y. Jang, H.-S. Noh, H. J. Kim, J. Hong, K. J. Yoon, B.-K. Kim, J.-W. Son, and J. H. Shim, "High-performance Protonic Ceramic Fuel Cells with Thin-film Yttriumdoped Barium Zirconate Electrolyte and Nickel Oxide- Yttrium-doped Barium Zirconate Interlayers," Adv. Energy Mater., submitted.
피인용 문헌
- High-performance thin-film protonic ceramic fuel cells fabricated on anode supports with a non-proton-conducting ceramic matrix vol.4, pp.17, 2016, https://doi.org/10.1039/C5TA10670B
- Processing Ceramic Proton Conductor Membranes for Use in Steam Electrolysis vol.10, pp.11, 2015, https://doi.org/10.3390/membranes10110339