한국광물학회지 (Journal of the Mineralogical Society of Korea)

  • 제28권3호
  • /
  • Pages.233-244
  • /
  • 2015
  • /
  • 1225-309X(pISSN)
  • /
  • 2288-7172(eISSN)
한국광물학회 (The Mineralogical Society of Korea)
권호 표지
DOI QR코드

DOI QR Code

마이크로웨이브 가열이 황철석의 상변환과 Fe 용출에 미치는 효과

The Effect of Microwave Heating on the Mineralogical Phase Transformation of Pyrite and Fe Leaching

  • 유돈상 (조선대학교 LINC사업단) ;
  • 박천영 (조선대학교 에너지.자원공학과)
  • You, Don-Sang (Dept. of Leaders in Industry-University Cooperation, Chosun University) ;
  • Park, Cheon-Young (Dept. of Energy and Resource Engineering, Chosun University)
  • 투고 : 2015.06.10
  • 심사 : 2015.09.11
  • 발행 : 2015.09.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

전기로와 마이크로웨이브에 노출시킨 황철석 시료에 대하여 광물학적 상변화를 파악하고 Fe 최대 용출 인자들을 결정하고자 하였다. 전기로에 노출시킨 시료에서 적철석으로 구성된 가장자리 구조가 나타난 반면에 마이크로웨이브에 노출시킨 시료는 적철석과 자류철석이 가장자리 구조로 나타났다. 특히 마이크로웨이브에 노출시킨 시료는 결정 내부에 아크방전에 의하여 수많은 크랙들이 서로 연결되어 형성되었지만 전기로에 노출시킨 시료는 크랙이 형성되지 않았다. XRD 분석에서, 전기로에 노출시킨 시료는 황철석과 적철석이 나타났지만 마이크로웨이브에 노출시킨 시료는 황철석, 적철석 및 자류철석이 나타났다. 황철석 시료에 대하여 암모니아 용출실험을 수행하여 Fe 용출률이 최대로 나타나는 인자들은 -325 mesh 입도, 2.0 M의 황산, 1.5 M의 황산암모늄, 1.0 M의 과산화수소 농도에서였다. 용출률이 최대로 나타나는 인자들을 전기로에 그리고 마이크로웨이브 노출 시료에 각각 적용한 결과 전기로 보다 마이크로웨이브에 노출시킨 시료에서 Fe 용출률이 더 많이 그리고 더 빠른 시간에 나타났다. 따라서 산업광물에 포함된 Fe 제거에 혹은 금을 함유하는 황철석 분해에 마이크로웨이브 가열이 효과적일 것으로 사료된다.

In order to study the phase transformation of pyrite and to determine the maximum Fe leaching factors, pyrite samples were an electric furnace and microwave oven and then ammonia leaching was carried out. The rim structure of hematite was observed in the sample exposed in an electric furnace, whereas a rim structure consisting of hematite and pyrrhotite were found in the microwave treated sample. Numerous interconnected cracks were only formed in the microwave treated sample due to the arcing effect, and these cracks were not found in the electric furnace treated sample. Under XRD analysis, pyrite and hematite were observed in the electric furnace treated sample, whereas pyrite, hematite and pyrrhotite were found in the microwave treated sample. The results of the pyrite sample leaching experiments showed that the Fe leaching was maximized with the particle size of -325 mesh, sulfuric acid of 2.0 M, ammonium sulfate of 1.0 M, and hydrogen peroxide of 1.0 M. The electric furnace and microwave treated samples were tested under the maximum leaching conditions, the Fe leaching rate was much greater in the microwave treated sample than in the electric furnace treated sample and the maximum Fe leaching time was also faster in the microwave treated sample than in the electric furnace treated sample. Accordingly, it is expected that the microwave heating can enhance (or improve) Fe leaching in industrial minerals as well as pyrite decomposition in gold ores.

키워드

참고문헌

  1. Al-Harahsheh, M. and Kingman, S.W. (2004) Microwaveassisted leaching-a review. Hydrometallurgy, 73, 189-203. https://doi.org/10.1016/j.hydromet.2003.10.006
  2. Allan, G.C. and Woodcock, J.T. (2001) A review of the flotation of native gold and electrum. Minerals Engineering, 14, 931-962. https://doi.org/10.1016/S0892-6875(01)00103-0
  3. Amankwah, R.K. and Ofpri-Sarpong, G. (2011) Microwave heating of gold ores for enhanced grindability and cyanide amenability. Minerals Engineering, 24, 541-544. https://doi.org/10.1016/j.mineng.2010.12.002
  4. Amankwah, R.K. and Pickles, C.A. (2009) Microwave roasting of a carbonaceous sulphidic gold concentrate. Minerals Engineering, 22, 1095-1101. https://doi.org/10.1016/j.mineng.2009.02.012
  5. Amankwah, R.K., Khan, A.U., Pickles, C.A., and Yen, W.T. (2005) Improved grindability and gold liberation by microwave pretreatment of a free-milling gold ore. Mineral Processing and Extractive Metallurgy(Transaction of the Institute of Minerals and Metallury C), 114, 30-36. https://doi.org/10.1179/037195505X28447
  6. Antonijevic, M.M, Dimitrijevic, M., and Jankovic, Z. (1997) Leaching of pyrite with hydrogen peroxide sulphuric acid. Hydrometallurgy, 46, 71-83. https://doi.org/10.1016/S0304-386X(96)00096-5
  7. Barani, K., Javad Koleini, S.M., and Rezaei, B. (2011) Magnetic properties of an iron ore sample after microwave heating. Separation and Purification Technology, 76, 331-336. https://doi.org/10.1016/j.seppur.2010.11.001
  8. Beckstead, L.W. and Miller, J.D. (1977) Ammonia, oxidation leaching of chalcopyrite-reaction kinetics. Metallurgical Transactions B, 8B, 19-29.
  9. Boyabat, N., Ozer, A.K., Bayrakceken, S., and Gulaboglu, M.S. (2003) Thermal decomposition of pyrite in the nitrogen atmosphere. Fuel Processing Technology, 85, 179-188.
  10. Chen, G., Chen, J., Guo, S., Li, J., and Srinivasakanan, C. (2012) Dissociation behavior and structural of ilmenite ore by microwave irradiation. Applied Surface Science, 258, 4826-4829. https://doi.org/10.1016/j.apsusc.2011.12.121
  11. Das, R.P. and Anand, S. (1995) Precipitation of iron oxides from ammonia-ammonium sulphate solutions. Hydrometallurgy, 38, 161-173. https://doi.org/10.1016/0304-386X(94)00052-5
  12. Dunn, J.G. and Chamberlain, A.C. (1997) The recovery of gold from refractory arsenopyrite concentrates by pyrolysis-oxidation. Minerals Engineering, 10, 919-928. https://doi.org/10.1016/S0892-6875(97)00074-5
  13. Ghosh, M.K., Das, R.P., and Biswas, A.K. (2002) Oxidative ammonia leaching of sphalerite part Ⅰ: noncatalytic kinetics. International Journal of Mineral Processing, 66, 241-254. https://doi.org/10.1016/S0301-7516(02)00068-6
  14. Han, O., Kim, B.J., Cho, K.H., Choi, N.C., and Park, C.Y. (2014) Selective Phase Transformation of Arsenopyrite by Microwave Heating and their Enhancement Au Recovery by Thiocyanate Solution. Journal of Mineralogical Society of Korea, 27, 73-83 (in Korea with English abstract). https://doi.org/10.9727/jmsk.2014.27.2.73
  15. Haque, K.E. (1999) Microwave energy for mineral treatment processes-a brief review. International Journal of Mineral Processing, 57, 1-24. https://doi.org/10.1016/S0301-7516(99)00009-5
  16. Hu, G., Dam-Johansen, K., Wedel, S., and Hansen, J.P. (2006) Decomposition and oxidation of pyrite. Progress in Energy and Combusion Science, 32, 295-314. https://doi.org/10.1016/j.pecs.2005.11.004
  17. Huang, J.H. and Rowson, N.A. (2002) Hydrometallurgical decomposition of pyrite and marcasite in a microwave field. Hydrometallurgy, 64, 169-179. https://doi.org/10.1016/S0304-386X(02)00041-5
  18. Jones, D.A., Lelyveld, T.P., Mavrofidis, S.D., and Kingman, S.W. (2002) Microwave heating applications in environmental engineering-a review. Resources, Conservation and Recycling, 34, 75-90. https://doi.org/10.1016/S0921-3449(01)00088-X
  19. Kim, B.J., Cho, K.H., Choi, N.C., and Park, C.Y. (2013) The Geochemical Interpretation of Phase Transform and Fe-leaching Efficiency for Pyrite by Microwave Energy and Ammonia Solution. Journal of Mineralogical Society of Korea, 26, 139-150 (in Korea with English abstract). https://doi.org/10.9727/jmsk.2013.26.3.139
  20. La Brooy, S.R., Linge, H.G., and Walker, G.S. (1994) Review of gold extraction from ores. Minerals Engineering, 7, 1213-1241. https://doi.org/10.1016/0892-6875(94)90114-7
  21. Ma, S.J., Luo, W.J., Mo, W., Su, X.J., Liu, P., and Yang, J.L. (2010) Removal of arsenic and sulfur from a refractory gold concentrate by microwave heating. Minerals Engineering, 23, 61-63. https://doi.org/10.1016/j.mineng.2009.09.018
  22. Music, S., Popovic, S., and Ristic, M. (1992) Thermal decomposition of pyrite. Journal of Radioanalytical and Nuclear Chemistry, 162, 217-226. https://doi.org/10.1007/BF02035382
  23. Olubambi, P.A., Potgieter, J.H., Hwang, J.Y., and Ndlovu, S. (2007) Influence of microwave heating on the processing and dissolution behaviour of low-grade complex sulphide ores. Hydrometallurgy, 89, 127-135. https://doi.org/10.1016/j.hydromet.2007.07.010
  24. Omran, M., Fabritius T., Elmahdy, A., Abdel-Khalek, N.A., El-Aref, M., and El-Hamis Elmanawi. (2014) Effect of microwave pre-treatment on the magnetic properties of iron ore and its implications on magnetic separation. Separation and Purification Technology, 136, 223-232. https://doi.org/10.1016/j.seppur.2014.09.011
  25. Pickles, C.A. (2009a) Microwaves in extractive metallurgy: part 1-review of fundamentals. Minerals Engineering, 22, 1102-1111. https://doi.org/10.1016/j.mineng.2009.02.015
  26. Pickles, C.A. (2009b) Microwave in extractive metallurgy: part2-a review of applications. Minerals Engineering, 22, 1112-1118. https://doi.org/10.1016/j.mineng.2009.02.014
  27. Prasad, M.S., Mensah-Biney, R., and Pizarro, R.S. (1991) Modern trends in gold processing-overview. Minerals Engineering, 4, 1257-1277. https://doi.org/10.1016/0892-6875(91)90171-Q
  28. Rao, K.S. and Ray, H.S. (1998) A new look at characterisation and oxidative ammonia leaching behaviour of multimetal sulphides. Minerals Engineering, 11, 1011-1024. https://doi.org/10.1016/S0892-6875(98)00089-2
  29. Ubaldini, S., Piga, L., Fornari, P., and Massidda, R. (1996) Removal of iron from quartz sand: a study by column leaching using a complete factorial drsign. Hydrometallurgy, 40, 369-379. https://doi.org/10.1016/0304-386X(95)00012-6
  30. Uslu, T., Atalay, U., and Atol, A.I. (2003) Effect of microwave heating on magnetic separation of pyrite. Colloids and Surface, 225, 161-167. https://doi.org/10.1016/S0927-7757(03)00362-5
  31. Waters, K.E., Rowson, N.A., Greenwood, R.W., and Williams, A.J. (2007) Characterising the effect of microwave radiation on the magnetic properties of pyrite. Separation and Purification Technology, 56, 9-17. https://doi.org/10.1016/j.seppur.2007.01.011
  32. Znamenackova, I., Lovas, M., Mockovciakova, A., Jakabsky, S., and Briancin, J. (2005) Modification of magnetic properties of siderite ore by microwave energy. Separation and Purification Technology, 43, 169-174. https://doi.org/10.1016/j.seppur.2004.11.002

피인용 문헌

  1. Observability of Invisible Gold using BSE Imagery and Gold Recovery by Microwave-Nitric Acid Leaching vol.57, pp.1, 2015, https://doi.org/10.32390/ksmer.2020.57.1.001