DOI QR코드

DOI QR Code

A methodology for design of metallic dampers in retrofit of earthquake-damaged frame

  • Zhang, Chao (Postdoctoral Research Station of Civil Engineering, Guangzhou University) ;
  • Zhou, Yun (College of Civil Engineering, Guangzhou University) ;
  • Weng, Da G. (State Key Laboratory for Disaster Reduction in Civil Engineering, Tongji University) ;
  • Lu, De H. (College of Civil Engineering, Guangzhou University) ;
  • Wu, Cong X. (College of Civil Engineering, Guangzhou University)
  • 투고 : 2014.06.13
  • 심사 : 2015.11.03
  • 발행 : 2015.11.25

초록

A comprehensive methodology is proposed for design of metallic dampers in seismic retrofit of earthquake-damaged frame structures. It is assumed that the metallic dampers remain elastic and only provide stiffness during frequent earthquake (i.e., earthquake with a 63% probability of exceedance in 50-year service period), while in precautionary earthquake (i.e., earthquake with a 10% probability of exceedance in 50-year service period), the metallic dampers yield before the main frame and dissipate most of the seismic energy to either prevent or minimize structural damages. Therefore by converting multi-story frame to an equivalent single-degree-of-freedom system, the added stiffness provided by metallic dampers is designed to control elastic story drifts within code-based demand under frequent earthquake, and the added damping with the combination of added stiffness influences is obtained to control structural stress within performance-based target under precautionary earthquake. With the equivalent added damping ratio, the expected damping forces provided by metallic dampers can be calculated to carry out the configuration and design of metallic dampers along with supporting braces. Based on a detailed example for retrofit of an earthquake-damaged reinforced concrete frame by using metallic dampers, the proposed design procedure is demonstrated to be simple and practical, which can not only meet current China's design codes but also be used in retrofit design of earthquake-damaged frame with metallic damper for reaching desirable performance objective.

키워드

과제정보

연구 과제 주관 기관 : National Natural Science Foundation of China, Guangzhou Postdoctoral Scientific Research Foundation

참고문헌

  1. ASCE 7-05 Seismic Provisions, (2005), Section 18: Seismic Design Requirements for Structures with Damping Systems, prepared by the American Society of Civil Engineers for the Federal Emergency Management Agency, Washington, D.C.
  2. Benavent-Climent, A. (2011), "An energy-based method for seismic retrofit of existing frames using hysteretic dampers", Soil Dyn. Earthq. Eng., 31(10), 1385-1396. https://doi.org/10.1016/j.soildyn.2011.05.015
  3. Choi, H. and Kim, J. (2006), "Energy-based seismic design of buckling-restrained braced frames using hysteretic energy spectrum", Eng. Struct., 28(2), 304-311. https://doi.org/10.1016/j.engstruct.2005.08.008
  4. Clough, R.W. and Penzien, J. (1993), Dynamics of Structures (second ed.), McGraw Hill Inc., New York.
  5. Curadelli, R.O. and Riera, J.D. (2004), "Reliability based assessment of the effectiveness of metallic dampers in buildings under seismic excitations", Eng. Struct., 26(13), 1931-1938. https://doi.org/10.1016/j.engstruct.2004.07.004
  6. Dargush, G.F. and Soong, T.T. (1995), "Behavior of metallic plate dampers in seismic passive energy dissipation systems", Earthq. Spectra, 11(4), 545-568. https://doi.org/10.1193/1.1585827
  7. Gao, X.Y., Zhang, T.L., Huang, H.T., Wang, X. and Ren, J. (2010), "The design method for improving the aseismatic performance of concentrically braced steel frames with buckling-restrained brace", J. Beijing Univ. Technol., 36(9), 1206-1214.
  8. FEMA-356 (2000), Prestandard and Commentary for the Seismic Rehabilitation of Buildings, The American Society for Civil Engineers (ASCE) for the Federal Emergency Management Agency, Washington, D.C.
  9. Habibi, A., Chan, R.W. and Albermani, F. (2013), "Energy-based design method for seismic retrofitting with passive energy dissipation systems", Eng. Struct., 46, 77-86. https://doi.org/10.1016/j.engstruct.2012.07.011
  10. Jensen, H.A. and Sepulveda, J.G. (2012), "On the reliability-based design of structures including passive energy dissipation systems", Struct. Saf., 34(1), 390-400. https://doi.org/10.1016/j.strusafe.2011.09.005
  11. JSSI Manual (2003, 2005, 2007), Design and Construction Manual for Passively Controlled Buildings, Japan Society of Seismic Isolation, Tokyo, Japan, 1st Ed. 405pages, 2nd Ed. 515 pages, 2nd Ed & 2nd Print 509 pages.
  12. Kasai, K. and Kibayashi, M. (2004), "JSSI manual for building passive control technology: Part-1 manual contents and design/analysis methods", Proceedings of the 13th World Conference on Earthquake Engineering, Vancouver, Canada, August.
  13. Kelly, J.M., Skinner, R.I. and Heine, A.J. (1972), "Mechanisms of energy absorption in special devices for use in earthquake resistant structures", Bull. NZ Nat. Soc. Earthq. Eng., New Zealand Society for Earthquake Engineering, 5(3), 63-88.
  14. Kim, J. and Seo, Y. (2003), "Seismic design of steel structures with buckling-restrained knee braces", J. Constr. Steel Res., 59(12), 1477-1497. https://doi.org/10.1016/S0143-974X(03)00100-7
  15. Li, B. and Liang, X.W. (2007), "Design of supplemental viscous dampers in inelastic SDOF system based on improved capacity spectrum method", Struct. Eng. Mech., 27(5), 541-554. https://doi.org/10.12989/sem.2007.27.5.541
  16. Li, G. and Li, H.N. (2007), "Direct displacement-based design for buildings with passive energy dissipation devices", Eng. Mech., 24(9), 88-94.
  17. Li, H.N. and Li, G. (2007), "Experimental study of structure with "dual function" metallic dampers", Eng. Struct., 29(8), 1917-1928. https://doi.org/10.1016/j.engstruct.2006.10.007
  18. Lin, Y.Y., Tsai, M.H., Hwang, J.S. and Chang, K.C. (2003), "Direct displacement-based design for building with passive energy dissipation systems", Eng. Struct., 25(1), 25-37. https://doi.org/10.1016/S0141-0296(02)00099-8
  19. Lomiento, G., Bonessio, N. and Braga, F. (2010), "Design criteria for added dampers and supporting braces", Seis. Isolat. Protect. Syst., 1(1), 55-73. https://doi.org/10.2140/siaps.2010.1.55
  20. Ou, J.P. and Wu, B. (1997), "A new energy dissipation device composite steel plate energy dissipater", Earthq. Eng. Eng. Vib., 17(1), 33-40.
  21. Parulekar, Y.M., Reddy, G.R., Vaze, K.K., Ghosh, A.K., Kushwaha, H.S. and Ramesh Babu, R. (2009), "Seismic response analysis of RCC structure with yielding dampers using linearization techniques", Nucl. Eng. Des., 239(12), 3054-3061. https://doi.org/10.1016/j.nucengdes.2009.08.016
  22. PRC National Standard (2010), Code for Design of Concrete Structures (GB 50010-2010), The Ministry of Housing and Urban-Rural Construction of the People's Republic of China, China Architecture & Building Press, Beijing, China.
  23. PRC National Standard (2010), Code for Seismic Design of Buildings (GB 50011-2010), The Ministry of Housing and Urban-Rural Construction of the People's Republic of China, China Architecture & Building Press, Beijing, China.
  24. PRC Profession Standard (2013), Technical Specification for Building with Energy Dissipation Devices (JGJ 297-2013), issued by the Ministry of Housing and Urban-Rural Construction of the People's Republic of China, Beijing, China.
  25. Skinner, R.I., Kelly, J.M. and Heine, A.J. (1975), "Hysteresis dampers for earthquake-resistant structures", Earthq. Eng. Struct. Dyn., 3(3), 287-296. https://doi.org/10.1002/eqe.4290030307
  26. Soong, T.T. and Dargush, G.F. (1997), Passive Energy Dissipation Systems in Structural Engineering, John Wiley and Sons, Ltd., New York.
  27. Tsai, K.C., Chen, H.W., Hong, C.P. and Su, Y.F. (1993), "Design of steel triangular plate energy absorbers for seismic-resistant construction", Earthq. Spectra, 9(3), 505-528. https://doi.org/10.1193/1.1585727
  28. Tsai, C.S. and Tsai, K.C. (1995), "TPEA device as seismic damper for high-rise buildings", J. Eng. Mech., 121(10), 1075-1081. https://doi.org/10.1061/(ASCE)0733-9399(1995)121:10(1075)
  29. Tyler, R.G. (1983), "Preliminary test on an energy absorbing element for braced structures under earthquake loading", Bull. NZ Nat. Soc. Earthq. Eng., New Zealand Society for Earthquake Engineering, 16(3), 201-212.
  30. Wada, A., Huang, Y.H. and Iwata, M. (2000), "Passive damping technology for buildings in Japan", Prog. Struct. Eng. Mater., 2(3), 335-350. https://doi.org/10.1002/1528-2716(200007/09)2:3<335::AID-PSE40>3.0.CO;2-A
  31. Weng, D.G. and Lu, X.L. (2004), "Study on design parameters of energy dissipation structures with experiment verification", J. Earthq. Eng. Eng. Vib., 24(2), 150-157.
  32. Weng, D.G., Zhang, C., Lu, X.L., Zeng, S. and Zhang, S.M. (2012), "A simplified design procedure for seismic retrofit of earthquake-damaged RC frames with viscous dampers", Struct. Eng. Mech., 44(5), 611-631. https://doi.org/10.12989/sem.2012.44.5.611
  33. Whittaker, A.S., Bertero, V.V., Thompson, C.L. and Alonso, L.J. (1991), "Seismic testing of steel plate energy dissipation devices", Earthq. Spectra, 7(4), 563-604. https://doi.org/10.1193/1.1585644
  34. Zhang, C., Weng, D.G., Lv, X.L., Peng, L.H., Zhang, S.M., Zhou, H.W. and Ding, S.W. (2012), "A study on energy dissipation technology applied to C-category frame of school building strengthening for improving one grade of fortification intensity", J. Disast. Prev. Mitig. Eng., 32(4), 408-416.
  35. Zhang, S.H., Liang, X.W. and Deng, M.K. (2006), "A study on the capacity-spectrum seismic design method for buildings equipped with passive energy dissipation systems", Chin. Civil Eng. J., 39(7), 26-32.
  36. Zhou, Y. and Liu, J. (1998), "Development and study of new energy dissipaters (dampers)", Earthq. Eng. Eng. Vib., 18(1), 71-79.

피인용 문헌

  1. Simple design method of structure with metallic yielding dampers based on elastic–plastic response reduction curve vol.150, 2017, https://doi.org/10.1016/j.engstruct.2017.07.047
  2. The effects of special metallic dampers on the seismic behavior of a vulnerable RC frame vol.61, pp.4, 2015, https://doi.org/10.12989/sem.2017.61.4.483
  3. Retrofitting of a weaker building by coupling it to an adjacent stronger building using MR dampers vol.62, pp.2, 2015, https://doi.org/10.12989/sem.2017.62.2.197
  4. Parametric study of pendulum type dynamic vibration absorber for controlling vibration of a two DOF structure vol.13, pp.1, 2015, https://doi.org/10.12989/eas.2017.13.1.051
  5. Influence of neck width on the performance of ADAS device with diamond-shaped hole plates vol.74, pp.1, 2020, https://doi.org/10.12989/sem.2020.74.1.019
  6. Experimental and numerical investigation on seismic performance of retrofitted RC frame with sector lead viscoelastic damper vol.44, pp.None, 2015, https://doi.org/10.1016/j.jobe.2021.103218