References
- Walker SG (2001). Seismic performance of existing reinforced concrete beam-column joints. M.S. thesis, Department of Civil and Environmental Engineering, University of Washington, Seattle, WA, 2001.
- Meinheit DF, Jirsa JO (1981). Shear strength of RC beamcolumn connections. Journal of the Structural Division, 107(ST11), 2227-2244.
- Pantelides CP, Hansen J, Nadauld J, Reaveley LD. Assessment of reinforced concrete building exterior joints with substandard details. Pacific Earthquake Engineering Center, University of California, Berkeley, CA, PEER Report 2002/18, 2002.
- Park R, Ruitong D (1988). A comparison of the behavior of reinforced concrete beam-column joints designed for ductility and limited ductility. Bulletin of the New Zealand National Society of Earthquake Engineering, 21(4), 255-278.
- Durrani AJ, Wight JK (1985). Behavior of interior beam-to-column connections under earthquake-type loading. ACI Journal, 82(3), 343-349.
- Hall J, ed. Northridge earthquake of January 17, 1994 recon- naissance report Vol 1 Oakland: Earthquake Engineering Research Institute, 1996.
- Holmes W, Somers P, eds. Northridge earthquake of January 17, 1994 reconnaissance report Vol 2. Oakland: Earthquake Engineering Research Institute, 1996.
- Pantazopoulou SJ, Bonacci JF (1994). On earthquake resistant reinforced concrete frame connections. Canadian Journal of Civil Engineering, 21(2), 307-328. https://doi.org/10.1139/l94-032
- Mitra. An analytical study of reinforced concrete beam-column joint behavior under seismic loading. PhD Dissertation. University of Washington, Seattle; 2007.
- Baglin PS, Scott RH (2000). Finite element modeling of reinforced concrete beam-column connections. ACI Structural Journal, 97(6), 886-894.
- Lowes LN, Altoontash A (2003). Modeling reinforced concrete beam-column joints subjected to cyclic loading. Journal of Structural Engineering, 129(12), 1686-1697. https://doi.org/10.1061/(ASCE)0733-9445(2003)129:12(1686)
- Mitra N, Lowes LN (2007). Evaluation, calibration, and verification of a reinforced concrete beam-column joint model. Journal of Structural Engineering, 133 (1), 105-120. https://doi.org/10.1061/(ASCE)0733-9445(2007)133:1(105)
- Tajiri S, Shiohara H, Kusuhara F (2006). A new macroelement of reinforced concrete beam-column joint for elasto-plastic plane frame analysis. Proceedings of the 8th U.S. National Conference on Earthquake Engineering, San Francisco, California.
- Otani S (1974). Inelastic analysis of reinforced-concrete frame structures. Journal of the Structural Division, 100(ST7), 1422-1449.
- Anderson JC, Townsend WH (1977). Models for reinforced concrete frames with degrading stiffness. Journal of the Structural Division, 103(ST12), 1433-1449.
- Shin M, LaFave JM (2004). Modeling of cyclic joint shear deformation contributions in RC beam-column connections to overall frame behavior. Structural Engineering and Mechanics, 18(5), 645-669. https://doi.org/10.12989/sem.2004.18.5.645
- Jeon J-S. Aftershock Vulnerability Assessment of Damaged Reinforced Concrete Buildings in California. PhD thesis, Georgia Institute of Technology, 2013.
- Jeon J-S, Lowes LN, DesRoches R (2014). Numerical models for beam-column joints in reinforced concrete building frames. ACI Special Publication, 297, 3.1-3.26.
- Kim J, LaFave JM. Joint shear behavior of reinforced concrete beam column connections subjected to seismic lateral loading. Department of Civil and Environmental Engineering, University of Illinois at Urbana-Champaign, IL, Report No. NSEL-020, 2009.
- Birely A, Lowes LN, Lehman DE (2012). A model for the practical nonlinear analysis of reinforced concrete frames including joint flexibility. Engineering Structures, 34, 455-465. https://doi.org/10.1016/j.engstruct.2011.09.003
- McKenna F, Scott MH, Fenves GL (2010). Nonlinear finite-element analysis software architecture using object composition. ASCE Journal of Computing in Civil Engineering, 24(1), 95-107. https://doi.org/10.1061/(ASCE)CP.1943-5487.0000002
- Jeon J-S, Lowes LN, DesRoches R, Brilakis I (2015). Fragility curves for non-ductile reinforced concrete frames that exhibit different component response mechanisms. Engineering Structures, 85, 127-143. https://doi.org/10.1016/j.engstruct.2014.12.009
- Berry MP, Lehman DE, Lowes LN (2008). Lumped- plasticity model for performance simulation of bridge columns. ACI Structural Journal, 105(3), 270-279.
- Mander JB, Priestley MJN, Park R (1988). Theoretical stress-strain model for confined concrete. ASCE J Structural Engineering, 114(8), 1804-1826. https://doi.org/10.1061/(ASCE)0733-9445(1988)114:8(1804)
- ACI Committee 318. Building code requirements for reinforced concrete (ACI 318-11) and commentary. Farmington Hills, MI, American Concrete Institute, 2011.
- Elwood KJ, Matamoros AB, Wallace JW, Lehman D, Heintz JA, Mitchell AD, Moore MA, Valley MT, Lowes LN, Comartin CD, Moehle JP (2007). Update to ASCE/SEI 41 concrete provisions. Earthquake Spectra, 23(3), 493-523. https://doi.org/10.1193/1.2757714
- Anderson M, Lehman D, Stanton J (2008). A cyclic shear stress-strain model for joints without transverse reinforcement. Engineering Structures, 30(4), 941-954. https://doi.org/10.1016/j.engstruct.2007.02.005
- Joint ACI-ASCE Committee 352. Recommendations for design of beam-column connections in monolithic reinforced concrete structures (ACI 352R-02). Farmington Hills, MI, American Concrete Institute, 2002.
- Jeon J-S, Shafieezadeh A, DesRoches R (2014). Statistical models for shear strength of RC beam-column joints using machine-learning techniques. Earthquake Engineering and Structural Dynamics, 43(14), 2075-2095. https://doi.org/10.1002/eqe.2437
- Celik OC, Ellingwood BR (2010). Seismic fragilities for non-ductile reinforced concrete frames-Role of aleatoric and epistemic uncertainties. Structural Safety, 32(1), 1-12. https://doi.org/10.1016/j.strusafe.2009.04.003
- Jeon J-S, DesRoches R, Lowes LN, Brilakis I (2015). Framework for aftershock fragility assessment-Case studies: Older California reinforced concrete building frames. Earthquake Engineering and Structural Dynamics, in press.