Computational Structural Engineering (전산구조공학)

Computational Structural Engineering Institute of Korea (한국전산구조공학회)
권호 표지

Shape Control of Bi-Stable Composite with Cylinder Shape Tool-Plate

원통형 형판을 이용한 쌍안정 복합재의 형상 조정

  • 류정현 (한국원자력연구원 연구로장치설계부) ;
  • 이종구 (서울대학교 기계항공공학부) ;
  • 조맹효 (서울대학교 기계항공공학부)
  • Published : 2015.09.01
Download PDF
⟨ Previous Next ⟩

Abstract

Keywords

References

  1. Ryu J, Kong J-P, Kim S-W, Koh J-S, Cho K-J, Cho M. Curvature tailoring of unsymmetric laminates with an initial curvature. J Compos Mater. 2012.
  2. Ryu J, Lee J-G, Kim S-W, Koh J-s, Cho K-J, Cho M, Generalized curvature tailoring of bistable CFRP laminates by curing on a culinderical tool-plate with misalignment, Compos Sci Technol. 2014; 103: 127-133 https://doi.org/10.1016/j.compscitech.2014.08.024
  3. Hyer MW. Calculations of the Room-Temperature Shapes of Unsymmetric Laminates. J Compos Mater. 1981; 15(Jul): 296-310. https://doi.org/10.1177/002199838101500401
  4. Hyer MW. Some observations on the cured shape of thin unsymmetric laminates : Hyer, M.W. Journal of Composite Materials Vol 15 (March 1981) pp 175-194. J Compos Mater. 1981; 15(2): 175-194. https://doi.org/10.1177/002199838101500207
  5. Hyer MW. The room-temperature shapes of four-layer unsymmetric cross-ply laminates. J Compos Mater. 1982; 16(4): 318. https://doi.org/10.1177/002199838201600406
  6. Jun WJ, Hong CS. Effect of Residual Shear Strain on the Cured Shape of Unsymmetric Cross-Ply Thin Laminates. Compos Sci Technol. 1990;38(1):55-67. https://doi.org/10.1016/0266-3538(90)90071-C
  7. Jun WJ, Hong CS. Cured Shape of Unsymmetric Laminates with Arbitrary Lay-up Angles. J Reinf Plast Comp. 1992; 11(12): 1352-1366. https://doi.org/10.1177/073168449201101202
  8. Dano ML, Hyer MW. Thermally-induced deformation behavior of unsymmetric laminates. Int J Solids Struct. 1998; 35(17): 2101-2120. https://doi.org/10.1016/S0020-7683(97)00167-4
  9. Dano ML, Hyer MW. The response of unsymmetric laminates to simple applied forces. MECHANICS OF COMPOSITE MATERIALS AND STRUCTURES An INTERNATIONAL JOURNAL. 1996; 3(1): 65-80. https://doi.org/10.1080/10759419608945854
  10. Dano ML, Hyer MW. Snap-through of unsymmetric fiber-reinforced composite laminates. Int J Solids Struct. 2002; 39(1): 175-198. https://doi.org/10.1016/S0020-7683(01)00074-9
  11. Cho M, Kim MH, Choi HS, Chung CH, Ahn KJ, Eom YS. A study on the room-temperature curvature shapes of unsymmetric laminates including slippage effects. J Compos Mater. 1998; 32(5): 460-482. https://doi.org/10.1177/002199839803200503
  12. Cho M, Roh HY. Non-linear analysis of the curved shapes of unsymmetric laminates accounting for slippage effects. Compos Sci Technol. 2003; 63(15): 2265-2275. https://doi.org/10.1016/S0266-3538(03)00177-5
  13. Ren L, Parvizi-Majidi A, Li Z. Cured shape of cross-ply composite thin shells. J Compos Mater. 2003; 37(20): 1801. https://doi.org/10.1177/002199803035184
  14. Lee J-G, Ryu J, Kim S-W, Koh J-s, Cho K-J, Cho M, Effect of Initial Tool-plate Curvature on Snap-through Load of Unsymmetric Laminated Cross-ply Bistable Composites, Composite Structures. 2015; 122: 82-91 https://doi.org/10.1016/j.compstruct.2014.11.037
  15. Kim S-W, Koh J-s, Lee J-G, Ryu J, Cho M, Cho K-J. Flytrap-inspired robot using structurally integrated actuation based on bistability and developable surface. Bioinspiration and Biomimetics. 2014.
  16. Lee J-G, Ryu J, Lee H, Cho M, "Saddle-shaped Bi-stable Morphing Panel with Shape Memory Alloy Spring Actuator", Smart Materials and Structures. 2014; 23(7): 074013. https://doi.org/10.1088/0964-1726/23/7/074013