DOI QR코드

DOI QR Code

Behavior of wall panels in industrial buildings caused by differential settlements

  • Fernandez, Suyai (Intertechne Consultores y Asociados) ;
  • Jaca, Rossana C. (Civil Engineering Department, National University of Comahue) ;
  • Godoy, Luis A. (Institute for Advanced Studies in Engineering and Technology, IDIT CONICET-UNC, and FCEFyN, Universidad Nacional de Cordoba)
  • 투고 : 2014.02.25
  • 심사 : 2015.10.28
  • 발행 : 2015.11.10

초록

This paper presents the analysis of mechanical behavior of metal wall panels of storehouses and industrial buildings subjected to differential settlements. The storehouses considered are representative of those used in the agricultural activity. A small-scale model was built and tested in order to have evidence of the behavior and to validate computational models. The numerical investigation is carried out through finite element analysis using a general-purpose software, by modeling buildings with different geometries and evaluating different settlements of the ground. To obtain an adequate model, geometric non-linearity has to be taken into account. Models that represent the most usual geometric typologies were investigated under support settlements. The deflected shape of the wall panel and the relationship between the horizontal displacements and the settlement of the foundations are evaluated. The results show that there are large out-of-plane displacements caused by settlements that would be admitted by design recommendations.

키워드

과제정보

연구 과제 주관 기관 : Universidad Nacional del Comahue, Universidad Nacional de Cordoba, CONICET

참고문헌

  1. ABAQUS (2006), ABAQUS User's Manuals Version 6.3, Hibbitt, Karlsson and Sorensen, Inc. Rhode Island, USA.
  2. Agrawal, R. and Hora, M.S. (2010), "Effect of differential settlements on nonlinear interaction behaviour of plane frame-soil system", ARPN J. Eng. Appl. Sci., 5(7), 75-87.
  3. Agrawal, R. and Hora, M.S. (2012), "Nonlinear interaction behaviour of plane frame-layered soil system subjected to seismic loading", Struct. Eng. Mech., 41(6), 711-734. https://doi.org/10.12989/sem.2012.41.6.711
  4. AISC (2004), Serviceality Design Considerations for Steel Buildings, American Institute of Steel Construction, USA.
  5. Anastasopoulos, I. (2013), "Building damage during nearby construction: Forensic analysis", Eng. Fail. Anal., 34, 252-267. https://doi.org/10.1016/j.engfailanal.2013.08.003
  6. Arapakou, A.E. and Papadopoulos, V.P. (2012), "Factors affecting differential settlements of framed structures", Geotech. Geol. Eng., 30(6), 1323-1333. https://doi.org/10.1007/s10706-012-9546-x
  7. ASCE (2002), Minimum Design Loads for Buildings and Other Structures, American Society of Civil Engineers, USA.
  8. ASTM D882-02 (2002), Standard Test Method for Tensile Properties of Thin Plastic Sheeting, American Section of the International Association for Testing Materials, USA.
  9. Cao, Q.S. and Zhao, Y. (2010), "Buckling strength of cylindrical steel tanks under harmonic settlement", Thin Wall. Struct., 48(6), 391-400. https://doi.org/10.1016/j.tws.2010.01.011
  10. CIRSOC 301 (2000), Reglamento Argentino de Estructuras de Acero para Edificios, Centro de Investigacion de los Reglamentos Nacionales de Seguridad para Obras Civiles, Buenos Aires.
  11. CIRSOC 303 (1991), Estructuras Livianas de Acero, Centro de Investigacion de los Reglamentos Nacionales de Seguridad para Obras Civiles, Buenos Aires.
  12. Darmawan, M.S. (2009), "A case-study of structural assessment of steel structure subjected to differential settlement of foundation", 1st International Conference on Rehabilitation and Maintenance in Civil Engineering (ICRMCE), Solo, Indonesia, 312-320.
  13. Garcia-Palencia, A.J. and Godoy, L.A. (2013), "Fatigue experiments on folded plate steel cladding under wind", Struct. Eng. Mech., 46(3), 387-402. https://doi.org/10.12989/sem.2013.46.3.387
  14. Godoy, L.A. and Sosa, E.M. (2002), "Deflections of thin-walled storage tanks with roof due to localized support settlement", Proc. II Int. Conf. on Advances in Structural Engineering and Mechanics, Techno Press, Seoul, Korea.
  15. Godoy, L.A. and Sosa, E.M. (2003), "Localized support settlements of thin-walled storage tanks", Thin Wall. Struct., 41, 941-955. https://doi.org/10.1016/S0263-8231(03)00043-0
  16. Gong, J., Cui, W. and Zeng, S. (2012), "Buckling analysis of large scale oil tanks with a conical roof subjected to harmonic settlement", Thin Wall. Struct., 52(7), 143-148. https://doi.org/10.1016/j.tws.2011.12.011
  17. Gong, J., Tao, J., Zhao, J., Zeng, S. and Jin T. (2013), "Effect of top stiffening rings of open top tanks on critical harmonic settlement", Thin Wall. Struct., 65, 62-71. https://doi.org/10.1016/j.tws.2013.01.011
  18. Gong, J., Tao, J., Zhao, J., Zeng, S. and Jin, T. (2013), "Buckling analysis of open top tanks subjected to harmonic settlement", Thin Wall. Struct., 63, 37-43. https://doi.org/10.1016/j.tws.2012.09.009
  19. Gong, J., Zeng, S. and Jin, T. (2013), "Effect of hydrostatic pressure on buckling behavior of storage tanks under local support settlement", ASME Pressure Vessels and Piping Conf., Design and Analysis, 3, Paris, France.
  20. Jonaidi, M. and Ansourian, P. (1998), "Harmonic settlement effects on uniform and tapered tank shells", Thin Wall. Struct., 31, 237-255. https://doi.org/10.1016/S0263-8231(98)00007-X
  21. Riks, E. (1979), "An incremental approach to the solution of snapping and buckling problems", Int. J. Solid. Struct., 15, 529-551. https://doi.org/10.1016/0020-7683(79)90081-7
  22. Riks, E. (1972), "The application of Newton's method to the problem of elastic stability", J. Appl. Mech., 39, 1060-1065. https://doi.org/10.1115/1.3422829
  23. Rosario-Galanes, O. and Godoy, L.A. (2014), "Modeling of wind-induced fatigue of cold-formed steel sheet panels", Struct. Eng. Mech., 49(2), 237-259. https://doi.org/10.12989/sem.2014.49.2.237
  24. Sebastian, W.M. (2010), "Criteria for uniqueness and extrema of moments in continuous end spans with differential settlement", Eng. Struct., 32, 1568-1576. https://doi.org/10.1016/j.engstruct.2010.02.005
  25. Thangaraj, D.D. and Ilamparuthi, K. (2012), "Numerical analyses of soil-mat foundation and space frame system", Int. Multis. Mech., 5(3), 267-285. https://doi.org/10.12989/imm.2012.5.3.267
  26. Zhao, Y., Cao, Q.S. and Xie, X.Y. (2006), "Floating roof steel tanks under harmonic settlement: FE parametric study and design criterion", Journal of Zhejiang University, Science A, 7(3), 398-406. https://doi.org/10.1631/jzus.2006.A0398