DOI QR코드

DOI QR Code

고분자전해질 연료전지 분리판을 위한 Ni-P-rGO 무전해 복합도금층의 미세조직 분석

Microstructure Analysis of Ni-P-rGO Electroless Composite Plating Layer for PEM Fuel Cell Separator

  • Kim, Yeonjae (Dongnam Regional Division, Korea Institute of Industrial Technology) ;
  • Kim, Jungsoo (Dongnam Regional Division, Korea Institute of Industrial Technology) ;
  • Jang, Jaeho (Dongnam Regional Division, Korea Institute of Industrial Technology) ;
  • Park, Won-Wook (Department of Nano Science & Engineering, Inje University) ;
  • Nam, Dae-Geun (Dongnam Regional Division, Korea Institute of Industrial Technology)
  • 투고 : 2015.09.14
  • 심사 : 2015.10.30
  • 발행 : 2015.10.31

초록

Recently, fuel cell is a good alternative for energy source. Separator is a important component for fuel cell. In this study, The surface of separator was modified for corrosion resistance and electric conductivity. Reduced graphene oxide (rGO) was made by Staudenmaier's method. Nickel, phosphorus and rGO were coated on 6061 aluminum alloy as a separator of proton exchange membrane fuel cell by composite electroless plating. Scanning electron microscope, energy-dispersive X-ray spectroscopy and X-ray photoelectron spectroscopy were used to examine the morphology of Ni-P-rGO. Surface images were shown that the rGO was dispersed on the surface of Ni-P electroless plating, and nickel was combined with the un-reduced oxygen functional group of rGO.

키워드

참고문헌

  1. EGG Services, Fuel Cell Handbook, U.S. Dep. of Energy, Morgatown (2000).
  2. A. Boudghene Stambouli and E. Traversa, Renewable and Sustainable Energy Rev. 6, 297 (2002).
  3. H. Allen, E. Ashey, D. Gore, J. Woerner and M. Cervi, Naval Engineers J. 110, 93 (1998).
  4. G.J.K. Acres and G.A. Hards, Philosophical Transactions 354, 1653 (1996). https://doi.org/10.1098/rsta.1996.0071
  5. M.P. Brady, H. Wang, B. Yang, J.A. Turner, M. Bordignon, R. Molins, M. Abd Elhamid, L. Lipp and L.R. Walker, Int. J. Hydrogen Energy 32, 3778 (2007). https://doi.org/10.1016/j.ijhydene.2006.08.044
  6. H. Tsuchiya and O. Kobayashi, Int. J. Hydrogen Energy 29 (2004) 985. https://doi.org/10.1016/j.ijhydene.2003.10.011
  7. F.J. He, Y.Z. Fang and S.J. Jin, Wear 261, 939 (2013).
  8. Jintao Tian, Xuezhong Liu, Jianfei Wang, Xin Wang and Yansheng Yin, Mater. Chemistry and Physics 124, 751 (2010). https://doi.org/10.1016/j.matchemphys.2010.07.053
  9. J.N. Balaraju and K.S. Rajam, Surface and Coatings Tech. 195, 166 (2005).
  10. D. Takacs, L. Sziraki, T.I. Torok, J. Solyom, Z. Gacsi and K. Gal-Solymos, Surface and Coatings Tech. 201, 4526 (2007). https://doi.org/10.1016/j.surfcoat.2006.09.045
  11. D. Kim, W. Oh, J. Kim, D.G. Nam, J. Jang and J.S. Bae, J. Kor. Physical Society 64, L429 (2014). https://doi.org/10.3938/jkps.64.429
  12. Ye Tian, Yanxia Liu, Fu Pang, Fengli Wang and Xiao Zhang, Colloids and Surfaces 464, 96 (2015). https://doi.org/10.1016/j.colsurfa.2014.10.027