Nuclear Engineering and Technology

Korean Nuclear Society (한국원자력학회)
권호 표지
DOI QR코드

DOI QR Code

THERMAL-HYDRAULIC CHARACTERISTICS FOR CANFLEX FUEL CHANNEL USING BURNABLE POISON IN CANDU REACTOR

  • Received : 2015.01.14
  • Accepted : 2015.03.14
  • Published : 2015.10.25
⟨ Previous Next ⟩

Abstract

The thermalehydraulic characteristics for the CANadian Deuterium Uranium Flexible (CANFLEX)-burnable poison (BP) fuel channel, which is loaded with a BP at the center ring based on the CANFLEX-RU (recycled uranium) fuel channel, are evaluated and compared with that of standard 37-element and CANFLEX-NU (natural uranium) fuel channels. The distributions of fuel temperature and critical channel power for the CANFLEX-BP fuel channel are calculated using the NUclear Heat Transport CIRcuit Thermohydraulics Analysis Code (NUCIRC) code for various creep rate and burnup. CANFLEX-BP fuel channel has been revealed to have a lower fuel temperature compared with that of a standard 37-element fuel channel, especially for high power channels. The critical channel power of CANFLEX-BP fuel channel has increased by about 10%, relative to that of a standard 37-element fuel channel for 380 channels in a core, and has higher value relative to that of the CANFLEX-NU fuel channel except the channels in the outer core. This study has shown that the use of a BP is feasible to enhance the thermal performance by the axial heat flux distribution, as well as the improvement of the reactor physical safety characteristics, and thus the reactor safety can be improved by the use of BP in a CANDU reactor.

Keywords

Acknowledgement

Supported by : National Research Foundation of Korea (NRF)

References

  1. T.E. Schaubel, CNSC Staff Reviewof Pickering NGS-B Integrated Safety Review, Safety Analysis Safety Factors Report, 2008.
  2. G.H. Roh, Y.H. Kim, N.Z. Cho, Improvement of power coefficient by using burnable poison in the CANDU reactor, Nucl. Eng. Design. 241 (2011) 1565-1578. https://doi.org/10.1016/j.nucengdes.2011.01.050
  3. J.H. Lau, F.J. Doria, H. Chow, L.K.H. Leung, S. Palleck, K.S. Sim, Z. He, P. Purdy, Design and qualification of the Bruce CANFLEX low void reactivity fuel bundle - an overview, Proceedings of the 25th CNS Annual Conference, Toronto, Ontario, June 6-9, 2004.
  4. M.F. Lightstone, NUCIRC-MOD1.505 User's Manual, TTR-516, Atomic Energy of Canada Limited, 1993.
  5. J.H. Park, H.B. Choi, M.S. Yang, Progress of the DUPIC fuel compatibility analysis - II. Thermal hydraulics, Nucl. Technol. 153 (2006) 164-174. https://doi.org/10.13182/NT06-A3697
  6. W.J. Hartmann, NUCIRC Predictions of channel flow and comparison with ste measurements at the Point Lepreau Generating Station, in: Proceedings of the CNS 13th Annual Reactor Simulation Symposium, Chalk River, Ontario, Canada, 1987.
  7. J.H. Bae, G.H. Roh, J.H. Park, Comparison of fuel temperature characteristics between standard 37 element and CANFLEX fuel bundles, in: Korean Nuclear Society Autumn Meeting, 2010.
  8. P.G. Boczar, I.J. Hastings, A. Celli, Recycling in CANDU of Uranium and/or Plutonium from Spent LWR Fuel, AECL Report, AECL-10018, 1989.
  9. R.J. Stamm'ler, J.J. Casal, E.A. Villarino, A.A. Ferri, HELIOS Methods, Studsvik Scanpower, 1998.
  10. J.H. Bae, J.Y. Jeong, Fuel temperature characteristics for fuel channels using burnable poison in the CANDU reactor, in: Korean Nuclear Society Spring Meeting, 2013.
  11. L.K.H. Leung, D.C. Groeneveld, G.R. Dimmick, D.E. Bullock, W.W. Inch, Critical heat flux and pressure drop for a CANFLEX bundle string inside an axially non-uniform flow channel, in: Proceedings of the 6th International Conference on CANDU Fuel, Canadian Nuclear Society, 1999.
  12. J.H. Bae, G.H.Roh, Y.M. Song, Thermal-hydraulic characteristics for fuel channels using burnable poison in the CANDU reactor, in: Korean Nuclear Society Autumn Meeting, 2012.
  13. L.K.H. Leung, J.S. Jun, D.E. Bullock, W.W. Inch, H.C. Suk, Dryout power in a CANFLEX bundle string with raised bearing pads, in: 7th International Conference on CANDU Fuel, Canadian Nuclear Society, 2001.

Cited by

  1. Effect of power variations across a fuel bundle and within a fuel element on fuel centerline temperature in PHWR bundles in uncrept and crept pressure tubes vol.102, pp.None, 2015, https://doi.org/10.1016/j.anucene.2016.12.016
  2. Computational analysis of gas-liquid flow in an idealised CANDU reactor header under conditions that are relevant to small-break loss-of-coolant and loss-of-flow accidents vol.378, pp.None, 2021, https://doi.org/10.1016/j.nucengdes.2021.111054