DOI QR코드

DOI QR Code

Effect on Tooling Characteristics to DLC-coated Thickness of Tool for Graphite Material

흑연소재가공용 공구의 DLC 코팅두께가 가공특성에 미치는 영향

  • Received : 2015.10.10
  • Accepted : 2015.10.20
  • Published : 2015.10.31

Abstract

Processing of low toughness graphite material requires high-speed machine tools and DLC coating. In this study, results of investigation of the tool wear and machining properties of the DLC coating according to the thickness, and the machining time of the tool used for the machining of graphite electrodes, were as follows. 1. DLC coating thickness shows a larger wear amount of the tool center in accordance with thickness; the wear amount of the tool increases in proportion to the machining time. 2. The difference between the amount of wear depending on the processing time shows edge portions larger than the tool wear amount in the center. This amount of wear of the tool edge is formed since the rotating torque is in contact with the graphite material surface significantly more than the central portion. 3. The thicker the DLC coating, the more the coating tool eliminated of the coating area by the interface between the cemented carbide tool being coated with an increased friction of the graphite material and the DLC coating area.

Keywords

References

  1. Kim, S. H. and Lim, H. S., "Development of Micro Milling EDM and Analysis of Machined Characteristics," Spring Conf. of KSME, pp. 64-65, 2015.
  2. You, K. J., Sung, B. S., and Seh, I. M., "The Radiation Fin Cutting Roll Development using the Electric-discharge Machining Method," J. of KSMPE, Vol. 12, No. 2, pp. 34-40, 2013.
  3. Damasceno, J. C., Camargo Jr., S. S., and Cremona, M., "Optical and Mechanical Properities of DLC-Si Coating on Polycarbonate," Thin Solid Films, Vol. 433, pp. 199-204, 2003. https://doi.org/10.1016/S0040-6090(03)00313-4
  4. Grill, A., "Electrical and Optical Properties of Diamond-Like Carbon," Thin Solid Films, Vol. 355-356, pp. 189-193, 1999. https://doi.org/10.1016/S0040-6090(99)00516-7
  5. Kim, T. G., Oh, J. S., Yoon, H. K., and Kim, H. S., "Characteristics of DLC Films Incorporated HMDS by RF PECVD," International Journal of Modern Physics B, Vol. 4, pp. 999-3004, 15-16, 2010.
  6. Lee, K. Y. and Hong, C. S., "Improvement of Cutting Performance of DLC Coated WC against Al Alloy," Autumn Conf. of KSPSE, pp. 261-266, 2006.
  7. Ha, S. H., Lee, D. W., Rehman, A.U., Wasy, A., and Song, J. I., "Characterization of Fracture Toughness and Wear Behavior for Plasma Ceramic Coated Materials," J. of KSMPE, Vol. 12, No. 4, pp. 123-130, 2013.
  8. Nguyen, V. C., Kim, T. H., Kim, H. S., Shin, D. C., and Kim, T. G., "Characteristic of Nitrogen doped Diamond-Like Carbon Film on the Silicon Substrates", J. of KSMPE, Vol. 12, No. 2, pp. 34-40, 2013.