펄프종이기술 (Journal of Korea Technical Association of The Pulp and Paper Industry)

한국펄프종이공학회 (Korea Technical Association of the Pulp and Paper Industry)
권호 표지
DOI QR코드

DOI QR Code

SB latex 대체용 친환경 전분계 바이오바인더 및 합성바인더의 적용 기술 개발 (제1보) - 대체용 바인더의 Pre-coating 적용 -

Application Technology of Environmental-friendly Starch-based Biobinder and Synthesized Binder in order to Substitute SB Latex for Paper Coating (1) - Application of Substitute Binder for Pre-coating Layer -

  • 이용규 (강원대학교 산림환경과학대학 제지공학과) ;
  • 김선구 (강원대학교 산림환경과학대학 제지공학과) ;
  • 원종명 (강원대학교 산림환경과학대학 제지공학과) ;
  • 김영훈 (깨끗한나라 주식회사)
  • Lee, Yong Kyu (Dept. of Paper Science & Engineering, College of Forest & Environmental Sciences, Kangwon National University) ;
  • Kim, Sun-Goo (Dept. of Paper Science & Engineering, College of Forest & Environmental Sciences, Kangwon National University) ;
  • Won, Jong Myoung (Dept. of Paper Science & Engineering, College of Forest & Environmental Sciences, Kangwon National University) ;
  • Kim, Young-Hun (Kleannara)
  • 투고 : 2015.10.05
  • 심사 : 2015.10.23
  • 발행 : 2015.10.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

This study was carried out to evaluate whether EVAc, acryl latex and biobinder could substitute the part of SB latex for pre-coating color formula or not. Different coating colors prepared through the substitution of 30% SB latex with EVAc, acryl latex, and biobinder were applied for pre-coating layer. 100% SB latex is used as a binder for top coating color. The optical properties, gloss, roughness, stiffness, dry- and wet-pick strength were measured. There were no significant differences in the brightness, whiteness, opacity, roughness, ink set-off and gloss of paper coated with 5 different coating colors. However the stiffness, dry- and wet-pick strength were somewhat lower than those of conventional coating color which 100% SB latex was used as a binder. Although the part of SB latex could be substituted with EVAc, acryl latex and biobinder without sacrificing the qualities of coated paper. Further researches on the improvement of stiffness, dry- and wet-pick strength, and the optimization of rheology of coating color in order to improve the qualities of coated paper are strongly recommended.

키워드

참고문헌

  1. Bloembergen, S., McLennan, I., Lee, D. I., and van Leeuwen, J., Paper binder performance with biobased nanoparticles, Paper $360^{\circ}$ Magazine 3(8):46-48 (2008).
  2. Bloembergen, S., McLennan, I., van Leeuwen, J., and Lee, D. I., Ongoing developments in biolatex binders with a very low carbon footprint for paper and board manufacturing, 64th Appita Annual Conference & Exhibition, Melbourne, Australia, April 19-21, pp. 363-369 (2010).
  3. Tamai, H., Niino, K., and Suzawa, T., Surface characterization of styrene/sodium styrenesulfonate copolymer latex particles, Journal of Colloid and Interface Science 13(1):1-7 (1989).
  4. Bloembergen, S., VanEgdom, E., Wildi, R., McLennan, I. J., Lee, D. I., Klass, C. P., and van Leeuwen, J., Biolatex binders for paper and paperboard applications, JPPS 36(3-4) (2011).
  5. Kentta, E., Pohler, T., and Juvonen, K., Latex uniformity in the coating layer of paper, Nordic Pulp & Paper Research Journal 21(5):665-669 (2006). https://doi.org/10.3183/NPPRJ-2006-21-05-p665-669
  6. Al-Turaif, H., Unertl, W. N., and Lepoutre, P., Effect of pigmentation on the surface chemistry and surface free energy of paper coating binders, Journal of Adhesion Science and Technology 9(7):801-811 (1995). https://doi.org/10.1163/156856195X00707
  7. Hermann, W. O. and Haehnel, W., Process for the preparation of polymerized vinyl alcohol and its derivatives, U.S. Patent 1,672,156 and Germany Patent 450,028 (1928).