DOI QR코드

DOI QR Code

An Experimental Study on the Shear Hysteresis Behavior of Shallow Corrugated Steel Plate

얕은 파형강판의 전단이력거동에 관한 실험적 분석

  • 이승재 (한국기술교육대학교 건축공학부) ;
  • 유미나 (한국기술교육대학교 대학원 건축공학과) ;
  • 손수덕 (한국기술교육대학교 건축공학부)
  • Received : 2015.06.26
  • Accepted : 2015.10.08
  • Published : 2015.10.30

Abstract

The steel plate shear wall system is a lateral load resisting system and has higher strength and shear performance than the shear wall of concrete structures. Using corrugated steel plates in shear wall systems improves out-of-plane stiffness and flexibility in the deformation along the corrugation. However, various buckling behaviors are generated according to the corrugated shapes and it is difficult to predict the relationship between the corrugated shape and the shear buckling behavior. In this study, a cyclic loading test of the shallow corrugated steel plate was performed to evaluate the effects of shear buckling and structural performance of corrugated steel plate and the resistance force and energy dissipation capacity were compared according to the test results. The test results showed that the model with $15^{\circ}$ angle between the horizontal panel and the slated panel had a greater accumulated energy than the model with $30^{\circ}$ angle and the shape of the corrugated steel plate had a large effect on the generation of buckling and energy dissipation capacity.

Keywords

Acknowledgement

Supported by : 한국연구재단

References

  1. Abbas, H., Sause, R., & Driver, R. (2006) Behavior of corrugated web I-girders under in-plane loads. Journal of Engineering Mechanics, 132(8), 806-814. https://doi.org/10.1061/(ASCE)0733-9399(2006)132:8(806)
  2. Abbas, H., Sause, R., & Driver, R. (2002) Shear strength and stability of high performance steel corrugated web girders. Social Stability Research Council Conference, 361-388.
  3. Arie, R., Reza, S., & Huigert, H. (2009) Basic parametric study on corrugated web girders with cut outs. Journal of Constructional Steel Research, 65, 395-407. https://doi.org/10.1016/j.jcsr.2008.02.006
  4. Davis, J. (1978) Simplified Diaphragm Analysis. Journal of the Structural Division(ASCE), 103(ST11), 2093-2109.
  5. Driver, R., Abaas, H. & Sause, R. (2006) Shear behavior of corrugated web bridge girder. Journal of Structural Engineering, 132(2), 195-203. https://doi.org/10.1061/(ASCE)0733-9445(2006)132:2(195)
  6. Easley, J. & McFarland, D. (1969) Buckling of light-gauge corrugated metal shear diaphragms. Journal of the Structural Division(ASCE), 95, 1497-1516.
  7. Eldib, M. (2009) Shear buckling strength and design of curved corrugated steel webs for bridges. Journal of Constructional Steel Research, 65, 2129-2139. https://doi.org/10.1016/j.jcsr.2009.07.002
  8. Emami, F., Mofid, M., & Vafai, A. (2013) Experimental study on cyclic behavior of trapezoidally corrugated steel shear walls. Journal of Engineering Structures, 48, 750-762. https://doi.org/10.1016/j.engstruct.2012.11.028
  9. Fereshtech, E., Massood, M., & Abolhassan V. (2013) Experimental study on cyclic behavior of trapezoidally corrugated steel shear walls. Journal of Engineering Structures, 48, 750-762. https://doi.org/10.1016/j.engstruct.2012.11.028
  10. Gill, H., Lee, S., Lee, H., & Lee, P. (2003) A Study on the Geometric Parameters that Influence the Shear Buckling of Trapezoidally Corrugated Webs. Journal of Korean Society of Steel Construction, 15(5), 591-602.
  11. Gill, H., Lee, S., Lee, H., & Yoon, T. (2004) Shear Buckling Strength of Trapezoidally Corrugated Steel Webs for Bridges. Journal of Korean Society of Civil Engineers, 24(1A), 197-2002.
  12. Hamilton, R. (1993) Behavoir of welled girder with corrugated webs, Ph. D. Thesis, University of Maine, Orono, Maine, Canada.
  13. Han, T., Lim, N., Park, N., & Kang, Y. (2002) Elastic Shear Buckling Characteristics of Circularly Corrugated Plates. Journal of Korean Society of Steel Construction, 14(4), 529-538.
  14. Hassanein, M., & Kharoob, O. (2013a) Behavior of bridge girders with corrugated webs: (II) Shear strength and design. Journal of Engineering Structures, 57, 544-553. https://doi.org/10.1016/j.engstruct.2013.04.015
  15. Hassanein, M., & Kharoob, O. (2013b) Behavior of bridge girders with corrugated webs: (I) Real boundary condition at the juncture of the web and flanges. Journal of Engineering Structures, 57, 554-564. https://doi.org/10.1016/j.engstruct.2013.03.004
  16. Ji, H. (2011) Buckling Behaviors of Plate Girder with Corrugated Steel Web. Journal of Korean Society of Steel Construction, 23(2), 221-228.
  17. Jung, K., & Kim, Y. (2012) Bending Analysis and Flexural Rigidity of Rectangular Corrugated Plates. Journal of the Korean Society for Power System Engineering, 16(6), 38-44.
  18. Kim, Y. (2014) Static Analysis of Trapezoidal Corrugated Plates under Uniformly Distributed Load. Journal of the Korean Society for Power System Engineering, 18(1), 99-105.
  19. Kim, Y., Lho, S., Park, M., Do, B., Ju, Y., & Kim, S. (2012) Shear Capacity of Corrugated Web Beam for Roof Frame of Industrial Building. Journal of the Architectural Institute of Korea, 28(9), 57-65.
  20. Lee, K., Li, R., Chen, L., Oh, K., & Kim, W. (2013) Strip Angle Changes in Accordance with the Deformation Mode of Seismic Steel Plate Shear Wall Systems. Journal of Korean Society of Steel Construction, 25(5), 497-507. https://doi.org/10.7781/kjoss.2013.25.5.497
  21. Lee, M., & Moon, T. (2005) An Experimental Study on the Behavior of Steel Plate Shear Panel under Cyclic Loading. Journal of the Architectural Institute of Korea, Construction section, 21(11), 95-102.
  22. Lee, M., Oh, S., Yoon, M., & Moon, T. (2006) Analysis of Steel-Plate Shear Panels using Strip Model, Review of Architecture and Building Science. Journal of the Architectural Institute of Korea, Construction section, 22(3), 79-86. (Korean)
  23. Lindner, J., & Huang, B. (1995) Beulwerte fur trapezformig profilierte bleche unter schubbeanspruchung. Stahlbau, 64(2), 370-374.
  24. Mang, H. (1976) Finite Element Analysis of Doubly Corrugated Shells. Journal of the Structural Division(ASCE), 102(10), 2033-2051.
  25. McFarland, D. (1967) An investigation of the static stability of corrugated rectangular plates loaded in pure shear, Ph.D. thesis, University of Kansas.
  26. Moon, J., Yi, J., Choi, B., & Lee, H. (2008) Shear Design of Trapezoidally Corrugated Steel Webs. Journal of Korean Society of Civil Engineers, 28(4A), 497-504.
  27. Moon, J., Yi, J., Choi, B., & Lee, H. (2009) Lateral-torsional buckling of I-girder with corrugated webs under uniform bending. Journal of Thin-Walled Structures, 47, 21-30. https://doi.org/10.1016/j.tws.2008.04.005
  28. Mukhopadhyay, M. (1999) Finite element static and dynamic analyses of folded plates. Journal of Engineering Structures, 21, 277-287. https://doi.org/10.1016/S0141-0296(97)90172-3
  29. Nie, J., Zhu, L., Tao, M., & Tang, L. (2013) Shear strength of trapezoidal corrugated steel webs. Journal of Constructional Steel Research, 85, 105-115. https://doi.org/10.1016/j.jcsr.2013.02.012
  30. Nilson, H., & Ammar, A. (1974) Finite Element Analysis of Metal Deck Shear Diaphragms. Journal of the Structural Division(ASCE), 100(4), 711-726.
  31. Sause, R., & Braxtan, T. (2011) Shear strength of trapezoidal corrugated steel webs. Journal of Constructional Steel Research, 67, 223-236. https://doi.org/10.1016/j.jcsr.2010.08.004
  32. Seo, K., Kim, S., Yhim, S., & Chu, S. (2005) Analysis of Corrugated Sheets using Equivalent Orthotropic Plate. Journal of Korean Society of Civil Engineers, 25(1A), 19-29.
  33. Shahmohammadi, A., Mirghaderi, R., Hajsadeghi, M., & Khanmohammadi, M. (2013) Application of corrugated plates as the web of steel coupling beams. Journal of Constructional Steel Research, 85, 178-190. https://doi.org/10.1016/j.jcsr.2013.02.009
  34. Shon, S., Yoo, M., Lee, S., & Kang, J. (2014) An Investigation of the Shear Buckling Characteristics of Sinusoidal Corrugated Steel Plates. Journal of Korea Institute for Structural Maintenance and Inspection, 18(3), 10-19. https://doi.org/10.11112/jksmi.2014.18.3.010
  35. Shon, S., Yoo, M., Lee, S., & Kang, J. (2014) The Comparative Study on the Shear Buckling Stress of Trapezoidal and Sinusoidal Corrugated Steel Plate. Journal of the Architectural Institute of Korea, 30(9), 11-18.
  36. Shon, S., Yoo, M., Lee, S., & Kang, J. (2015) A Comparative Study on Shear Buckling and Interactive Buckling Characteristics of Trapezoidal and Sinusoidal Corrugated Steel Plate. Journal of the Architectural Institute of Korea, 31(4), 39-46.
  37. Ye, Z., Berdichevsky, V., & Yu, W. (2014) An equivalent classical plate model of corrugated structures, International journal of solids and structures, 51, 2073-2083. https://doi.org/10.1016/j.ijsolstr.2014.02.025
  38. Yi, J., Gill, H., & Lee, H. (2005) Elastic Interactive Shear Buckling Behavior of Trapezoidally Corrugated Steel Webs. Journal of Korean Society of Steel Construction, 17(6), 707-715.
  39. Yi, J., Youm, K., Moon, J., & Lee, H. (2007) Shear Buckling Strength of Trapezoidally Corrugated Steel Webs. Journal of Korean Society of Civil Engineers, 27(2A), 181-186.
  40. Yoo, M., Shon, S., Lee, S., & Kang, J. (2013) A Study on Shear Buckling Analysis and Boundary Condition of Sinusoidal Corrugated Plate by Using ABAQUS. Journal of the Architectural Institute of Korea, 29(11), 3-11.

Cited by

  1. An Experimental Study on the Shear Hysteresis and Energy Dissipation of the Steel Frame with a Trapezoidal-Corrugated Steel Plate vol.10, pp.3, 2017, https://doi.org/10.3390/ma10030261