초록
주원료인 쌀과 부원료인 마른새우의 농수산 복합물을 single screw extruder를 이용하고, 다목적 식품소재의 적용을 위하여 원료독립변수 3개(쌀의 함수율, 쌀의 입도, 마른새우 첨가율)와 작동독립변수 4개(barrel 온도, screw 속도, 토출구직경, 원료투입량)의 총 독립변수 7개의 조건변화에 의한 5개의 종속변수(팽화도, 함수율, 명도, 균질성, 생산성)의 특성은 다음과 같다. 쌀의 함수율을 12, 14, 16, 18%로 조건 변화하여 collets을 제조할 경우, collets의 팽화도는 그 값이 증가하다가 감소하였고, 함수율 및 명도는 증가하였고, 균질성은 감소하는 경향이었다. 쌀의 입도를 raw, 20, 40, 60 mesh로 조건 변화하여 collets을 제조할 경우, collets의 팽화도는 그 값이 미미하나마 감소하였으나 유의적인 큰 차이가 없었고, 함수율은 raw에 비해 20 mesh 입자의 크기로 작아질 때 함수율이 감소하였으나 20 mesh 이상으로 더 분쇄하여 입자의 크기가 작아지더라도 변화 없이 거의 일정하였으며, 명도는 쌀 입도의 크기에 따른 유의차가 없었고, 균질성은 증가하는 경향이었다. 마른새우의 첨가율을 2, 4, 6, 8%로 조건 변화하여 collets을 제조할 경우, collets의 함수율 및 명도는 증가하였고, 팽화도 및 균질성은 감소하는 경향이었다. Barrel 온도를 90, 95, 100, $110^{\circ}C$로 조건 변화하여 collets을 제조할 경우, collets의 팽화도 및 균질성은 유의적으로 증가하였고, 함수율 및 명도는 감소하는 경향이었다. Screw 속도를 210, 280, 340 rpm으로 조건 변화하여 collets을 제조할 경우, collets의 팽화도, 균질성 및 생산성은 증가하였고, 함수율 및 명도는 감소하였다. 토출구 직경을 4, 6, 8, 10 mm로 조건 변화하여 collets을 제조할 경우, collets의 팽화도 및 균질성은 감소하였고, 함수율 및 명도는 증가하였으며, 생산성은 그 값이 증가하다가 일정하였다. 원료투입량을 30, 40, 50, 60 kg/h로 조건 변화하여 collets을 제조할 경우, collets의 팽화도, 함수율, 명도 및 생산성은 증가하였고, 균질성은 감소하였다. 이와 같이 쌀을 주원료로 하고 부원료로 마른새우를 첨가하여 collets을 제조할 경우, 독립변수의 변화에 따라 종속변수의 값이 변화하여 최종제품인 collets의 품질에 영향을 미쳤다. 따라서 품질이 좋은 collets을 제조하기 위해서는 독립변수를 잘 설정할 필요가 있다고 판단되었다.
This study was carried out to investigate the characteristics of the dependent variables depending on the condition changes of independent variable of the operation and the material during the production of collets added with rice and dried shrimp by using single extruder to utilize as basic data for the manufacture of extrusion collets. A total of 7 independent variables were set up as a raw, 20, 40 and 60 mesh for the powder particle size of rice; 12, 14, 16 and 18% for the moisture content of rice; 2, 4, 6 and 8% for the addition amount of dried shrimp; 90, 95, 100 and $110^{\circ}C$ for the barrel temperature; 210, 280 and 340 rpm for the screw speed; 4, 6, 8 and 10 mm for the discharge port diameter; 30, 40, 50 and 60 kg/h for the input amount of the mixed material. The characteristics of the dependent variables including puffing ratio, moisture content, lightness, uniformity, productivity of collets was to be studied by changing the conditions of the independent variables. As a results of this study, 20 mesh of powder particle size of rice, 14% of moisture content of rice, 4% of addition amount of dried shrimp, $100^{\circ}C$ of barrel temperature, 280 rpm of screw speed, 6 mm of discharge port diameter and 50 kg/h of input amount of mixed material were found to be the most preferable over other independent variables for the production of extrusion collets. In conclusion, it is necessary to set the independent variable in order to produce the high quality collets added with the rice as the main raw material and dried shrimp as the sub-materials.