DOI QR코드

DOI QR Code

Reliability-based assessment of American and European specifications for square CFT stub columns

  • Lu, Zhao-Hui (National Engineering Laboratory for High Speed Railway Construction, School of Civil Engineering, Central South University) ;
  • Zhao, Yan-Gang (National Engineering Laboratory for High Speed Railway Construction, School of Civil Engineering, Central South University) ;
  • Yu, Zhi-Wu (National Engineering Laboratory for High Speed Railway Construction, School of Civil Engineering, Central South University) ;
  • Chen, Cheng (Department of Civil Engineering, San Francisco State University)
  • 투고 : 2014.10.27
  • 심사 : 2015.02.28
  • 발행 : 2015.10.25

초록

This paper presents a probabilistic investigation of American and European specifications (i.e., AISC and Eurocode 4) for square concrete-filled steel tubular (CFT) stub columns. The study is based on experimental results of 100 axially loaded square CFT stub columns from the literature. By comparing experimental results for ultimate loads with code-predicted column resistances, the uncertainty of resistance models is analyzed and it is found that the modeling uncertainty parameter can be described using random variables of lognormal distribution. Reliability analyses were then performed with/without considering the modeling uncertainty parameter and the safety level of the specifications is evaluated in terms of sufficient and uniform reliability criteria. Results show that: (1) The AISC design code provided slightly conservative results of square CFT stub columns with reliability indices larger than 3.25 and the uniformness of reliability indices is no better because of the quality of the resistance model; (2) The uniformness of reliability indices for the Eurocode 4 was better than that of AISC, but the reliability indices of columns designed following the Eurocode 4 were found to be quite below the target reliability level of Eurocode 4.

키워드

과제정보

연구 과제 주관 기관 : National Natural Science Foundation of China

참고문헌

  1. AISC (2005), Load and resistance factor design (LRFD) specification for structural steel buildings, American Institute of Steel Construction, Chicago, USA.
  2. Ang, A.H.-S. and Tang, W.H. (2006), Probability Concepts in Engineering: Emphasis on Applications to Civil and Environmental Engineering, (2nd Edition), John Wiley & Sons, New York, NY, USA.
  3. Bartlett, F.M. and MacGregor, J.G. (1996), "Statistical analysis of compressive strength of concrete in structures", ACI Mater. J., 93(2), 158-168.
  4. Beck, A.T., de Oliveira, W.L.A., Nardim, S.D. and ElDebs, A.L.H.C. (2009), "Reliability-based evaluation of design code provisions for circular concrete-filled steel columns", Eng. Struct., 31(10), 2299-2308. https://doi.org/10.1016/j.engstruct.2009.05.004
  5. Cai, J. and He, Z.Q. (2006), "Axial load behavior of square CFT stub column with binding bars", J. Constr. Steel Res., 62(5), 472-483. https://doi.org/10.1016/j.jcsr.2005.09.010
  6. Chen, C.C., Ko, J.W., Huang, G.L. and Chang, Y.M. (2012), "Mechanical performance of stirrup-confined concrete-filled steel tubular stub columns under axial loading", J. Constr. Steel Res., 78(11), 8-21. https://doi.org/10.1016/j.jcsr.2012.06.006
  7. Ellingwood, B.R. and Galambos, T.V. (1982), "Probability-based criteria for structural design", Struct. Saf., 1(1), 15-26. https://doi.org/10.1016/0167-4730(82)90012-1
  8. Eurocode 4 (2004), Design of composite steel and concrete structures, Part 1.1, General rules and rules for buildings; EN 1994-1-1. UK, British Standards Institution: European Committee for Standardization.
  9. Eurocode 2 (2004), Design of concrete structures-Part 1-1: General rules and rules for buildings; EN 1992-1-1. UK, British Standards Institution: European Committee for Standardization.
  10. Evirgen, B., Tuncan, A. and Taskin, K. (2014), "Structural behavior of concrete filled steel tubular sections (CFT/CFSt) under axial compression", Thin-Wall. Struct., 80(7), 46-56. https://doi.org/10.1016/j.tws.2014.02.022
  11. Ge, H. and Usami, T. (1992), "Strength of concrete-filled thin-walled steel box columns: Experiment", J. Struct. Eng.-ASCE, 118(11), 3036-3054. https://doi.org/10.1061/(ASCE)0733-9445(1992)118:11(3036)
  12. Han, L.H. and Tao, Z. (2001), "Study on behavior of concrete filled square steel tubes under axial load", J. Civil Eng., 34(2), 18-25. [In Chinese]
  13. Huang, Y., Long, Y.L. and Cai, J. (2008), "Ultimate strength of rectangular concrete-filled steel tubular (CFT) stub columns under axial compression", Steel Compos. Struct., Int. J., 8(2), 115-128. https://doi.org/10.12989/scs.2008.8.2.115
  14. Kato, B. (1995), "Compressive strength and deformation capacity of concrete-filled tubular stub columns (Strength and rotation capacity of concrete-filled tubular columns, Part 1)", J. Struct. Constr. Eng., 468, 183-191.
  15. Lam, D. and Williams, C.A. (2004), "Experimental study on concrete filled square hollow sections", Steel Compos. Struct., Int. J., 4(2), 95-112. https://doi.org/10.12989/scs.2004.4.2.095
  16. Liu, D. (2005), "Test on high-strength rectangular concrete-filled steel hollow section stub columns", J. Constr. Steel Res., 61(7), 902-911. https://doi.org/10.1016/j.jcsr.2005.01.001
  17. Liu, D. and Gho, W.M. (2005), "Axial load behaviour of high-strength rectangular concrete-filled steel tubular stub columns", Thin-Wall. Struct., 43(7), 1131-1142. https://doi.org/10.1016/j.tws.2005.03.007
  18. Lundberg, J.E. and Galambos, T.V. (1996), "Load and resistance factor design of composite columns", Struct. Saf., 18(2/3), 169-177. https://doi.org/10.1016/0167-4730(96)00009-4
  19. Nowak, A.S. and Collins, K. (2000), Reliability of Structure, McGraw-Hill, New York, NY, USA.
  20. Rashid, M.A., Mansur, M.A. and Paramasivam, P. (2002), "Correlations between mechanical properties of high-strength concrete". J. Mater. Civil Eng., 14(3), 230-238. https://doi.org/10.1061/(ASCE)0899-1561(2002)14:3(230)
  21. Sakino, K., Nakahara, H., Morino, S. and Nishiyama, I. (2004), "Behavior of centrally loaded concrete-filled steel-tube short columns", J. Struct. Eng.-ASCE, 130(2), 180-188. https://doi.org/10.1061/(ASCE)0733-9445(2004)130:2(180)
  22. Tomii, M. and Sakino, K. (1979), "Experimental studies on the ultimate moment of concrete filled square steel tubular beam-columns", J. Struct. Constr. Eng, 275, 55-65.
  23. Uy, B. (2000), "Strength of concrete filled steel box columns incorporating local buckling", J. Struct. Eng.-ASCE, 126(3), 341-352. https://doi.org/10.1061/(ASCE)0733-9445(2000)126:3(341)
  24. Uy, B., Tao, Z. and Han, L.H. (2011), "Behaviour of short and slender concrete-filled stainless steel tubular columns", J. Constr. Steel Res., 67(3), 360-378. https://doi.org/10.1016/j.jcsr.2010.10.004
  25. Yamamoto, T., Kawaguchi, J., Morino, S. and Koike, S. (2003), "Experimental study on the scale effect on stress-strain relations of concrete-filled steel tubular short columns (Part 11)", Summaries of Technical Papers of Annual Meeting Architectural Institute of Japan. C-1, Structures III, Timber structures steel structures steel reinforced concrete structures, Nagoya, Japan, September. [In Japanese]

피인용 문헌

  1. An efficient method for reliable optimum design of trusses vol.21, pp.5, 2016, https://doi.org/10.12989/scs.2016.21.5.1069
  2. Semi-analytical solutions of ultimate load for a rectangular concrete-filled tubular column subjected to eccentric compression pp.2116-7214, 2018, https://doi.org/10.1080/19648189.2018.1482791
  3. Reliability analysis-based conjugate map of beams reinforced by ZnO nanoparticles using sinusoidal shear deformation theory vol.28, pp.2, 2015, https://doi.org/10.12989/scs.2018.28.2.195
  4. Local buckling of rectangular steel tubes filled with concrete vol.31, pp.2, 2015, https://doi.org/10.12989/scs.2019.31.2.201