DOI QR코드

DOI QR Code

Studies into a high performance composite connection for high-rise buildings

  • Lou, G.B. (State Key Laboratory for Disaster Reduction in Civil Engineering, Tongji University) ;
  • Wang, A.J. (Corporate Technical Management, CapitaLand Management (China) Co., Ltd.)
  • 투고 : 2013.06.30
  • 심사 : 2015.02.27
  • 발행 : 2015.10.25

초록

This paper presents experimental and numerical studies into the structural behavior of a high performance corbel type composite connection adopted in Raffles City of Hangzhou, China. Physical tests under both monotonic and quasi-static cyclic loads were conducted to investigate the load carrying capacities and deformation characteristics of this new type of composite connection. A variety of structural responses are examined in detail, including load-deformation characteristics, the development of sectional direct and shear strains, and the history of cumulative plastic deformation and energy. A three-dimensional finite element model built up with solid elements was also proposed for the verification against test results. The studies demonstrate the high rigidity, strength and rotation capacities of the corbel type composite connections, and give detailed structural understanding for engineering design and practice. Structural engineers are encouraged to adopt the proposed corbel type composite connections in mega high-rise buildings to achieve an economical and buildable and architectural friendly engineering solution.

키워드

참고문헌

  1. Ahmed, B. and Nethercot, D.A. (1996), "Effect of high shear on the moment capacity of composite cruciform endplate connections", J. Construct. Steel Res., 40(2), 129-163. https://doi.org/10.1016/S0143-974X(96)00045-4
  2. American Institute of Steel Construction (2005), ANSI/AISC 360-05: Specification for Structural Steel Buildings.
  3. ANSYS (2011), User's Manual Version 12.1, ANSYS.
  4. ASTM (2011), E2126-11: Standard Test Methods for Cyclic (Reversed) Load Test for Shear Resistance of Vertical Elements of the Lateral Force Resisting Systems for Buildings.
  5. British Standards Institution (BSI) (2004), Eurocode 4: Design of Composite Steel and Concrete Structures, Part 1.1: General Rules and Rules for Buildings, European Committee for Standardization.
  6. British Standards Institution (BSI) (2005), Eurocode 3: Design of Steel Structures, Part 1.8: Design of Joints, European Committee for Standardization.
  7. Brockenbrough, R.L. and Merritt, F.S. (2006), Structural Steel Designer's Handbook, American Institute of Steel Construction.
  8. Brown, N.D. and Anderson, D. (2001), "Structural properties of composite major axis end plate connections", J. Construct. Steel Res., 57(3), 327-349. https://doi.org/10.1016/S0143-974X(00)00034-1
  9. China Academy of Building Research (CABR) (1997), Specification of Test Methods for Earthquake Resistant Building, CABR.
  10. Davison, J.B., Lam, D. and Nethercot, D.A. (1990), "Semi-rigid action of composite joints", Struct. Eng., 68(24), 489-499.
  11. Fang, L.X., Chan, S.L. and Wong, Y.L. (2000), "Numerical analysis of composite frames with partial shear-stud interaction by one element per member", Eng. Struct., 22(10), 1285-1300. https://doi.org/10.1016/S0141-0296(99)00081-4
  12. Lawson, R.M. and Gibbons, C. (1995), Moment Connections in Composite Construction: Interim Guidance for End-plate Connections; The Steel Construction Institute.
  13. Li, T.Q., Nethercot, D.A. and Choo, B.S. (1996), "Behaviour of flush end-plate composite connections with unbalanced moment and variable shear/moment ratios. Part 1: Experimental behaviour", J. Construct. Steel Res., 38(2), 125-164. https://doi.org/10.1016/0143-974X(96)00015-6
  14. Nethercot, D.A. and Li, T.Q. (1995), "Design of semi-continuous composite frames", Proceedings of International Conference on Structural Stability and Design, Sydney, Australia, October-November, pp. 277-282.
  15. Queiroz, G., Mata, L.A.C. and Franco, J.R.Q. (2005), "Analysis of composite connections in unbraced frames subjected to wind and gravity load", J. Construct. Steel Res., 61(8), 1075-1093. https://doi.org/10.1016/j.jcsr.2005.02.002
  16. The Steel Construction Institute (SCI) & The British Constructional Steelwork Association Limited (BCSA) (2002), Joints in Steel Construction, the Steel Construction Institute.
  17. Vasdravellis, G., Valente, M. and Castiglioni, C.A. (2009a), "Behaviour of exterior partial-strength composite beam-to-column connections: Experimental study and numerical simulations", J. Construct. Steel Res., 65(1), 23-35. https://doi.org/10.1016/j.jcsr.2008.01.034
  18. Vasdravellis, G., Valente, M. and Castiglioni, C.A. (2009b), "Dynamic response of composite frames with different shear connection degree", J. Construct. Steel Res., 65(10-11), 2050-2061. https://doi.org/10.1016/j.jcsr.2009.05.001
  19. Wang, A.J. (2010), "A study on composite end-plate connections with flexible tensile reinforcements and shear connectors", Can. J. Civil Eng., 37(11), 1437-1450. https://doi.org/10.1139/L10-089
  20. Wang, A.J. (2011), "Studies on composite joints under gravity and lateral loads", Australian J. Struct. Eng., 12(1), 69-85.
  21. Wang, A.J. (2012), "A study on semi-continuous composite beams with realistic modelling of end-plate connections", Australian J. Struct. Eng., 13(3), 259-277.
  22. Xiao, Y., Choo, B.S. and Nethercot, D.A. (1994), "Composite connections in steel and concrete. Part 1: Experimental behaviour of composite beam-column connections", J. Construct. Steel Res., 31(1), 3-30. https://doi.org/10.1016/0143-974X(94)90021-3

피인용 문헌

  1. The Evolution of Seismic Engineering and Design of Ultra Tall Buildings in China Innovations and Sustainability vol.5, pp.3, 2016, https://doi.org/10.21022/IJHRB.2016.5.3.221
  2. Evolution of modern mega-buildings in China: innovations and sustainability vol.169, pp.3, 2016, https://doi.org/10.1680/jcien.15.00063
  3. Studies on restoring force model of concrete filled steel tubular laced column to composite box-beam connections vol.22, pp.6, 2015, https://doi.org/10.12989/scs.2016.22.6.1217
  4. Raffles City in Hangzhou China -The Engineering of a 'Vertical City' of Vibrant Waves- vol.6, pp.1, 2015, https://doi.org/10.21022/ijhrb.2017.6.1.33
  5. Multi-Dimensional Hybrid Design and Construction of Skyscraper Cluster -Innovative Engineering of Raffles City Chongqing- vol.6, pp.3, 2017, https://doi.org/10.21022/ijhrb.2017.6.3.261