참고문헌
- Doege, E. and Sommer, N., "Optimization of the Blank-Holder Force on Deep Drawing of Rectangular Parts," Stahl Eisen, Vol. 103, No. 3, pp. 139-142, 1983.
- Zhong-Qin, L., Wu-Rong, W., and Guan-Long, C., "A New Strategy to Optimize Variable Blank Holder Force towards Improving the Forming Limits of Aluminum Sheet Metal Forming," Journal of Materials Processing Technology, Vol. 183, No. 2, pp. 339-346, 2007. https://doi.org/10.1016/j.jmatprotec.2006.10.027
- Gunnarsson, L. and Schedin, E., "Improving the Properties of Exterior Body Panels in Automobiles Using Variable Blank Holder Force," Journal of Materials Processing Technology, Vol. 114, No. 2, pp. 168-173, 2001. https://doi.org/10.1016/S0924-0136(01)00727-0
- Kitayama, S., Hamano, S., Yamazaki, K., Kubo, T., Nishikawa, H., et al., "A Closed-Loop Type Algorithm for Determination of Variable Blank Holder Force Trajectory and Its Application to Square Cup Deep Drawing," The International Journal of Advanced Manufacturing Technology, Vol. 51, No. 5-8, pp. 507-517, 2010. https://doi.org/10.1007/s00170-010-2656-9
- Wang, L. and Lee, T., "Controlled Strain Path Forming Process with Space Variant Blank Holder Force Using RSM Method," Journal of Materials Processing Technology, Vol. 167, No. 2, pp. 447-455, 2005. https://doi.org/10.1016/j.jmatprotec.2005.06.017
- Chengzhi, S., Guanlong, C., and Zhongqin, L., "Determining the Optimum Variable Blank-Holder Forces Using Adaptive Response Surface Methodology (ARSM)," The International Journal of Advanced Manufacturing Technology, Vol. 26, No. 1-2, pp. 23-29, 2005. https://doi.org/10.1007/s00170-003-1979-1
- Jeong, H. G., "Numerical Study on the Improvement of Formability of Automobile Panel by Blank Holding Force Control," M.Sc. Thesis, Department of Product Design and Manufacturing and Engineering, Seoul National University of Science and Technology, 2015.
- Cha, S. H., Lee, C. J., Lee, S. K., Kim, B. H., Ko, D. C., et al., "An Effective Design Method of Stamping Process by Feasible Formability Diagram," J. Korean Soc. Precis. Eng., Vol. 26, No. 11, pp. 108-115, 2009.
- Kubli, W. and Reissner, J., "Optimization of Sheet-Metal Forming Processes Using the Special-Purpose Program Autoform," Journal of Materials Processing Technology, Vol. 50, No. 1, pp. 292-305, 1995. https://doi.org/10.1016/0924-0136(94)01390-M
- Stoughton, T. B. and Zhu, X., "Review of Theoretical Models of the Strain-Based FLD and Their Relevance to the Stress-Based FLD," International Journal of Plasticity, Vol. 20, No. 8, pp. 1463-1486, 2004. https://doi.org/10.1016/j.ijplas.2003.11.004
- Kubli, W. and Sester, M., "Forming Limit Strain Analysis," US Patent, No. 7870792 B2, 2008.
- Stoughton, T. B. and Yoon, J. W., "Path Independent Forming Limits in Strain and Stress Spaces," International Journal of Solids and Structures, Vol. 49, No. 25, pp. 3616-3625, 2012. https://doi.org/10.1016/j.ijsolstr.2012.08.004
- AutoForm Engineering GmbH, "AutoForm R3.1 Incremental Manual," 2015.
- Kitayama, S., Kita, K., and Yamazaki, K., "Optimization of Variable Blank Holder Force Trajectory via Sequential Approximate Optimization with Radial Basis Function Network," Proc. of the 10th World Congress on Structural and Multidisciplinary Optimization, 2013.