참고문헌
- Japan Atomic Energy Agency, The Licensing Document for the Construction Permit of the Prototype FBR Monju, 1980 [In Japanese].
- Nuclear Regulation Authority [Internet], 2013. Available from: http://www.nsr.go.jp/english/regulatory/index.html. Last accessed date 26.01.15.
- Japan Atomic Energy Agency, Improvement of Accident Management for the Prototype FBR Monju, 2008 [In Japanese]. Available from: http://www.jaea.go.jp/04/turuga/jturuga/press/2008/03/p080317.pdf.
- G. Kussmaul, W. Vaeth, J. Wolff, J. Dadillon, M. Haessler, F. Sabathier, The CABRI Project - Overall Status and Achievements, Proceedings of Science and Technology of Fast Reactor Safety, Guernsey, vol. I, 1986, p. 103.
- M. Haessler, D. Struwe, A.T.D. Butland, N. Nonaka, I. Sato, J. Papin, The CABRI-2 Programme - Overview on Results, Proceedings of the International Fast Reactor Safety Meeting, Snowbird, vol. II, 1990, p. 209.
- K. Konishi, S. Kubo, I. Sato, K. Koyama, J. Toyooka, K. Kamiyama, S. Kotake, A.D. Vurim, V.A. Gaidaichuk, A.V. Pakhnits, Y.S. Vassiliev, The EAGLE project to eliminate the recriticality issues of fast reactors - progress and results of in-pile tests, Proc. NTHAS5, Jeju, Korea (Nov 26-29, 2006).
- K. Konishi, J. Toyooka, K. Kamiyama, I. Sato, S. Kubo, S. Kotake, K. Koyama, A.D. Vurim, V.A. Gaidaichuk, A.V. Pakhnits, Y.S. Vassiliev, The results of a wall failure inpile experiment under the EAGLE project, Nucl. Eng. Des. 237 (2007) 2165-2174. https://doi.org/10.1016/j.nucengdes.2007.03.012
- N. Nonaka, I. Sato, Improvement of evaluation method for initiating-phase energetics based on CABRI-1 in-pile experiments, Nucl. Technol. 98 (1992) 54-69. https://doi.org/10.13182/NT92-A34650
- S. Kondo, K. Morita, Y. Tobita, N. Shirakawa, SIMMER-III: An advanced computer program for LMFBR severe accident analysis, Proc. ANP'92, IV, p. 40.5-1, Tokyo, Japan, Oct 25-29, 1992.
- Y. Tobita, S. Kondo, H. Yamano, K. Morita, W. Maschek, P. Coste, T. Cadiou, The Development of SIMMER-III, an advanced computer program for LMFR safety analysis and its application to sodium experiments, Nucl. Technol. 153 (2006) 245-255. https://doi.org/10.13182/NT06-2
- A.E. Wright, D.S. Dutt, L.J. Harrison, Fast Reactor Safety Testing in TREAT in the 1980s, Proc. Int. Fast Reactor Safety Meeting, vol. II, 1990, p. 233. Snowbird.
- A.M. Tentner, D.P. Weber, G. Birgersson, G.L. Bordner, L.L. Briggs, J.E. Cahalan, F.E. Dunn, Kalimullah, K.J. Miles, F.G. Prohammer, The SAS4A LMFBR Whole Core Accident Analysis Code, Proc. Int. Mtg. Fast Reactor Safety, 1985, pp. 989-998. Knoxville, TN.
- I. Sato, H. Yamano, Y. Tobita, Development of Severe Accident Evaluation Technology (Level 2 PSA) for Sodiumcooled Fast Reactors - (2) Identification of Dominant Factors in Initiating Phase of Unprotected Events, Proc. ICAPP '09, Paper 9132, Tokyo, Japan, 2009.
- H. Niwa, A comprehensive approach of reactor safety research aiming at elimination of recriticality in CDA for commercialization of LMFBR, Prog. Nucl. Energy, 32 (1998) 621-629. https://doi.org/10.1016/S0149-1970(97)00066-8
- K. Kamiyama, Y. Tobita, T. Suzuki, K. Matsuba, Development of an assessment methodology for the molten-fuel discharge behavior in the core disruptive accident of sodium-cooled fast reactors, Proc. ISSNP2013, Beijing, China (Nov. 22-24, 2013).
- J. Toyooka, H. Endo, Y. Tobita, H. Ninokata, A Study on mechanism of early failure of inner duct wall within fuel subassembly with high heat flux from molten core materials based on analysis of an EAGLE experiment simulating core disruptive accidents in an LMFBR, Trans. Atomic Energy Soc. Jpn. ,12 (2013) 50-66 [in Japanese]. https://doi.org/10.3327/taesj.J12.004
- K. Kamiyama, D.J. Brear, Y. Tobita, S. Kondo, Establishment of freezing model for reactor safety analysis, J. Nucl. Sci. Technol., 43 (2006) 1206-1217. https://doi.org/10.1080/18811248.2006.9711213
- H. Nakamura, R.J. Lipinski, A Method to Calculate Boiling and Dryout in Debris Bed Using a Heat Conduction Code, Proc. Int. Topical Meeting on Fast Reactor Safety, vol. 1, 1985, pp. 767-773. Knoxville, TN.
- F. Yamada, M. Minami, Development of the Monju Core Safety Analysis Numerical Models by Super-COPD Code, JAEA-Data/Code 2010-023 [in Japanese], 2010.
- ANSYS [Internet], 2014. Available from: http://www.ansys.com/Products/Simulation+Technology/Fluid+Dynamics/Fluid+Dynamics+Products/ANSYS+Fluent. Last accessed date 26.01.15.
- H. Ohshima, H. Narita, H. Ninokata, Analysis of Thermalehydraulic Behavior in a Fast Reactor Fuel Subassembly with Porous Blockages, Proc. Int. Topical Mtg. Advanced Reactor Safety, vol. 2, Orland, FL, USA, Jun. 1-5, 1997.
피인용 문헌
- Feasibility study on ultralong‐cycle operation and material performance for compact liquid metal‐cooled fast reactors: a review work vol.39, pp.14, 2015, https://doi.org/10.1002/er.3384
- Next Generation Design Codes for a New Technological Platform for Nuclear Power vol.120, pp.6, 2015, https://doi.org/10.1007/s10512-016-0145-4
- Power flattening study of ultra‐long cycle fast reactor using thorium fuel vol.40, pp.12, 2015, https://doi.org/10.1002/er.3552
- Design study of long‐life small modular sodium‐cooled fast reactor vol.41, pp.1, 2015, https://doi.org/10.1002/er.3609
- Improvement of a physical model for blockage formation of solid-liquid mixture flow with freezing for core safety evaluation of SFRs vol.55, pp.5, 2018, https://doi.org/10.1080/00223131.2017.1417172
- The EUCLID/V1 Integrated Code for Safety Assessment of Liquid Metal Cooled Fast Reactors. Part 1: Basic Models vol.65, pp.5, 2015, https://doi.org/10.1134/s0040601518050063
- Investigation of flow-regime characteristics in a sloshing pool with mixed-size solid particles vol.52, pp.5, 2020, https://doi.org/10.1016/j.net.2019.11.006
- Study on dominant aspects of unprotected loss-of-flow to be evaluated in the initiating phase for a sodium-cooled fast reactor vol.58, pp.3, 2015, https://doi.org/10.1080/00223131.2020.1838964
- Numerical modeling of radiation heat transfer from combusting droplets for a sodium fire analysis vol.380, pp.None, 2015, https://doi.org/10.1016/j.nucengdes.2021.111258
- Natural convection phenomena in a liquid metal pool due to relocated and heap of heat-generating core debris: Numerical study vol.385, pp.None, 2015, https://doi.org/10.1016/j.nucengdes.2021.111520