Smart Structures and Systems

  • 제16권4호
  • /
  • Pages.725-742
  • /
  • 2015
  • /
  • 1738-1584(pISSN)
  • /
  • 1738-1991(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Performance of TMDs on nonlinear structures subjected to near-fault earthquakes

  • Domizio, Martin (Structural Engineering Master Program. Engineering Faculty, National University of Cuyo) ;
  • Ambrosini, Daniel (Structural Engineering Master Program. Engineering Faculty, National University of Cuyo) ;
  • Curadelli, Oscar (Structural Engineering Master Program. Engineering Faculty, National University of Cuyo)
  • 투고 : 2014.10.24
  • 심사 : 2015.05.13
  • 발행 : 2015.10.25
⟨ 이전 논문 다음 논문 ⟩

초록

Tuned mass dampers (TMD) are devices employed in vibration control since the beginning of the twentieth century. However, their implementation for controlling the seismic response in civil structures is more recent. While the efficiency of TMD on structures under far-field earthquakes has been demonstrated, the convenience of its employment against near-fault earthquakes is still under discussion. In this context, the study of this type of device is raised, not as an alternative to the seismic isolation, which is clearly a better choice for new buildings, but rather as an improvement in the structural safety of existing buildings. Seismic records with an impulsive character have been registered in the vicinity of faults that cause seismic events. In this paper, the ability of TMD to control the response of structures that experience inelastic deformations and eventually reach collapse subject to the action of such earthquakes is studied. The results of a series of nonlinear dynamic analyses are presented. These analyses are performed on a numerical model of a structure under the action of near-fault earthquakes. The structure analyzed in this study is a steel frame which behaves as a single degree of freedom (SDOF) system. TMD with different mass values are added on the numerical model of the structure, and the TMD performance is evaluated by comparing the response of the structure with and without the control device.

키워드

참고문헌

  1. Aly, A.M. (2014), "Vibration control of high-rise buildings for wind: a robust passive and active tuned mass damper", Smart Struct. Syst., 13(3), 473-500. https://doi.org/10.12989/sss.2014.13.3.473
  2. ANSYS, I. (2010), Theory reference, Canonsburg: ANSYS, Inc.
  3. Arias, A. (1970), "A measure of earthquake intensity", In: Seismic Design for Nuclear Power Plants. (Ed. R.J. Hansen), Massachusetts Inst. of Tech. Press, Cambridge, MA.
  4. Bernal, D. (1996), "Influence of ground motion characteristics on the effectiveness of tuned mass dampers", Proceedings of the 11th World Conference on Earthquake Engineering. Acapulco, Mexico, June.
  5. Chakraborty, S. and Roy, B.K. (2011), "Reliability based optimum design of tuned mass damper in seismic vibration control of structures with bounded uncertain parameters", Probabilist. Eng. Mech., 26(2), 215-221. https://doi.org/10.1016/j.probengmech.2010.07.007
  6. Chang, C.C. (1999), "Mass dampers and their optimal designs for building vibration control", Eng. Struct., 21(5), 454-463. https://doi.org/10.1016/S0141-0296(97)00213-7
  7. Domizio, M., Ambrosini, D. and Curadelli, O. (2015a), "Experimental and numerical analysis to collapse of a framed structure subjected to seismic loading", Eng. Struct., 82, 22-32. https://doi.org/10.1016/j.engstruct.2014.10.022
  8. Domizio, M., Ambrosini, D. and Curadelli, O. (2015b), "Performance of tuned mass damper against structural collapse due to near fault earthquakes", J. Sound Vib., 336, 32-45. https://doi.org/10.1016/j.jsv.2014.10.007
  9. Domizio, M.N. (2013), Analisis numerico y experimental del desempeno de amortiguadores de masa sintonizada frente a sismos de falla cercana, M.Eng. Dissertation, National University of Cuyo, Mendoza, Argentina.
  10. Frahm, H. (1909), Device for damped vibrations of bodies, US patent No. 989958.
  11. He, W. and Agrawal, A.K. (2008), "Analytical model of ground motion pulses for the design", J. Struct. Eng. - ASCE, 134(7), 1177-1188. https://doi.org/10.1061/(ASCE)0733-9445(2008)134:7(1177)
  12. Igusa, T. and Xu, K. (1994), "Vibration control using multiple tuned mass dampers", J. Sound Vib., 175(4), 491-503. https://doi.org/10.1006/jsvi.1994.1341
  13. Iwanami, K. and Seto, K. (1984), "An optimum design method for the dual dynamic damper and its effectiveness", Bull. JSME, 27, 1965-1973. https://doi.org/10.1299/jsme1958.27.1965
  14. Lee, C., Chen, Y., Chung, L. and Wang, Y. (2006), "Optimal design theories and applications of tuned mass dampers", Eng. Struct., 28(1), 43-53. https://doi.org/10.1016/j.engstruct.2005.06.023
  15. Lee, C.S., Goda, K. and Hong, H.P. (2012), "Effectiveness of using tuned-mass dampers in reducing seismic risk", Struct. Infraestruct. E., 8(2), 141-156. https://doi.org/10.1080/15732470903419669
  16. Li, C. and Zhu, B. (2006), "Estimating double tuned mass dampers for structures under ground acceleration using a novel optimum criterion", J. Sound Vib., 298(1-2), 280-297. https://doi.org/10.1016/j.jsv.2006.05.018
  17. Li, H.N. and Ni, X.L. (2007), "Optimization of non-uniformly distributed multiple tuned mass damper", J. Sound Vib., 308(1-2), 80-97. https://doi.org/10.1016/j.jsv.2007.07.014
  18. Lukkunaprasit, P. and Wanitkorkul, A. (2001), "Inelastic buildings with tuned mass dampers under moderate ground motions from distant earthquakes", Earthq. Eng. Struct. D., 30(4), 537-551. https://doi.org/10.1002/eqe.22
  19. Marano, G.C., Greco, R. and Sgobba, S. (2010), "A comparison between different robust optimum design approaches: application to tuned mass dampers", Probabilist. Eng. Mech., 25(1), 108-118. https://doi.org/10.1016/j.probengmech.2009.08.004
  20. Matta, E. (2013), "Effectiveness of tuned mass dampers against ground motion pulses", J. Struct. Eng.- ASCE, 139(2), 188-198. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000629
  21. Matta, E. (2011), "Performance of tuned mass dampers against near-field earthquakes", Struct. Eng. Mech., 39(5), 621-642. https://doi.org/10.12989/sem.2011.39.5.621
  22. Matta, E. and Destefano, A. (2009), "Seismic performance of pendulum and translational roof-garden tmds", Mech. Syst. Signal Pr., 23(3), 908-921. https://doi.org/10.1016/j.ymssp.2008.07.007
  23. Miranda, J.C. (2013), "A method for tuning tuned mass dampers for seismic applications", Earthq. Eng. Struct. D., 42(7), 1103-1110. https://doi.org/10.1002/eqe.2271
  24. Mohebbi, M. and Joghataie, A. (2012), "Designing optimal tuned mass dampers for nonlinear frames by distributed genetic algorithms", Struct. Des. Tall Spec., 21(1), 57-76. https://doi.org/10.1002/tal.702
  25. Nigdeli, S.M. and Bekdas, G. (2013), "Optimum tuned mass damper design for preventing brittle fracture of rc buildings", Smart Struct. Syst., 12(2), 137-155. https://doi.org/10.12989/sss.2013.12.2.137
  26. Pinkaew, T., Lukkunaprasit, P. and Chatupote, P. (2003), "Seismic effectiveness of tuned mass dampers for damage reduction of structures", Eng. Struct., 25(1), 39-46. https://doi.org/10.1016/S0141-0296(02)00115-3
  27. Rana, R. and Soong, T.T. (1998), "Parametric study and simplified design of tuned mass dampers", Eng. Struct., 20(3), 193-204. https://doi.org/10.1016/S0141-0296(97)00078-3
  28. Sgobba, S. and Marano, G.C. (2010), "Optimum design of linear tuned mass dampers for structures with nonlinear behaviour", Mech. Syst. Signal Pr., 24(6), 1739-1755. https://doi.org/10.1016/j.ymssp.2010.01.009
  29. Sladek, J.R. and Klingner, R.E. (1983), "Effect of tuned mass dampers on seismic response", J. Struct. Eng. - ASCE, 109(8), 2004-2009. https://doi.org/10.1061/(ASCE)0733-9445(1983)109:8(2004)
  30. Sun, C. and Nagarajaiah, S. (2014), "Study on semi-active tuned mass damper with variable damping and stiffness under seismic excitations", Struct. Control Heal. Monit., 21(6), 890-906. https://doi.org/10.1002/stc.1620
  31. Sun, C., Nagarajaiah, S. and Dick, A.J. (2014), "Family of smart tuned mass dampers with variable frequency under harmonic excitations and ground motions: closed-form evaluationde la estructura", Smart Struct. Syst., 13(2), 319-341. https://doi.org/10.12989/sss.2014.13.2.319
  32. Tributsch, A. and Adam, C. (2012), "Evaluation and analytical approximation of tuned mass damper performance in an earthquake environment", Smart Struct. Syst., 10(2), 155-179. https://doi.org/10.12989/sss.2012.10.2.155
  33. Trifunac, M. and Brady, A.G. (1975), "A study on the duration of strong earthquake ground motion", B. Seismol. Soc. Am., 65(3), 581-626.
  34. Villaverde, R. (1994), "Seismic control of structures with damped resonant appendages", Proceedings of the 1st World Conference on Structural Control, Vol. 1. Los Angeles, USA, August.
  35. Wang, J. and Lin, C. (2005), "Seismic performance of multiple tuned mass dampers for soil-irregular building interaction systems", Int. J. Solids Struct., 42(20), 5536-5554. https://doi.org/10.1016/j.ijsolstr.2005.02.042
  36. Warburton, G.B. (1982), "Optimal absorber parameters for various combinations of response and excitation parameters", Earthq. Eng. Struct. D., 10(3), 381-402. https://doi.org/10.1002/eqe.4290100304
  37. Warnitchai, P. and Hoang, N. (2006), "Optimal placement and tuning of multiple tuned mass dampers for suppressing multi-mode structural response", Smart Struct. Syst., 2(1), 1-24. https://doi.org/10.12989/sss.2006.2.1.001
  38. Weber, B. and Feltrin, G. (2010), "Assessment of long-term behavior of tuned mass dampers by system identification", Eng. Struct., 32(11), 3670-3682. https://doi.org/10.1016/j.engstruct.2010.08.011
  39. Wong, K.K.F. and Johnson, J. (2009), "Seismic energy dissipation of inelastic structures with multiple tuned mass dampers", J. Eng. Mech.- ASCE, 135(4), 265-276. https://doi.org/10.1061/(ASCE)0733-9399(2009)135:4(265)
  40. Woo, S.S., Lee, S.H. and Chung, L. (2011), "Seismic response control of elastic and inelastic structures by using passive and semi-active tuned mass dampers", Smart Struct. Syst., 8(3), 239-252. https://doi.org/10.12989/sss.2011.8.3.239
  41. Zhang, H., Shi, Y. and Saadat, A. (2011), "Robust non-fragile dynamic vibration absorbers with uncertain factors", J. Sound Vib., 330(4), 559-566. https://doi.org/10.1016/j.jsv.2010.10.012
  42. Zhang, Z. and Balendra, T. (2013), "Passive control of bilinear hysteretic structures by tuned mass damper for narrow band seismic motions", Eng. Struct., 54, 103-111. https://doi.org/10.1016/j.engstruct.2013.03.044
  43. Zuo, L. (2009), "Effective and robust vibration control using series multiple tuned-mass dampers", J. Vib. Acoust., 131, 031003. https://doi.org/10.1115/1.3085879

피인용 문헌

  1. Reliability-based design of semi-rigidly connected base-isolated buildings subjected to stochastic near-fault excitations vol.11, pp.4, 2016, https://doi.org/10.12989/eas.2016.11.4.701
  2. Adaptive multiple tuned mass dampers based on modal parameters for earthquake response reduction in multi-story buildings vol.20, pp.9, 2017, https://doi.org/10.1177/1369433216678863
  3. The tuned mass-damper-inerter for harmonic vibrations suppression, attached mass reduction, and energy harvesting vol.19, pp.6, 2017, https://doi.org/10.12989/sss.2017.19.6.665
  4. Multiple wall dampers for multi-mode vibration control of building structures under earthquake excitation vol.63, pp.4, 2017, https://doi.org/10.12989/sem.2017.63.4.537
  5. Self-control of high rise building L-shape in plan considering soil structure interaction vol.6, pp.3, 2015, https://doi.org/10.12989/csm.2017.6.3.229
  6. Analysis of near-fault pulse-like seismic signals through Variational Mode Decomposition technique vol.193, pp.None, 2015, https://doi.org/10.1016/j.engstruct.2019.05.003
  7. TMD effectiveness in nonlinear RC structures subjected to near fault earthquakes vol.24, pp.4, 2019, https://doi.org/10.12989/sss.2019.24.4.447
  8. Analytical Method for Designing the Tuned Mass Damper Based on the Complex Stiffness Theory vol.43, pp.4, 2015, https://doi.org/10.1007/s40996-018-0222-0
  9. Semi-active eddy current pendulum tuned mass damper with variable frequency and damping vol.25, pp.1, 2015, https://doi.org/10.12989/sss.2020.25.1.065