DOI QR코드

DOI QR Code

Development of a displacement-based design approach for modern mixed RC-URM wall structures

  • Paparoa, Alessandro (Earthquake Engineering and Structural Dynamics (EESD), School of Architectural, Civil and Environmental Engineering (ENAC), Ecole Polytechnique Federale de Lausanne (EPFL)) ;
  • Beyer, Katrin (Earthquake Engineering and Structural Dynamics (EESD), School of Architectural, Civil and Environmental Engineering (ENAC), Ecole Polytechnique Federale de Lausanne (EPFL))
  • 투고 : 2014.07.29
  • 심사 : 2015.06.08
  • 발행 : 2015.10.25

초록

The recent re-assessment of the seismic hazard in Europe led for many regions of low to moderate seismicity to an increase in the seismic demand. As a consequence, several modern unreinforced masonry (URM) buildings, constructed with reinforced concrete (RC) slabs that provide an efficient rigid diaphragm action, no longer satisfy the seismic design check and have been retrofitted by adding or replacing URM walls with RC walls. Of late, also several new construction projects have been conceived directly as buildings with both RC and URM walls. Despite the widespread use of such construction technique, very little is known about the seismic behaviour of mixed RC-URM wall structures and codes do not provide adequate support to designers. The aim of the paper is therefore to propose a displacement-based design methodology for the design of mixed RC-URM edifices and the retrofit of URM buildings by replacing or adding selected URM walls with RC ones. The article describes also two tools developed for estimating important quantities relevant for the displacement-based design of structures with both RC and URM walls. The tools are (i) a mechanical model based on the shear-flexure interaction between URM and RC walls and (ii) an elastic model for estimating the contribution of the RC slabs to the overturning moment capacity of the system. In the last part of the article the proposed design method is verified through nonlinear dynamic analyses of several case studies. These results show that the proposed design approach has the ability of controlling the displacement profile of the designed structures, avoiding concentration of deformations in one single storey, a typical feature of URM wall structures.

키워드

참고문헌

  1. Beyer, K., Tondelli, M., Petry, S. and Peloso, S. (2014), "Dynamic testing of a 4-storey building with reinforced concrete and unreinforced masonry walls", to be submitted to Bull. Earthq. Eng.
  2. Cardone, D., Dolce, M. and Palermo, G. (2009), "Direct displacement-based design of seismically isolated bridges", Bull. Earthq. Eng., 7(2), 391-410. https://doi.org/10.1007/s10518-008-9069-2
  3. Cattari, S. and Lagomarsino, S. (2013), "Seismic assessment of mixed masonry-reinforced concrete buildings by non-linear static analyses", Earthq. Struct., 4(3), 1-24. https://doi.org/10.12989/eas.2013.4.1.001
  4. Chiarugi, A. (1970), "Indagine sulla ripartizione delle azioni orrizzontali in telai irrigiditi da pareti", Giornale del Genio Civile, 2, 187-203.
  5. EN 1992-1-1 (2004), Eurocode 2: Design of concrete structures - Part 1-1: General rules and rules for buildings, CEN, Brussels.
  6. EN 1998-1 (2004), Eurocode 8: Design of structures for earthquake resistance - Part 1: General rules, seismic actions and rules for buildings, CEN, Brussels.
  7. EN 1998-3 (2005), Eurocode 8: Design of structures for earthquake resistance - Part 3: Assessment and retrofitting of buildings, CEN, Brussels.
  8. Graziotti, F. (2013), "Contribution towards a displacement-based seismic assessment of masonry structures", Pavia, Italy.
  9. Hannenwald, P. (2013), "Seismic behaviour of poorly detailed RC bridge piers" Ph.D. thesis, EPFL, Lausanne, Switzerland.
  10. Lagomarsino, S., Penna, A., Galasco, A. and Cattari, S. (2013), "TREMURI program: An equivalent frame model for the nonlinear seismic analysis of masonry buildings", Eng. Struct., 56, 1787-1799. https://doi.org/10.1016/j.engstruct.2013.08.002
  11. Lang, K. (2002), "Seismic vulnerability of existing buildings", Ph.D. Dissertation, ETH Zurich, Switzerland.
  12. Magenes, G. (2006), "Masonry building design in seismic areas: recent experiences and prospects form and European standpoint", Keynote address, Proceedings of the 1st European Conference on Earthquake Engineering and Seismology, Geneva, Switzerland.
  13. Mandirola, M. (2014), "Non-linear macroelement modelling of experimental tests on masonry building specimens with rigid diaphragms", Pavia, Italy.
  14. Mann, W. and Muller, H. (1982), "Failure of shear-stressed masonry: an enlarged theory, tests and application to shear walls", Proceedings of British Ceramic Society, Stoke-on-Trent, Great Britain.
  15. Michel, C., Lestuzzi, P. and Lacave, C. (2014), "Simplified non-linear seismic displacement demand prediction for low period structures", Bull. Earthq. Eng., 12(4), 1972-1998.
  16. Paparo, A. and Beyer, K. (2014), "Quasi-static tests of two mixed reinforced concrete - unreinforced masonry wall structures", Eng. Struct., 71, 201-211. https://doi.org/10.1016/j.engstruct.2014.04.002
  17. Paparo, A. and Beyer, K. (2015), "Modelling the seismic response of modern URM buildings retrofitted by adding RC walls", J. Earthq. Eng., in press.
  18. Paulay, T. and Priestley, M.N.J. (1992), Seismic design of reinforced concrete and masonry buildings, John Wiley & Sons, Inc., New York.
  19. Penna, A., Lagomarsino, S. and Galasco, A. (2013), "A nonlinear macro-element model for the seismic analyses of masonry buildings", Earthq. Eng. Struct. Dyn., doi:10.1002/eqe.2335.
  20. Pennuci, D., Calvi, G.M. and Sullivan, T.J. (2009), "Displacement-based design of pre-cast walls with additional dampers", J. Earthq. Eng., 13(S1), 40-65. https://doi.org/10.1080/13632460902813265
  21. Pennucci, D., Sullivan, T.J. and Calvi, G.M. (2011), "Displacement reduction factors for the design of medium and long period structures", J. Earthq. Eng., 13(S1), 1-29.
  22. Pozzati, P. (1980), Teoria e tecnica delle structuure, UTET, Torino.
  23. Priestley, M.J.N. (1993), "Myths and fallacies in earthquake engineering - conflicts between design and reality", Bull. NZ Natl. Soc. Earthq. Eng., 26(3), 329-341.
  24. Priestley, M.J.N. (1998), "Direct displacement-based design of buildings", Proceedings of the 11th European Conference on Earthquake Engineering, Paris, France.
  25. Priestley, M.J.N., Calvi, G.M. and Kowalsky, M.J. (2007), Displacement-Based Seismic Design of Structures, IUSS Press, Pavia.
  26. Rosman, R. (1967), "Laterally loaded systems consisting of walls and frames", Tall Build., 291-320.
  27. Rosman, R. (1974), "Stability and dynamics of shear-wall frame structures", Build. Sci., 9(1), 55-63. https://doi.org/10.1016/0007-3628(74)90040-1
  28. SIA 262 (2004), Building code, Swiss Society of Engineers and Architects (SIA): Concrete Structures, SIA, Zurich.
  29. Smith, B.S. and Coull, A. (1991), Tall building structures: analysis and design, John Wiley & Sons, Inc., New York.
  30. Sullivan, T.J., Priestley, M.J.N. and Calvi, G.M. (2005), "Development of an innovative seismic design procedure for frame-wall structure",k J. Earthq. Eng., 9(2), 279-307. https://doi.org/10.1142/S1363246905002407
  31. Sullivan, T.J., Priestley, M.J.N. and Calvi, G.M (2006), "Direct displacement-based design of frame-wall structures", J. Earthq. Eng., 10(1), 91-124.
  32. Sullivan, T.J., Priestley, M.J.N. and Calvi, G.M. (2012), A Model Code for the Displacement-Based Seismic Design of Structures, IUSS Press, Pavia.
  33. Tondelli, M. and Beyer, K. (2014), "Observations on out-of-plane behaviour of URM walls in buildings with RC slabs", Proceedings of the 9th International Masonry Conference, Guimaraes, Portugal.

피인용 문헌

  1. Optimization Approach to Uniformly Distributed Peak Interstory Drifts along Building Heights vol.145, pp.5, 2015, https://doi.org/10.1061/(asce)st.1943-541x.0002309
  2. Investigating the effects of span arrangements on DDBD-designed RC buildings under the skew seismic attack vol.77, pp.1, 2021, https://doi.org/10.12989/sem.2021.77.1.115
  3. Developing a method for multi-modal shear-based pushover analysis vol.22, pp.2, 2021, https://doi.org/10.1007/s42107-020-00308-1