DOI QR코드

DOI QR Code

Modeling unmanned aerial vehicle jet ignition wankel engines with CAE/CFD

  • Boretti, Albert (Department of Mechanical and Aerospace Engineering (MAE), Benjamin M. Statler College of Engineering and Mineral Resources, West Virginia University (WVU))
  • 투고 : 2015.03.04
  • 심사 : 2015.04.08
  • 발행 : 2015.10.25

초록

The paper presents some details of the CFD modeling of a novel design where jet ignition devices replace the traditional spark plugs for a faster and more complete combustion. The numerical simulations show how the pre-chamber jet ignition in a Wankel engine differs from reciprocating piston engine applications. The jets issuing from the jet ignition pre-chamber have many different speeds in the different directions as the pressure build-up at the trailing edge of the rotating chamber makes extremely fast the ignition of the chamber mixture in the direction of rotation. Conversely it prevents the jet ignition in the opposite direction. Careful positioning along the periphery and design of the connecting pipes and the prechamber volume with the help of CFD simulations permits to achieve extremely fast and complete combustion as impossible with spark plugs. The paper proposes results of CFD simulations of the combustion evolution within a jet ignited Wankel engine rotor, detailing challenges and opportunities of the application, as well as a first assessment of the impact the faster and more complete combustion permitted by jet ignition may have on the performances of Wankel engines for unmanned aerial vehicles applications.

키워드

참고문헌

  1. Boretti, A. A., Lisbona, M. G. and Nebuloni, P. (1991a), "Numerical modelling of three-dimensional flows within the cylinder of a 4 valve spark ignition engine", INRIA/SIAM Fourth International Conference on Numerical Combustion, St. Petersburg Beach, Florida, USA, December.
  2. Boretti, A. A., Lisbona, M. G. and Nebuloni, P. (1991b), "Numerical modelling of three-dimensional flows within the cylinder of a direct injection diesel engine", INRIA/SIAM Fourth International Conference on Numerical Combustion, St. Petersburg Beach, Florida, USA, December.
  3. Boretti, A., Lisbona, M. G., Nebuloni, P. and Bland, R. (1992a), "Spark-ignition engine combustion chamber design with three-dimensional flow computations", ATA Third International Conference Innovation and Reliability in Automotive Design and Testing, Florence, Italy, April.
  4. Boretti, A. et al. (1992b), "Diesel engine combustion chamber design with three dimensional flow computations", IMechE Conference on Combustion in Engines, London, UK, December.
  5. Boretti, A., Brear, M. and Watson, H. (2007), "Experimental and numerical study of a hydrogen fuelled I. C. engine fitted with the hydrogen assisted jet Ignition system", Proceedings of the Sixteenth Australasian Fluid Mechanics Conference, Gold Coast, Australia, December
  6. Boretti, A. A. and Watson, H. C. (2009a), "Enhanced combustion by jet ignition in a turbocharged cryogenic port fuel injected hydrogen engine", Int. J. Hydro. Energy, 34(5), 2511-2516. https://doi.org/10.1016/j.ijhydene.2008.12.089
  7. Boretti, A. A. and Watson, H. C. (2009b), "The lean burn direct injection jet ignition gas engine", Int. J. Hydro. Energy, 34(18), 7835-7841. https://doi.org/10.1016/j.ijhydene.2009.07.022
  8. Boretti, A. (2010a), "Comparison of fuel economies of high efficiency diesel and hydrogen engines powering a compact car with a flywheel based kinetic energy recovery systems", Int. J. Hydro. Energy, 35(16), 8417-8424. https://doi.org/10.1016/j.ijhydene.2010.05.031
  9. Boretti A. (2010b), "Modelling auto ignition of hydrogen in a jet ignition pre-chamber", Int. J. Hydro. Energy, 35(8), 3881-3890. https://doi.org/10.1016/j.ijhydene.2010.01.114
  10. Boretti, A., Watson, H. and Tempia, A. (2010), "Computational analysis of the lean-burn direct-injection jet ignition hydrogen engine", Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 224(2), 261-269. https://doi.org/10.1243/09544070JAUTO1278
  11. Boretti, A. (2011a), "Stoichiometric H2ICEs with water injection", Int. J. Hydro. Energy, 36(7), 4469-4473. https://doi.org/10.1016/j.ijhydene.2010.11.117
  12. Boretti, A. (2011b), "Stoichiometric H2ICE with water injection and exhaust and coolant heat recovery through organic Rankine cycles", Int. J. Hydro. Energy, 36(19), 12591-12600. https://doi.org/10.1016/j.ijhydene.2011.06.124
  13. Boretti, A., Jiang, S. and Scalzo, J. (2015), "A novel Wankel engine featuring jet ignition and port or direct injection for faster and more complete combustion especially designedfor gaseous fuels", SAE P. 2015-01-0007.
  14. Danieli, G., Ferguson, C., Heywood, J. and Keck, J. (1974), "Predicting the emissions and performance characteristics of a Wankel engine", SAE P. 740186.
  15. Heyne, S., Millot, G. and Favrat, D. (2011), "Numerical simulations of a prechamber autoignition engine operating on natural gas", Int. J. Thermodyn., 14(2), 43-50.
  16. Izweik, H. T. (2009), "CFD investigation of mixture formation, flow and combustion for multi-fuel rotary engine", d-nb. info/1001122860/34.
  17. Jones, C. (1979), "A review of curtiss-wright rotary engine developments with respect to general aviation potential", SAE P. 790621.
  18. Lehtiniemi, H. (2007), "Efficient engine CFD with detailed chemistry", ERC 2007 Symposium Future Fuels for IC Engines, Madison, June.
  19. Ohkubo, M., Tashima, S., Shimizu, R., Fuse, S. and Ebino, H. (2004), "Developed technologies of the new rotary engine (RENESIS)", No. 2004-01-1790, SAE Technical Paper.
  20. Roethlisberger, R. P. and Favrat, D. (2002a), "Comparison between direct and indirect (prechamber) spark ignition in the case of a cogeneration natural gas engine, part I: engine geometrical parameters", Appl. Therm. Eng., 22(11), 1217-1229. https://doi.org/10.1016/S1359-4311(02)00040-6
  21. Roethlisberger, R. P. and Favrat, D. (2002b), "Comparison between direct and indirect (prechamber) spark ignition in the case of a cogeneration natural gas engine, part II: engine operating parameters and turbocharger characteristics", Appl. Therm. Eng., 22(11), 1231-1243. https://doi.org/10.1016/S1359-4311(02)00041-8
  22. Sherman, D. (2008), "The rotary club", Autom. Mag., February, 76-79.
  23. Shimizu, R., Okimoto, H., Tashima, S. and Fuse, S. (1995), "The characteristics of fuel consumption and exhaust emissions of the side exhaust port rotary engine", SAE P. 950454.
  24. Yamamoto, K., Muroki, T. and Kobayakawa, T. (1972), "Combustion characteristics of rotary engines", SAE P. 720357.
  25. www.altronicinc.com/pdf/ignitionaccessories/PPCSP6-12.pdf
  26. www.cd-adapco.com/products/star-ccm-plus
  27. www.cd-adapco.com/sites/default/files/brochure/pdf/8017.pdf
  28. www.cd-adapco.com/sites/default/files/Presentation/DARS.pdf
  29. www.gtisoft.com/
  30. www.mazda.com/stories/rotary/hre/about
  31. www.rotronuav.com/engines
  32. www.cd-adapco.com/ja/printpdf/5946

피인용 문헌

  1. Modelling of flame propagation in the gasoline fuelled Wankel rotary engine with hydrogen additives vol.177, 2017, https://doi.org/10.1088/1757-899X/177/1/012076
  2. First tests of laser ignition in Wankel engine vol.1787, pp.1, 2015, https://doi.org/10.1088/1742-6596/1787/1/012031
  3. Use of phased supply of hydrogen additives for improvement of the ecological characteristics of the Wankel rotary engine vol.1155, pp.1, 2015, https://doi.org/10.1088/1757-899x/1155/1/012077