References
- ASTM D7181 (2011), "Standard Test Method for Consolidated Drained Triaxial Compression Test for Soils", West Conshohocken, PA: ASTM International.
- Bolton, M.D. (1986), "The Strength and Dilatancy of Sands", Geotechnique, Vol.36, No.1, pp.65-78. https://doi.org/10.1680/geot.1986.36.1.65
- Bryan, G. and Stoll, R. (1988), "The Dynamic Shear Modulus of Marine Sediments", The Journal of the Acoustical Society of America, Vol.83, No.6, pp.2159-2164. https://doi.org/10.1121/1.396343
- Cha, M. and Cho, G.-C. (2007), "Shear Strength Estimation of Sandy Soils Using Shear Wave Velocity", ASTM geotechnical testing journal, Vol.30, No.6, pp.484-495.
- Chiang, Y.-C. and Chae, Y.S. (1972), Dynamic properties of cementtreated soils, Hwy. Res. Rec., Washington, D.C.
- Cresswell, A., Barton, M.E., and Brown, R. (1999), "Determining the Maximum Density of Sands by Pluviation", ASTM geotechnical testing journal, Vol.22, No.4, pp.324-328. https://doi.org/10.1520/GTJ11245J
- Cunning, J., Robertson, P., and Sego, D. (1995), "Shear Wave Velocity to Evaluate in Situ State of Cohesionless Soils", Canadian Geotechnical Journal, Vol.32, No.5, pp.848-858. https://doi.org/10.1139/t95-081
- Frost, J. and Park, J.-Y. (2003), "A Critical Assessment of the Moist Tamping Technique", ASTM geotechnical testing journal, Vol.26, No.1, pp.57-70.
- Guadalupe, Y., Baxter, C.D., and Sharma, M.S.R. (2013), "Measuring Shear Wave Velocity in Laboratory to Link Small-and Large-Strain Behavior of Soils", Transportation Research Record: Journal of the Transportation Research Board, Vol.2335, No.1, pp.79-88. https://doi.org/10.3141/2335-09
- Hardin, B. and Richart, J., FE (1963), "Elastic Wave Velocities in Granular Soils", Journal of Soil Mechanics & Foundations Div, Vol.89, No.Proc. Paper 3407.
- Hardin, B.O. and Drnevich, V.P. (1972), "Shear Modulus and Damping in Soils: Measurement and Parameter Effects", Journal of Soil Mechanics and Foundation Engineering Division, Vol.98, No.SM6, pp.603-624.
- Ladd, C.C. and Foott, R. (1974), "New Design Procedure for Stability of Soft Clays", Journal of the Geotechnical Engineering Division, Vol.100, No.Gt7, pp.763-786.
- Ladd, R. (1978), "Preparing Test Specimens Using Undercompaction", ASTM geotechnical testing journal, Vol.1, No.1, pp.16-23. https://doi.org/10.1520/GTJ10364J
- Lee, J.-S. and Santamarina, J.C. (2005), "Bender Elements: Performance and Signal Interpretation", Journal of geotechnical and geoenvironmental engineering, Vol.131, No.9, pp.1063-1070. https://doi.org/10.1061/(ASCE)1090-0241(2005)131:9(1063)
- Lee, J.-S. and Yoon, H.-K. (2014), "Porosity Estimation Based on Seismic Wave Velocity at Shallow Depths", Journal of Applied Geophysics, Vol.105, pp.185-190. https://doi.org/10.1016/j.jappgeo.2014.03.018
- Richart Jr, F., Hall Jr, J., and Woods, R. (1970), "Vibration of Soils and Foundations": Prentice-Hall, Englewood Cliffs, New Jersey.
- Robertson, P., Sasitharan, S., Cunning, J., and Sego, D. (1995), "Shear-wave Velocity to Evaluate in-situ State of Ottawa Sand", Journal of Geotechnical Engineering, Vol.121, No.3, pp.262-273. https://doi.org/10.1061/(ASCE)0733-9410(1995)121:3(262)
- Roesler, S.K. (1979), "Anisotropic Shear Modulus due to Stress Anisotropy", Journal of the Geotechnical Engineering Division, Vol.105, No.7, pp.871-880.
- Santamarina, J.C., Klein, A., and Fam, M.A. (2001), "Soils and Waves: Particulate Materials behavior, Characterization and Process Monitoring", Journal of Soils and Sediments, Vol.1, No.2, pp.257.
- Saxena, S.K., Avramidis, A.S., and Reddy, K.R. (1988), "Dynamic Moduli and Damping Ratios for Cemented Sands at Low Strains", Canadian Geotechnical Journal, Vol.25, No.2, pp.353-368. https://doi.org/10.1139/t88-036
- Sharma, R., Baxter, C., and Jander, M. (2011), "Relationship between Shear Wave Velocity and Stresses at Failure for Weakly Cemented Sands during Drained Triaxial Compression", Soils and foundations, Vol.51, No.4, pp.761. https://doi.org/10.3208/sandf.51.761
- Skempton, A. (1954), "The Pore-pressure Coefficients A and B", Geotechnique, Vol.4, No.4, pp.143-147. https://doi.org/10.1680/geot.1954.4.4.143
- Vaid, Y. and Negussey, D. (1988), "Preparation of Reconstituted Sand Specimens", Advanced triaxial testing of soil and rock, ASTM STP, Vol.977, pp.405-417.
- Yoo, J.-K. and Park, D. (2014), "Evaluation of Characteristics of Shear Strength and Poisson's Ratiothrough Triaxial and Bender Element Tests", Journal of the Korean Geotechnical Society, Vol. 30, No.5, pp.67-75. https://doi.org/10.7843/KGS.2014.30.5.67
- Yoon, H.-K. and Lee, J.-S. (2010), "Field Velocity Resistivity Probe for Estimating Stiffness and Void Ratio", Soil Dynamics and Earthquake Engineering, Vol.30, No.12, pp.1540-1549. https://doi.org/10.1016/j.soildyn.2010.07.008
- Yoshimi, Y., Tokimatsu, J., and Ohara, A. (1994), "In Situ Liquefaction Resistance of Clean Sands Over a Wide Density Range", Geotechnique, Vol.44, No.3, pp.479-494. https://doi.org/10.1680/geot.1994.44.3.479