참고문헌
- A. L. Mbaruku and J. Schwartz, "Fatigue behavior of Y-Ba-Cu-O/hastelloy-C coated conductor at 77 K," IEEE Trans. Appl. Supercond., vol. 18, pp. 1743-1752, 2008. https://doi.org/10.1109/TASC.2008.2003491
- T. Takematsu et al., "Degradation of the performance of a YBCO-coated conductor double pancake coil due to epoxy impregnation," Physica C, vol. 470, pp. 674-677, 2010. https://doi.org/10.1016/j.physc.2010.06.009
- D. C. van der Laan, J. W. Ekin, C. C. Clickner, and T. C. Stauffer, "Delamination strength of YBCO coated conductors under transverse tensile stress," Supercond. Sci. Technol., vol. 20, pp. 765-770, 2007. https://doi.org/10.1088/0953-2048/20/8/007
- G. Majkic, E. Galstyan, Y. Zhang and V. Selvamanickam, "Investigation of delamination mechanisms in IBAD-MOCVD REBCO coated conductors," IEEE Trans. Appl. Supercond., vol. 23, pp. 6600205, 2013. https://doi.org/10.1109/TASC.2012.2237496
- H. S. Shin and A. Gorospe, "Characterization of transverse tensile stress response of critical current and delamination behavior in GdBCO coated conductor tapes by anvil test," Supercond. Sci. Technol., vol. 27, pp. 025001, 2014. https://doi.org/10.1088/0953-2048/27/2/025001
- N. Sakai, S. Lee, N. Chikumoto, T. Izumi, and K. Tanabe, "Delamination behavior of Gd123 coated conductor fabricated by PLD," Physica C, vol. 471, pp. 1075-1079, 2011. https://doi.org/10.1016/j.physc.2011.05.127
- Y. Yanagisawa et al., "Remarkable weakness against cleavage stress for YBCO-coated conductors and its effect on the YBCO coils performance," Physica C, vol. 471, pp. 480-485, 2011. https://doi.org/10.1016/j.physc.2011.05.003
- A. Gorospe, A. Nisay, and H. S. Shin, "Delamination behaviour in differently copper laminated REBCO coated conductor tapes under transverse loading," Physica C, vol. 504, pp. 49-52, 2014.
- H. S. Shin, A. Gorospe, Z. Bautista, and M. Dedicatoria, "Evaluation of electromechanical properties in GdBCO coated conductor tapes under cyclic loading and bending," Supercond. Sci. Technol., submitted for publication.
- E. Barbero, J. Fernandez-Saez, and C. Navarro, "Statistical analysis of the mechanical properties of composite materials," Composites: Part B: Engineering, vol. 31, pp. 375-381, 2000. https://doi.org/10.1016/S1359-8368(00)00027-5
- M. H. Dirikolua, A. Aktas, and B. Birgoren, "Statistical analysis of fracture strength of composite materials uwing Weibull distribution," Turkish J. Eng. Env. Sci., vol. 26, pp. 45-48, 2000.
- R. V. Curtis and A. S. Juszczyk, "Analysis of strength data using two-and-three-parameter Weibull models," J. Mater. Sci., vol. 33, pp. 1151-1157, 1998.
- A. J. Hallinan Jr., "A review of the Weibull distribution," J. Qual. Technol., vol. 25, pp. 85-93, 1993.
- S. Ochiai et al., "Applicability of Weibull distribution of distributed normalized critical current of bent-damaged Bi2223 composite tape," Mater. Trans., vol. 51, pp. 1663-1670, 2010. https://doi.org/10.2320/matertrans.MAW201001
- J. R. Dizon, A. Gorospe, and H. S. Shin, "Numerical analysis of stress distribution in Cu-stabilized GdBCO CC tapes during anvil tests for the evaluation of transverse delamination strength," Supercond. Sci. Technol., vol. 27, pp. 055023, 2014. https://doi.org/10.1088/0953-2048/27/5/055023
피인용 문헌
- Investigation on quench initiation and propagation characteristics of GdBCO coil co-wound with a stainless steel tape as turn-to-turn metallic insulation vol.87, pp.11, 2016, https://doi.org/10.1063/1.4966676
- Evaluation of delamination characteristics in GdBCO CC tapes under transverse load using anvil test methods for various anvil contact configurations at 77 K vol.32, pp.10, 2019, https://doi.org/10.1088/1361-6668/ab3151