참고문헌
- Kwak, T. S. Ohmori, H. and Bae, W. B., 2004,"A Study on Searching Method of Molding Condition to Control the Thickness Reduction of Optical Lens in Plastic Injection Molding Process," J. Kor. Soc. Precis. Eng., Vol. 21, No. 2, pp. 27-34.
- Ha, T. H., Jo, H. H., Song, J. and Jeon, J., 2014, "Mold Technology for Precision Injection Lens," J. Kor. Soc. Precis. Eng., Vol. 31, No. 7, pp. 561-567. https://doi.org/10.7736/KSPE.2014.31.7.561
- Pazos, M., Baselga, J. and Bravo, J., 2003, "Limiting Thickness Estimation in Polycarbonate Lenses Injection Using CAE Tools," J. Mater. Process. Technol., Vol. 143-144, pp. 438-441. https://doi.org/10.1016/S0924-0136(03)00425-4
- Lee, H. S., Jeon, W. T. and Kim, S. W., 2012, "Development of Plastic Lenses for High-Resolution Phone Camera by Injection-Compression Molding," Trans. Korean Soc. Mech. Eng. A, Vol. 37, No. 1, pp. 39-46 https://doi.org/10.3795/KSME-A.2013.37.1.039
- Yoshii, M., Kuramoto, H., Kawana, T. and Kato, K., 1996, "The Observation and Origin of Micro Flow Marks in the Precision Injection Molding of Poly-Carbonate," Polym. Eng. Sci., Vol. 36, No. 6, pp. 819-826. https://doi.org/10.1002/pen.10469
- Park, K., 2013, "Investigation of Flow Marks in the Injection Molding of Thin Lenses," Samsung Electro-Mechanics Technical Report.
- Park, K. and Joo, W., 2008, "Numerical Evaluation of a Plastic Lens by Coupling Injection Molding Analysis with Optical Simulation," Japan. J. Appl. Phy., Vol. 47, No. 11, pp. 8402-8407. https://doi.org/10.1143/JJAP.47.8402
- Tsai, K. M. and Tang, B. H., 2014. "Determination of Injection Molding Process Window Based on form Accuracy of Lens Using Response Surface Methodology," Int. J. Adv. Manuf. Technol., Vol. 75, pp. 947-958. https://doi.org/10.1007/s00170-014-6185-9
- Gim, J. S., Tae, J. S., Jeon, J. H., Choi, J. H. and Rhee, B. O., 2015, "Detection Method of Filling Imbalance in a Multi-Cavity Mold for Small Lens," Int. J. Precis. Eng. Manuf., Vol. 16, No. 3, pp. 531-535. https://doi.org/10.1007/s12541-015-0072-7
- Yamanoi, M., Kwark, T.S. and Jung, J. K., 2012, "Application of Birefringence CAE in Mould Design of Optic Lens Injection Molding Process," J. Kor. Soc. Manuf. Process Eng., Vol. 11, No. 11, pp. 1-6.
- Kim, J. M. and Lyu, M. Y., 2006, "An Application of CAE in the Optimization of Runner size in Injection Molding," Trans. Mater. Process., Vol. 15, No. 5, pp. 347-353. https://doi.org/10.5228/KSPP.2006.15.5.347
- Tsai, K. M., 2013, "Runner Design to Improve Quality of Plastic Optical Lens," Int. J. Adv. Manuf. Technol., Vol. 66, pp. 523-536. https://doi.org/10.1007/s00170-012-4346-2
- Sohn, D. H. and Park, K., 2013, "Investigation of Cooling Performance of Injection Molds Using Pulsed Mold Temperature Control," Trans. Korean Soc. Mech. Eng. B, Vol. 37, No.1, pp. 35-41. https://doi.org/10.3795/KSME-B.2013.37.1.035
피인용 문헌
- Three-Dimensional Thermoforming Analysis of an Inner Case with Three Cavities for Refrigerator vol.40, pp.5, 2016, https://doi.org/10.3795/KSME-A.2016.40.5.505