DOI QR코드

DOI QR Code

Retrofitting of vulnerable RC structures by base isolation technique

  • Islam, A.B.M. Saiful (Department of Civil Engineering, University of Malaya) ;
  • Jumaat, Mohd Zamin (Department of Civil Engineering, University of Malaya) ;
  • Ahmmad, Rasel (Department of Civil Engineering, University of Malaya) ;
  • Darain, Kh. Mahfuz ud (Department of Civil Engineering, University of Malaya)
  • 투고 : 2013.10.09
  • 심사 : 2015.04.06
  • 발행 : 2015.09.25

초록

The scale and nature of the recent earthquakes in the world and the related earthquake disaster index coerce the concerned community to become anxious about it. Therefore, it is crucial that seismic lateral load effect will be appropriately considered in structural design. Application of seismic isolation system stands as a consistent alternative against this hazard. The objective of the study is to evaluate the structural and economic feasibility of reinforced concrete (RC) buildings with base isolation located in medium risk seismic region. Linear and nonlinear dynamic analyses as well as linear static analysis under site-specific bi-directional seismic excitation have been carried out for both fixed based (FB) and base isolated (BI) buildings in the present study. The superstructure and base of buildings are modeled in a 3D finite element model by consistent mass approach having six degrees of freedom at each node. The floor slabs are simulated as rigid diaphragms. Lead rubber bearing (LRB) and High damping rubber bearing (HDRB) are used as isolation device. Change of structural behaviors and savings in construction costing are evaluated. The study shows that for low to medium rise buildings, isolators can reduce muscular amount of base shears, base moments and floor accelerations for building at soft to medium stiff soil. Allowable higher horizontal displacement induces structural flexibility. Though incorporating isolator increases the outlay, overall structural cost may be reduced. The application of base isolation system confirms a potential to be used as a viable solution in economic building design.

키워드

과제정보

연구 과제 주관 기관 : University of Malaya (UM), Bangladesh Earthquake Society

참고문헌

  1. Ariga, T., Kanno, Y. and Takewaki, I. (2006), "Resonant behaviour of base-isolated high-rise buildings under long-period ground motions", Struct. Des. Tall Spec. Build., 15(3), 325-338. https://doi.org/10.1002/tal.298
  2. Bhuiyan, A.R., Okui, Y., Mitamura, H. and Imai, T. (2009), "A rheology model of high damping rubber bearings for seismic analysis: Identification of nonlinear viscosity", Int. J. Solid. Struct., 46(7-8), 1778-1792. https://doi.org/10.1016/j.ijsolstr.2009.01.005
  3. BNBC. (1993), Bangladesh National Building Code, Bangladesh: Housing and Building Research Institute, Bangladesh Standard and Testing Institute.
  4. Borzi, B., Vona, M., Masi, A., Pinho, R. and Pola, D. (2013), "Seismic demand estimation of RC frame buildings based on simplified and nonlinear dynamic analyses", Earthq. Struct., 4(2), 157-179. https://doi.org/10.12989/eas.2013.4.2.157
  5. Casciati, F. and Hamdaoui, K. (2008), "Modelling the uncertainty in the response of a base isolator", Prob. Eng. Mech., 23(4), 427-437. https://doi.org/10.1016/j.probengmech.2007.10.014
  6. CSI. (2004), Linear and nonlinear static and dynamic analysis of three-dimensional structures, In Computer & Structures Inc. SAP 2000 (Ed.), Berkeley, CA.
  7. Dall'Asta, A. and Ragni, L. (2006), "Experimental tests and analytical model of high damping rubber dissipating devices", Eng. Struct., 28(13), 1874-1884. https://doi.org/10.1016/j.engstruct.2006.03.025
  8. Dall'Asta, A. and Ragni, L. (2008), "Nonlinear behavior of dynamic systems with high damping rubber devices", Eng. Struct., 30(12), 3610-3618. https://doi.org/10.1016/j.engstruct.2008.06.003
  9. Deb, S. (2004), "Seismic base isolation-an overview", Curr. Sci., 87(10), 1426-1430.
  10. Dicleli, M. and Buddaram, S. (2007), "Comprehensive evaluation of equivalent linear analysis method for seismic-isolated structures represented by sdof systems", Eng. Struct., 29(8), 1653-1663. https://doi.org/10.1016/j.engstruct.2006.09.013
  11. Eleftheriadou, A.K. and Karabinis, A.I. (2012), "Seismic vulnerability assessment of buildings based on damage data after a near field earthquake (7 September 1999 Athens - Greece)", Earthq. Struct., 3(2), 117-140. https://doi.org/10.12989/eas.2012.3.2.117
  12. Habibullah, A. (2005), Static and Dynamic Finite Element Analysis of Structures, SAP 2000, Computers and Structures Inc. Berkeley, California.
  13. HCG. (2009), Structural and Civil Engineers, Holmes Consulting Group Ltd., Auckland, Newzealand.
  14. Hong, W. and Kim, H. (2004), "Performance of a multi-story structure with a resilient-friction base isolation system", Comput. Struct., 82(27), 2271-2283. https://doi.org/10.1016/j.compstruc.2004.06.002
  15. Islam, A.B.M.S., Ahmad, S.I., Jameel, M. and Zamin, M.J. (2012a), "Seismic base isolation for buildings in regions of low to moderate seismicity: Practical alternative design", Practice Period. Struct. Des. Constr., 17(1), 13-20. https://doi.org/10.1061/(ASCE)SC.1943-5576.0000093
  16. Islam, A.B.M.S., Ahmad, S.I., Jumaat, M.Z., Hussain, R.R., Rahman, M.A. and Darain, K.M. (2014a), "Efficient design in building construction with rubber bearing in medium risk seismicity: case study and assessment", J. Civ. Eng. Management, 20(5), 621-631. https://doi.org/10.3846/13923730.2013.801910
  17. Islam, A.B.M.S., Hussain, R.R., Jameel, M. and Jumaat, M.Z. (2012b), "Non-linear time domain analysis of base isolated multi-storey building under site specific bi-directional seismic loading", Auto. Constr., 22, 554-566. https://doi.org/10.1016/j.autcon.2011.11.017
  18. Islam, A.B.M.S., Hussain, R.R., Jumaat, M.Z. and Darain, K.M. (2014b), "Implication of rubber-steel bearing nonlinear models on soft storey structures", Comput. Concrete, 13(5), 603-619. https://doi.org/10.12989/cac.2014.13.5.603
  19. Islam, A.B.M.S., Hussain, R.R., Jumaat, M.Z. and Rahman, M.A. (2013a), "Nonlinear dynamically automated excursions for rubber-steel bearing isolation in multi-storey construction", Auto. Constr., 30, 265-275. https://doi.org/10.1016/j.autcon.2012.11.010
  20. Islam, A.B.M.S., Jameel, M., Uddin, M.A. and Ahmad, S.I. (2011), "Simplified design guidelines for seismic base isolation in multi-storey buildings for Bangladesh National Building Code (BNBC)", Int. J. Phys. Sci., 6(23), 5467-5486.
  21. Islam, A.B.M.S., Jumaat, M.Z., Hussain, R. and Alam, M.A. (2013b), "Incorporation of rubber-steel bearing isolation in multi-storey building", J. Civ. Eng. Management, 19(sup1), S33-S49. https://doi.org/10.3846/13923730.2013.801904
  22. Ismail, M., Rodellar, J. and Ikhouane, F. (2010), "An innovative isolation device for aseismic design", Eng. Struct., 32(4), 1168-1183. https://doi.org/10.1016/j.engstruct.2009.12.043
  23. Jangid, R.S. (2007), "Optimum lead-rubber isolation bearings for near-fault motions", Eng. Struct., 29(10), 2503-2513. https://doi.org/10.1016/j.engstruct.2006.12.010
  24. Kampas, G. and Makris, N. (2012), "Time and frequency domain identification of seismically isolated structures: advantages and limitations", Earthq. Struct., 3(3-4), 249-270. https://doi.org/10.12989/eas.2012.3.3_4.249
  25. Kelly, T.E. (2001), Base isolation of structures: design guidelines, Holmes Consulting Group Ltd.
  26. Kelly, T.E., Robinson, W.H. and Skinner, R.I. (2006), Seismic Isolation for Designers and Structural Engineers, Robinson seismic Ltd.
  27. Lu, L.Y. and Lin, G.L. (2008), "Predictive control of smart isolation system for precision equipment subjected to near-fault earthquakes", Eng. Struct., 30(11), 3045-3064. https://doi.org/10.1016/j.engstruct.2008.04.016
  28. Matsagar, V.A. and Jangid, R.S. (2004), "Influence of isolator characteristics on the response of base-isolated structures", Eng. Struct., 26(12), 1735-1749. https://doi.org/10.1016/j.engstruct.2004.06.011
  29. Naeim, F. and Kelly, J. (1999), Design of seismic isolated structures: from theory to practice, Wiley.
  30. Olsen, A., Aagaard, B. and Heaton, T. (2008), "Long-period building response to earthquakes in the San Francisco Bay Area", Bull. Seismol. Soc. Am., 98(2), 1047. https://doi.org/10.1785/0120060408
  31. Ozmen, H.B., Inel, M. and Cayci, B.T. (2013), "Engineering implications of the RC building damages after 2011 Van Earthquakes", Earthq. Struct., 5(3), 297-319. https://doi.org/10.12989/eas.2013.5.3.297
  32. Pocanschi, A. and Phocas, M.C. (2007), "Earthquake isolator with progressive nonlinear deformability", Eng. Struct., 29(10), 2586-2592. https://doi.org/10.1016/j.engstruct.2006.12.016
  33. Polycarpou, P.C. and Komodromos, P. (2010), "Earthquake-induced poundings of a seismically isolated building with adjacent structures", Eng. Struct., 32(7), 1937-1951. https://doi.org/10.1016/j.engstruct.2010.03.011
  34. Pourzeynali, S. and Zarif, M. (2008), "Multi-objective optimization of seismically isolated high-rise building structures using genetic algorithms", J. Sound Vib., 311(3-5), 1141-1160. https://doi.org/10.1016/j.jsv.2007.10.008
  35. Providakis, C.P. (2008), "Effect of LRB isolators and supplemental viscous dampers on seismic isolated buildings under near-fault excitations", Eng. Struct., 30(5), 1187-1198. https://doi.org/10.1016/j.engstruct.2007.07.020
  36. Roussis, P.C. and Constantinou, M.C. (2006), "Uplift-restraining Friction Pendulum seismic isolation system", Earthq. Eng. Struct. Dyn., 35(5), 577- 593. https://doi.org/10.1002/eqe.545
  37. Spyrakos, C.C., Koutromanos, I.A. and Maniatakis, C.A. (2009), "Seismic response of base-isolated buildings including soil-structure interaction", Soil Dyn. Earthq. Eng., 29(4), 658-668. https://doi.org/10.1016/j.soildyn.2008.07.002
  38. Takewaki, I. (2008), "Robustness of base-isolated high-rise buildings under code-specified ground motions", Struct. Des. Tall Spec. Build., 17(2), 257 -271. https://doi.org/10.1002/tal.350
  39. Takewaki, I. and Fujita, K. (2009), "Earthquake input energy to tall and base-isolated buildings in time and frequency dual domains", Struct. Des. Tall Spec. Build., 18(6), 589-606. https://doi.org/10.1002/tal.497
  40. Tornello, M.E. and Sarrazin, M. (2012), "Base-isolated building with high-damping spring system subjected to near fault earthquakes", Earthq. Struct., 3(3-4), 315-340. https://doi.org/10.12989/eas.2012.3.3_4.315
  41. UBC. (1997), Uniform Building Code, Earthquake regulations for seismic isolated structures, Paper presented at the International conference of building officials, Whitter, CA, USA.
  42. Wilkinson, S. and Hiley, R. (2006), "A non-linear response history model for the seismic analysis of high-rise framed buildings", Comput. Struct., 84(5-6), 318-329. https://doi.org/10.1016/j.compstruc.2005.09.021
  43. Wilson, E. (2002), Three-dimensional static and dynamic analysis of structures (3rd ed.), Computers and Structures Inc. Berkeley, California.
  44. Yon, B., Sayln, E. and S.Koksal, T. (2013), "Seismic response of buildings during the May 19, 2011 Simav, Turkey earthquake", Earthq. Struct., 5(3), 343-357. https://doi.org/10.12989/eas.2013.5.3.343

피인용 문헌

  1. Base Isolation for Seismic Retrofitting of a Multiple Building Structure: Design, Construction, and Assessment vol.2017, 2017, https://doi.org/10.1155/2017/4645834
  2. The effect of base isolation and tuned mass dampers on the seismic response of RC high-rise buildings considering soil-structure interaction vol.17, pp.4, 2015, https://doi.org/10.12989/eas.2019.17.4.425