Journal of Welding and Joining

The Korean Welding and Joining Society (대한용접접합학회)
권호 표지
DOI QR코드

DOI QR Code

Development of New Low Frequency ECT Sensor to Detect Inner Defects(II) - Application to Welding Specimens Included Defects -

내부결함 검출 가능한 저주파 ECT 센서개발(II) - 결함을 가진 소형 용접시험편에 적용 -

  • Received : 2015.08.17
  • Accepted : 2015.08.22
  • Published : 2015.08.31
Download PDF
⟨ Previous Next ⟩

Abstract

Non-destructive techniques are used widely in the metal industry in order to control the quality of materials. Eddy current testing(ECT) is one of the most extensively used non-destructive techniques for inspecting electrically conductive materials at very high speeds that does not require any contact between the test piece and the sensor. The New ECT sensor which can detect inner defects was developed regardless the condition of surface. This sensor is verified to do experiment which measure the loss of induced electromotive force. The loss of induced electromotive force was measured in 5.4% and this low frequency ECT device can detect internal defects at depth 20 mm.

Keywords

References

  1. Ik Gun Park : Nondestructive evaluation of spot weld quality using by ultrasonic measurement, Journal of KWS, 12 (3) (1994), 402-410 (In Korean)
  2. G. P. Singh. R. A. Cervantes and R. L. Spinks, Ultrasonic Nondestructive Testing Technique for the Examination of Low-Pressure Turbine dics Rims, SWRI, (1985), 398-401.
  3. ASTM B637, Standard Specification for Precipitation-Hardening Nickel Alloy Bars, Forgings, and Forging Stock for High-Temperature Service, (1993), 276-278.
  4. Donald J, Hangemaier: Fundamentals of Eddy Current Testing, ASNT, (1990),43.
  5. ASNT, Nondestructive Testing Handbook 2nd. Edition . Electromagnetic Testing, .4 (1986), 382
  6. ASM, Metal Handbook, 8th ed., Vol 2 (1964), 398-405.
  7. Ahn, Y. S., Geong, G. J.: New Eddy Current Technology Development in Power Plant, (2004), 110-122.
  8. Ahn, Y. S., Gil, D. S.: Nondestructive Technology Development in 7FA Type Gas Turbine, (2008), 214-228.
  9. Ahn, Y. S., Park, S. G., Nondestructive Technology Development in Westing House Gas Turbine Rotor, (2010), 210-213.