DOI QR코드

DOI QR Code

Viscous fluid induced vibration and instability of FG-CNT-reinforced cylindrical shells integrated with piezoelectric layers

  • 투고 : 2014.11.11
  • 심사 : 2015.03.04
  • 발행 : 2015.09.25

초록

In this paper, viscous fluid induced nonlinear free vibration and instability analysis of a functionally graded carbon nanotube-reinforced composite (CNTRC) cylindrical shell integrated with two uniformly distributed piezoelectric layers on the top and bottom surfaces of the cylindrical shell are presented. Single-walled carbon nanotubes (SWCNTs) are selected as reinforcement and effective material properties of FG-CNTRC cylindrical shell are assumed to be graded through the thickness direction and are estimated through the rule of mixture. The elastic foundation is modeled by temperature-dependent orthotropic Pasternak medium. Considering coupling of mechanical and electrical fields, Mindlin shell theory and Hamilton's principle, the motion equations are derived. Nonlinear frequency and critical fluid velocity of sandwich structure are calculated based on differential quadrature method (DQM). The effects of different parameters such as distribution type of SWCNTs, volume fractions of SWCNTs, elastic medium and temperature gradient are discussed on the vibration and instability behavior of the sandwich structure. Results indicate that considering elastic foundation increases frequency and critical fluid velocity of system.

키워드

과제정보

연구 과제 주관 기관 : University of Kashan

참고문헌

  1. Benrahou, W.T.K.H., Houari, M.S.A. and Tounsi, A. (2015), "Thermal buckling analysis of FG plates resting on elastic foundation based on an efficient and simple trigonometric shear deformation theory", Steel Compos. Struct., Int. J., 18(2), 443-465. https://doi.org/10.12989/scs.2015.18.2.443
  2. Cao, L., Mantell, S. and Polla, D. (2001), "Design and simulation of an implantable medical drug delivery system using microelectromechanical systems technology", Sens. Act. A, 94(1-2), 117-125. https://doi.org/10.1016/S0924-4247(01)00680-X
  3. Chee, C.Y.K., Tong, L. and Steve, G.P. (1998), "A review on the modeling of piezoelectric sensors and actuators incorporated in intelligent structures", J. Intel. Mat. Sys. Struct., 9(1), 3-19. https://doi.org/10.1177/1045389X9800900101
  4. Chen, X., Fox, C.H.J. and McWilliam, S. (2004), "Optimization of a cantilever microswitch with piezoelectric actuation", J. Intel. Mat. Sys. Struct., 15(11), 823-834. https://doi.org/10.1177/1045389X04044128
  5. Chen, W.Q., Jin, P.J. and Kang, Y.L. (2006), "Static and dynamic behavior of simply-supported cross-ply laminated piezoelectric cylindrical panels with imperfect bonding", Compos. Struct., 74(3), 265-276. https://doi.org/10.1016/j.compstruct.2005.04.011
  6. Clark, R.L. and Fuller, C.R. (1991), "Active control of structurally radiated sound from an enclosed finite cylinder", Proceedings of the Conference on Recent Advances in Active Control of Sound and Vibration, Virginia Polytechnic Institute and State University, Blacksburg, VA, USA, July.
  7. Esawi, A.M.K. and Farag, M.M. (2007), "Carbon nanotube reinforced composites: potential and current challenges", Mat. Des., 28(9), 2394-2401. https://doi.org/10.1016/j.matdes.2006.09.022
  8. Dong, S., Du, X., Bouchilloux, P. and Uchino, K. (2002), "Piezoelectric ring-morph actuation for valve application", J. Electrocer., 8(2), 155-161. https://doi.org/10.1023/A:1020560114319
  9. D'Ottavio, M., Ballhause, D., Kroplin, B. and Carrera, E. (2006), "Closed-form solutions for the free-vibration problem of multilayered piezoelectric shells", Comput. Struct., 84(22-23), 1506-1518. https://doi.org/10.1016/j.compstruc.2006.01.030
  10. Ghorbanpour Arani, A., Vossough, H., Kolahchi, R. and Mosallaie Barzoki, A.A. (2012), "Electro-thermo nonlocal nonlinear vibration in an embedded polymeric piezoelectric micro plate reinforced by DWBNNTs using DQM", J. Mech. Sci. Tech., 26(10), 3047-3057. https://doi.org/10.1007/s12206-012-0816-6
  11. Ghorbanpour Arani, A., Kolahchi, R. and Khoddami Maraghi, Z. (2013), "Nonlinear vibration and instability of embedded double-walled boron nitride nanotubes based on nonlocal cylindrical shell theory", Appl. Math. Model., 37(14-15), 7685-7707. https://doi.org/10.1016/j.apm.2013.03.020
  12. Ghorbanpour Arani, A., Abdollahian, M. and Kolahchi, R. (2015), "Nonlinear vibration of embedded smart composite microtube conveying fluid based on modified couple stress theory", Polym. Compos., 36(7), 1314-1324. DOI: 10.1002/pc.23036.
  13. Kutlu, A. and Omurtag, M.H. (2012), "Large deflection bending analysis of elliptic plates on orthotropic elastic foundation with mixed finite element method", Int. J. Mech. Sci., 65(1), 64-74. https://doi.org/10.1016/j.ijmecsci.2012.09.004
  14. Lester, H.C. and Lefebvre, S. (1991), "Piezoelectric actuator models for active sound and vibration control of cylinders", Proceedings of the Conferenceon Recent Advances in Active Control of Sound and Vibration, Virginia Polytechnic Institute and State University, Blacksburg, VA, USA, July.
  15. Li, H., Lin, Q., Liu, Z. and Wang, C. (2001), "Free vibration of piezoelastic laminated cylindrical shells under hydrostatic pressure", Int. J. Solids Struct., 38(42-43), 7571-7585. https://doi.org/10.1016/S0020-7683(01)00008-7
  16. Lin, S. (2004), "Study on the equivalent circuit and coupled vibration for the longitudinally polarized piezoelectric ceramic hollow cylinders", J. Sound Vib., 275(3-5), 859-875. https://doi.org/10.1016/j.jsv.2003.07.030
  17. Lu, P., Lee, K.H., Lin, W.Z. and Lim, S.P. (2001), "An approximate frequency formula for piezoelectric circular cylindrical shells", J. Sound Vib., 242(2), 309-320. https://doi.org/10.1006/jsvi.2000.3350
  18. Moon, K., Seok, H. and Moonsan, J. (2009), "Dynamic modeling and active vibration controller design for a cylindrical shell equipped with piezoelectric sensors and actuators", J. Sound Vib., 321(3-5), 510-524. https://doi.org/10.1016/j.jsv.2008.09.051
  19. Najafov, A.M., Sofiyev, A.H., Hui, D., Karaca, Z., Kalpakci, V. and Ozcelik, M. (2014), "Stability of EG cylindrical shells with shear stresses on a Pasternak foundation", Steel Compos. Struct., Int. J., 17(4), 453-470. https://doi.org/10.12989/scs.2014.17.4.453
  20. Reddy, J.N. (1984), "A simple higher order theory for laminated composite plates", J. Appl. Mech., 51(4), 745-752. https://doi.org/10.1115/1.3167719
  21. Santos, H., Soares, C.M.M., Soares, C.A.M. and Reddy, J.N. (2008), "A finite element model for the analysis of 3D axisymmetric laminated shells with piezoelectric sensors and actuators: Bending and free vibrations", Comput. Struct., 86(9), 940-947. https://doi.org/10.1016/j.compstruc.2007.04.013
  22. Shen, H.S. (2009), "Nonlinear bending of functionally graded carbon nanotube-reinforced composite plates in thermal environments", Compos. Struct., 91(1), 9-19. https://doi.org/10.1016/j.compstruct.2009.04.026
  23. Siao, J.C.T., Dong, S.B. and Song, J. (1994), "Frequency spectra of laminated piezoelectric cylinders", ASME J. Vib. Acoust., 116(3), 364-370. https://doi.org/10.1115/1.2930437
  24. Sohn, J.W., Kim, H.S. and Choi, S.B. (2006), "Dynamic modeling and vibration control of smart hull structure", Trans. Korean Soc. Noise Vib. Eng., 16(8), 840-847. https://doi.org/10.5050/KSNVN.2006.16.8.840
  25. Spencer, W.J., Corbett, W.T., Dominguez, L.R. and Shafer, B.D. (1978), "An electronically controlled piezoelectric insulin pump and valves", IEEE, 25(3), 153-156.
  26. Vel, S.S. and Baillargeon, B.P. (2005), "Analysis of static deformation, vibration and active damping of cylindrical composite shells with piezoelectric shear actuators", J. Vib. Acoust., 127(4), 395-407. https://doi.org/10.1115/1.1898337
  27. Wang, L. and Ni, Q. (2009), "A reappraisal of the computational modelling of carbon nanotubes conveying viscous fluid", Mech. Res. Commun., 36(7), 833-837. https://doi.org/10.1016/j.mechrescom.2009.05.003

피인용 문헌

  1. An experimental study and new correlations of viscosity of ethylene glycol-water based nanofluid at various temperatures and different solid concentrations vol.58, pp.1, 2016, https://doi.org/10.12989/sem.2016.58.1.093
  2. Nanotechnology, smartness and orthotropic nonhomogeneous elastic medium effects on buckling of piezoelectric pipes vol.58, pp.5, 2016, https://doi.org/10.12989/sem.2016.58.5.931
  3. Thermo-mechanical analysis of carbon nanotube-reinforced composite sandwich beams vol.6, pp.2, 2015, https://doi.org/10.12989/csm.2017.6.2.207
  4. Influence of electro-magneto-thermal environment on the wave propagation analysis of sandwich nano-beam based on nonlocal strain gradient theory and shear deformation theories vol.20, pp.3, 2017, https://doi.org/10.12989/sss.2017.20.3.329
  5. Transient thermo-piezo-elastic responses of a functionally graded piezoelectric plate under thermal shock vol.25, pp.2, 2017, https://doi.org/10.12989/scs.2017.25.2.187
  6. Thermal, electrical and mechanical buckling loads of sandwich nano-beams made of FG-CNTRC resting on Pasternak's foundation based on higher order shear deformation theory vol.69, pp.4, 2019, https://doi.org/10.12989/sem.2019.69.4.439
  7. Improvement of thermal buckling response of FG-CNT reinforced composite beams with temperature-dependent material properties resting on elastic foundations vol.6, pp.3, 2019, https://doi.org/10.12989/aas.2019.6.3.207
  8. Free vibration analysis of uniform and stepped functionally graded circular cylindrical shells vol.33, pp.2, 2015, https://doi.org/10.12989/scs.2019.33.2.163
  9. Nonlinear dynamic response and vibration of functionally graded nanocomposite cylindrical panel reinforced by carbon nanotubes in thermal environment vol.23, pp.3, 2015, https://doi.org/10.1177/1099636219847191