DOI QR코드

DOI QR Code

A new approach to deal with sensor errors in structural controls with MR damper

  • Wang, Han (Department of Mechanical Engineering, University of Houston) ;
  • Li, Luyu (Department of Mechanical Engineering, University of Houston) ;
  • Song, Gangbing (Department of Mechanical Engineering, University of Houston) ;
  • Dabney, James B. (School of Science and Computer Engineering, University of Houston - Clear Lake) ;
  • Harman, Thomas L. (School of Science and Computer Engineering, University of Houston - Clear Lake)
  • 투고 : 2014.02.17
  • 심사 : 2014.04.17
  • 발행 : 2015.08.25

초록

As commonly known, sensor errors and faulty signals may potentially lead structures in vibration to catastrophic failures. This paper presents a new approach to deal with sensor errors/faults in vibration control of structures by using the Fault detection and isolation (FDI) technique. To demonstrate the effectiveness of the approach, a space truss structure with semi-active devices such as Magneto-Rheological (MR) damper is used as an example. To address the problem, a Linear Matrix Inequality (LMI) based fixed-order $H_{\infty}$ FDI filter is introduced and designed. Modeling errors are treated as uncertainties in the FDI filter design to verify the robustness of the proposed FDI filter. Furthermore, an innovative Fuzzy Fault Tolerant Controller (FFTC) has been developed for this space truss structure model to preserve the pre-specified performance in the presence of sensor errors or faults. Simulation results have demonstrated that the proposed FDI filter is capable of detecting and isolating sensor errors/faults and actuator faults e.g., accelerometers and MR dampers, and the proposed FFTC can maintain the structural vibration suppression in faulty conditions.

키워드

과제정보

연구 과제 주관 기관 : National Natural Science Foundation of China

참고문헌

  1. Abdalla, M.O., Nobrega, E.G. and Grigoriadis, K.M. (2001), "Fault detection and isolation filter design for linear parameter varying systems", Proceedings of the American Control Conference, Arlington, USA, June.
  2. Beard, R.V. (1971), Failure accommodation in linear systems through self-reorganization, Ph.D. Dissertation, Massachusetts Institute of Technology, Cambridge.
  3. Bokor, J. and Balas, G. (2004), "Detection filter design for LPV systems-a geometric approach", Automatica, 40(3), 511-518. https://doi.org/10.1016/j.automatica.2003.11.003
  4. Chen, J. and Patton, R.J. (1999b), Robust Model-based Fault Diagnosis for Dynamic Systems, Kluwer Academic Publishers, Boston, MA, USA.
  5. Chiang, L.H., Russell, E.L. and Braatz, R.D. (2001), Fault Detection and Diagnosis in Industrial Systems, Springer, London, UK.
  6. Ding, X. and Frank, P.M. (1990), "Fault detection via factorization approach", Syst. Control Lett., 14(5), 431-436. https://doi.org/10.1016/0167-6911(90)90094-B
  7. Edelmayer, A., Bokor, J. and Keviczky, L. (1997), "Improving sensitivity of $H_{\infty}$ detection filters in linear systems", Proceedings of the 11th IFAC Symposium System Identification, Rukuoka, Japan.
  8. Foo, G.H.B., Zhang, X. and Vilathgamuwa, D.M. (2013), "A sensor fault detection and isolation method in interior permanent-magnet synchronous motor drives based on an extended Kalman filter", IEEE T. Ind. Electron., 60(8), 3485-3495. https://doi.org/10.1109/TIE.2013.2244537
  9. Frank, P.M. and Ding, X. (1994), "Frequency domain approach to optimally robust residual generation and evaluation for model-based fault diagnosis", Automatic, 30(5), 789-804. https://doi.org/10.1016/0005-1098(94)90169-4
  10. Grigoriadis, K.M. and Watson, J.T. (1997), "Reduced order $L_2-L_{\infty}$ filtering via linear matrix inequalities", IEEE T. Aero. Elec. Sys., 33(4), 1326-1338. https://doi.org/10.1109/7.625133
  11. Huo, L., Song, G., Nagarajaiah, S. and Li, H. (2012), "Semi-active vibration suppression of a space truss structure using a fault tolerant controller", J. Vib. Control, 18(10), 1436-1453. https://doi.org/10.1177/1077546311421514
  12. Isermann, R. (1997), "Supervision, fault-detection and fault-diagnosis methods - an introduction", Control Eng. Pract., 5(5), 639-652. https://doi.org/10.1016/S0967-0661(97)00046-4
  13. Jones, H.L. (1973), Failure detection in linear systems, Ph.D. Dissertation, Massachusetts Institute of Technology, Cambridge.
  14. Loocma, S.T. (2001), Observer based fault detection and isolation for nonlinear systems, Ph.D. Dissertation, University of Netherlands, Amsterdam.
  15. Mangoubi, R.S., Appleby, B.D., Verghese, G.C. and Vander Velde, W.E. (1995), "A robust failure detection and isolation algorithm", Proceedings of the 34th IEEE Conference on Decision and Control, New Orleans, USA.
  16. Massoumnia, M.A. (1986), "A geometric approach to the synthesis of failure detection filters", IEEE T. Automat. Contr., 31(9), 839-846. https://doi.org/10.1109/TAC.1986.1104419
  17. Neimann, H.H. and Stoustrup, J. (1996), "Filter design for failure detection and isolation in the presence of modeling errors and disturbances", Proceedings of the 35th IEEE Conference on Decision and Control, Kobe, Japan.
  18. Nobrega, E.G., Abdalla, M.O. and Grigoriadis, K.M. (2000), "LMI-Based filter design for fault detection and isolation", Proceedings of the 39th IEEE Conference on Decision and Control, Sydney, Australia, December.
  19. Oh, H.U. and Onoda, J. (2002), "An experimental study of a semi-active magneto-rheological fluid variable damper for vibration suppression of truss structures", Smart Mater. Struct., 11(1), 156-162. https://doi.org/10.1088/0964-1726/11/1/318
  20. Patton, R.J. (1997a), "Fault tolerant control systems: the 1997 situation", Proceedings of the IFAC Safeprocess Symposium, Hull, UK, August.
  21. Rodrigues, M., Sahnoun, M., Theilliol, D. and Ponsart, J.C. (2013), "Sensor fault detection and isolation filter for polytopic LPV systems: a winding machine application", J. Process Control, 23(6), 805-816. https://doi.org/10.1016/j.jprocont.2013.04.002
  22. Rosa, P. and Silvestre, C. (2013), "Fault detection and isolation of LPV systems using set-valued observers: an application to a fixed-wing aircraft", Control Eng. Pract., 21(3), 242-252. https://doi.org/10.1016/j.conengprac.2012.10.005
  23. Spencer, B.F., Yang, G., Carlson, J.D. and Sain, M.K. (1998), "Smart dampers for seismic protection of structures: a full-scale study", Proceedings of the 2nd world conference on Structural Control, Kyoto, Japan, June.
  24. Vanga, P. (2004), "Fault detection and isolation in mechanical systems using linear matrix inequalities", Master thesis, University of Houston, Houston.
  25. Viswanadham, N. and Minto, K.D. (1988), "Robust observer design with application to fault detection", Proceedings of the American Control Conference, Atlanta, GA, June.
  26. Wang, H. and Song, G. (2011), "Fault detection and fault tolerant control of a smart base isolation system with magneto-rheological damper", Smart Mater. Struct., 20(8), 085015. https://doi.org/10.1088/0964-1726/20/8/085015
  27. Youssef, A.B., El Khil, S.K. and Slama-Belkhodja, I. (2013) "State observer-based sensor fault detection and isolation, and fault tolerant control of a single-phase PWM rectifier for electric railway traction", IEEE T. Power Electron., 28(12), 5842-5853. https://doi.org/10.1109/TPEL.2013.2257862

피인용 문헌

  1. Equivalent Linearization Methods for a Control System with Clutching Inerter Damper vol.9, pp.4, 2019, https://doi.org/10.3390/app9040688
  2. Experimental Study on Vibration Control of Suspended Piping System by Single-Sided Pounding Tuned Mass Damper vol.9, pp.2, 2019, https://doi.org/10.3390/app9020285
  3. Stochastic vibration suppression analysis of an optimal bounded controlled sandwich beam with MR visco-elastomer core vol.19, pp.1, 2015, https://doi.org/10.12989/sss.2017.19.1.021
  4. A sensor fault detection strategy for structural health monitoring systems vol.20, pp.1, 2015, https://doi.org/10.12989/sss.2017.20.1.043
  5. Time-Delayed Feedback Control of Piezoelectric Elastic Beams under Superharmonic and Subharmonic Excitations vol.9, pp.8, 2015, https://doi.org/10.3390/app9081557
  6. Stochastic stability control analysis of an inclined stay cable under random and periodic support motion excitations vol.23, pp.6, 2019, https://doi.org/10.12989/sss.2019.23.6.641
  7. Vibration control for the nonlinear resonant response of a piezoelectric elastic beam via time-delayed feedback vol.28, pp.9, 2015, https://doi.org/10.1088/1361-665x/ab2e3d
  8. Passive Control Analysis and Design of Twin-Tower Structure with Chassis vol.20, pp.6, 2020, https://doi.org/10.1142/s0219455420400106
  9. Seismic Assessment and Optimal Design for Structures with Clutching Inerter Dampers vol.146, pp.4, 2015, https://doi.org/10.1061/(asce)em.1943-7889.0001732