DOI QR코드

DOI QR Code

An original device for train bogie energy harvesting: a real application scenario

  • Amoroso, Francesco (University of Napoli "Federico II", Industrial Engineering Department) ;
  • Pecora, Rosario (University of Napoli "Federico II", Industrial Engineering Department) ;
  • Ciminello, Monica (C.I.R.A.- Italian Aerospace Research Center, Smart Structures Lab) ;
  • Concilio, Antonio (C.I.R.A.- Italian Aerospace Research Center, Smart Structures Lab)
  • 투고 : 2014.03.19
  • 심사 : 2014.12.27
  • 발행 : 2015.09.25

초록

Today, as railways increase their capacity and speeds, it is more important than ever to be completely aware of the state of vehicles fleet's condition to ensure the highest quality and safety standards, as well as being able to maintain the costs as low as possible. Operation of a modern, dynamic and efficient railway demands a real time, accurate and reliable evaluation of the infrastructure assets, including signal networks and diagnostic systems able to acquire functional parameters. In the conventional system, measurement data are reliably collected using coaxial wires for communication between sensors and the repository. As sensors grow in size, the cost of the monitoring system can grow. Recently, auto-powered wireless sensor has been considered as an alternative tool for economical and accurate realization of structural health monitoring system, being provided by the following essential features: on-board micro-processor, sensing capability, wireless communication, auto-powered battery, and low cost. In this work, an original harvester device is designed to supply wireless sensor system battery using train bogie energy. Piezoelectric materials have in here considered due to their established ability to directly convert applied strain energy into usable electric energy and their relatively simple modelling into an integrated system. The mechanical and electrical properties of the system are studied according to the project specifications. The numerical formulation is implemented with in-house code using commercial software tool and then experimentally validated through a proof of concept setup using an excitation signal by a real application scenario.

키워드

참고문헌

  1. Amoroso, F., Pecora, R., Ferraro, S., Lecce, L., Girolami, I. and Antuofermo, P. (2011), "Design and testing of piezoelectric energy harvesting system from vibrations for wireless sensors", Proceedings of CEAS 2011 The International Conference of the European Aerospace Societies, Venice, Italy, September.
  2. Anton, S.R. and Sodano, H.A. (2007), "A review of power harvesting using piezoelectric materials (2003-2006)", Smart Mater. Struct., 16(3), 1-21. https://doi.org/10.1088/0964-1726/16/1/001
  3. Ciminello, M., Ameduri, S. and Concilio, A. (2008), "FE modelling of an innovative vibration control Shunt technique", J. Intel. Mat. Syst. Str., 19, 875-887. https://doi.org/10.1177/1045389X07082379
  4. Ciminello, M., Lecce, L., Ameduri, S., Calabro, A. and Concilio, A. (2010), "Multi-tone switching shunt control by a PZT network embedded into a fibreglass panel: design, manufacture and test", J. Intel. Mat. Syst. Str., 21(4), 437-451. https://doi.org/10.1177/1045389X09356485
  5. Ericka, M., Vasic, D., Costa, F., Poulin, G. and Tliba, S. (2005), "Energy harvesting from vibration using a piezoelectric membrane", J. Physique Coll., 128, 187-193.
  6. Junrui, L. and Wei-Hsin, L. (2011), "Energy flow in piezoelectric energy harvesting systems", Smart Mater. Struct., 20(1), 1-11.
  7. Kim, H.W., Priya, S., Uchino, K. and Newnham, R.E. (2005), "Piezoelectric energy harvesting under high pre-stressed cyclic vibrations", J. Electroceramics, 15(1), 27-34. https://doi.org/10.1007/s10832-005-0897-z
  8. Kim, H.W., Batra, A., Priya, S., Uchino, K., Markley, D., Newnham, R.E. and Hofmann, H.F. (2004), "Energy harvesting using a piezoelectric cymbal transducer in dynamic environment", J. Appl. Physics, 43, 6178-6183. https://doi.org/10.1143/JJAP.43.6178
  9. Lien, I.C. and Shu1, Y.C. (2012) "Array of piezoelectric energy harvesting by the equivalent impedance approach", Smart Mater. Struct., 21(8), ID 082001.
  10. Lin, H.C., Wu, P.H., Lien, I.C. and Shu, Y.C. (2013), "Analysis of an array of piezoelectric energy harvesters connected in series", Smart Mater. Struct., 22(9), ID 094026.
  11. Liu, Y., Tian, G., Wang, Y., Lin, J., Zhang, Q. and Hofmann, H. F. (2009), "Active piezoelectric energy harvesting: general principle and experimental demonstration", J. Intel. Mat. Syst. Str., 20(5), 575-585. https://doi.org/10.1177/1045389X08098195
  12. Mitcheson, P.D., Yeatman, E.M., Rao, G.K., Holmes, A.S. and Green, T.C. (2008), "Energy harvesting from human and machine motion for wireless electronic devices", P. IEEE, 96(9), 1457-1486. https://doi.org/10.1109/JPROC.2008.927494
  13. Ng, T.H. and Liao, W.H. (2005), "Sensitivity analysis and energy harvesting for a self-powered piezoelectric sensor", J. Intel. Mat. Syst. Str., 16(10), 785-797. https://doi.org/10.1177/1045389X05053151
  14. Roundy, S., Steingart, D., Frechette, L., Wright, P. and Rabaey, J. (2004), "Power sources for wireless sensor networks", Lecture Notes on Computer Science, 2920, 1-17.
  15. Shu1, Y.C. and Lien, I. C. (2006), "Analysis of power output for piezoelectric energy harvesting systems", Smart Mater. Struct., 15(6), 1499-1512. https://doi.org/10.1088/0964-1726/15/6/001
  16. Website link: http://www.physikinstrumente.com
  17. Wu, W.J., Wickenheiser, A.M., Reissman, T. and Garcia, E. (2009), "Modeling and experimental verification of synchronized discharging techniques for boosting power harvesting from piezoelectric transducers", Smart Mater. Struct., 18(5), 1-14.
  18. Zhu, M., Worthington, E. and Njuguna, J. (2009), "Analyses of power output of piezoelectric energy-harvesting devices directly connected to a load resistor using a coupled piezoelectric-circuit finite element method", IEEE T. Ultrason. Fer., 56(7), 1309-1317. https://doi.org/10.1109/TUFFC.2009.1187

피인용 문헌

  1. Bimorph piezoelectric energy harvester structurally integrated on a trapezoidal plate vol.18, pp.2, 2016, https://doi.org/10.12989/sss.2016.18.2.249
  2. Wideband energy harvesting based on mixed connection of piezoelectric oscillators vol.26, pp.9, 2017, https://doi.org/10.1088/1361-665X/aa7981
  3. Energy harvesting techniques for health monitoring and indicators for control of a damaged pipe structure vol.21, pp.3, 2018, https://doi.org/10.12989/sss.2018.21.3.287
  4. Application of low-power energy harvesting solutions in the railway field: a review vol.59, pp.6, 2021, https://doi.org/10.1080/00423114.2020.1726973
  5. Sound and vibration energy harvesting for railway applications: A review on linear and nonlinear techniques vol.7, pp.None, 2015, https://doi.org/10.1016/j.egyr.2021.01.087