DOI QR코드

DOI QR Code

C 중유의 황 함유량에 따른 CO2 배출 특성

CO2 Emission Characteristics of Bunker C Fuel Oil by Sulfur Contents

  • 임완규 (한국석유관리원 석유기술연구소) ;
  • 도진우 (한국석유관리원 석유기술연구소) ;
  • 황인하 (한국석유관리원 석유기술연구소) ;
  • 하종한 (한국석유관리원 석유기술연구소) ;
  • 이상섭 (충북대학교 환경공학과)
  • Lim, Wan-Gyu (Research Institute of Petroleum Technology, Korea Petroleum Quality & Distribution Authority) ;
  • Doe, Jin-Woo (Research Institute of Petroleum Technology, Korea Petroleum Quality & Distribution Authority) ;
  • Hwang, In-Ha (Research Institute of Petroleum Technology, Korea Petroleum Quality & Distribution Authority) ;
  • Ha, Jong-Han (Research Institute of Petroleum Technology, Korea Petroleum Quality & Distribution Authority) ;
  • Lee, Sang-Sup (Department of Environmental Engineering, Chungbuk National University)
  • 투고 : 2015.07.03
  • 심사 : 2015.08.11
  • 발행 : 2015.08.31

초록

Bunker C fuel oil is a high-viscosity oil obtained from petroleum distillation as a residue. The sulfur content of bunker C fuel oil is limited to 4.0% or even lower to protect the environment. Because bunker C fuel oil is burned in a furnace or boiler for the generation of heat or used in an engine for the generation of power, carbon dioxide is emitted as a result of combustion. The objective of this study is to investigate $CO_2$ emission characteristics of bunker C fuel oil by sulfur contents. Calorific values and carbon contents of the fuels were measured using the oxygen bomb calorimeter method and the CHN elemental analysis method, respectively. Sulfur and hydrogen contents, which were used to calculate the net calorific value, were also measured and then net calorific values and $CO_2$ emission factors were determined. The results showed that hydrogen content increases and carbon content decreases by reducing sulfur contents for bunker C fuel oil with sulfur contents less than 1.0%. For sulfur contents between 1.0% and 4.0%, carbon content increases as sulfur content decreases but there is no evident variation in hydrogen content. Net calorific value increases by reducing sulfur contents. $CO_2$ emission factor, which is calculated by dividing carbon content by net calorific value, decreases as sulfur content decreases for bunker C fuel oil with sulfur contents less than 1.0% but it showed relatively constant values for sulfur contents between 1.0% and 4.0%.

키워드

참고문헌

  1. ASTM (American Society for Testing and Materials) (2010) Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants, ASTM D5291.
  2. ASTM (American Society for Testing and Materials) (2014) Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter, ASTM D240.
  3. Eggleston, H.S., L. Buendia, K. Miwa, T. Ngara, and K. Tanabe (2006) 2006 IPCC Guidelines for National Greenhouse Gas Inventories, Volume 1-2, IGES, Japan.
  4. GIR (Greenhouse Gas Inventory & Research Center of Korea) (2014) National Greenhouse Gas Inventory Report of Korea.
  5. ISO (International Organization for Standardization) (2003) Petroleum products - Determination of sulfur content- Energy-dispersive X-ray fluorescence spectrometry, ISO 8754.
  6. KMOE (Korean Ministry of Environment) (2015) Clean Air Conservation Act.
  7. Lloyd, W.G. and D.A. Davenport (1980) Applying thermodynamics to fossil fuels: Heats of combustion from elemental compositions, J. Chem. Educ., 57(1), 56-60. https://doi.org/10.1021/ed057p56
  8. Quick, J.C. and D.C. Glick (2000) Carbon dioxide from coal combustion: variation with rank of US coal, Fuel, 79, 803-812. https://doi.org/10.1016/S0016-2361(99)00197-0
  9. Song, C., U.T. Turaga, and X. Ma (2007) Desulfurization, Encyclopedia of Chemical Processing, 651-661.