DOI QR코드

DOI QR Code

Desorption and Oxidation Properties of Saturated Arsenate on LDHs

하이드로탈사이트류에 포화 흡착된 비소(V)의 탈착 및 산화 특성

  • Received : 2015.04.29
  • Accepted : 2015.07.17
  • Published : 2015.08.31

Abstract

In order to establish the design parameters of adsorption for arsenic compounds with hydrotalcite including chlorine ion, the basic properties of adsorption and desorption as well as the oxidation of As (III) were examined in batch tests. The maximum adsorption capacities of arsenite and arsenate were 6.2 mg-As(III)/g and 103 mg-As (V)/g, respectively. Although 80.4% of maximum desorption was shown in 20% NaOH solution, 5~10% of NaOH was recommended considering operating benefits, where the proper condition of the desorption was in the range of 73% to 80%. The most suitable desorption condition was in the combination of NaCl (10~20%) and NaOH (5~10%). Within 2 minutes, As (III) was easily oxidized to As (V) with 0.0001 N KMnO4, where the maximum oxidization ratio was shown to 98.9%.

Keywords

References

  1. Chang, Y. Y., Kim, K. S., Song, K. H., Yang, J. K., 2006, Optimal concitions for As(III) removal by filtration system packed with different ratio of iron-coated sand manganese-coated sand, J. Kor. Soc. Envi. Eng., 28(11), 1186-1191.
  2. Choi, H., Park, S. K., Kim, D. S., Kim, M. H., 2010, Risk assessment of arsenic in agricultural procucts, Kor. J. Envi. Agri., 29(3), 266-272. https://doi.org/10.5338/KJEA.2010.29.3.266
  3. Choi, Y. M., Choi, W. H., Kim, J. H., Park, J. Y., 2009, Adsorption of arsenate on the synthesized layered double hydroxide materials, J. Kor. Soc. Civil Eng., 29(1B), 91-96.
  4. Jung, Y. I., Lee, W. C., Cho, H. G., Yun, S. T., Kim, S. O., 2008, Adsorption of arsenic onto two-line ferrihydrite, J. Miner. Soc. Kor., 21(3), 227-237.
  5. Jung, Y. J., 2008, The effect of phosphate desorption solution on LDH (Layered Double Hydroxide) desorption, J. Kor. Soc. Wat. Qual., 24(6), 670-675.
  6. Jung, Y. J., Min, K. S., 2005, Phosphorus adsorption by layered double hydroxide, J. Kor. Soc. Wat. Waste., 19(4), 404-410.
  7. Kim, B. K., Chang, Y. Y., Yang, J. K., 2011, Continuous removal of As(III) by filter media coated with iron and manganese oxides, J. Kor. Soc. Wat. Sci. Tech., 19(2), 69-76.
  8. Kim, S. D., Oh, Y. J., 2000, Mathematical modelling of phenol desorption from spent activated carbon by acetone, J. Kor. Soc. Envi. Eng., 22(12), 2115-2123.
  9. Kiso, Y., Jung, Y. J., Yamada, T., Nagai, M., Min, K. S., 2005, Removal properties of arsenic compounds with synthetic hydrotalcite compounds, Wat.Sci.Tech.: Wat. sup., 5(5), 75-81.
  10. Kiso, Y., Jung, Y. J., Yamamoto, H., Oguchi, T., Kuzawa, K., Yamada, T., Kim, S. S., Ahn, K. H., 2010, The effect of co-existing solutes on arsenate removal with hydrotalcite compound, Wat. Sci. Tech., 61(5), 369-373.
  11. Lee, S. W., Na, Y. S., An, C. D., Lee, M. G., 2012, Comparison of desorption characteristics of water vapor on the types of zeolites, J. Env. Sci., 21(12), 1463-1468.
  12. Park, Y. R., Hong, S. H., Kim, J. H., Park, J. Y., 2012, Arsenic removal using the surface modified granular activated carbon treated with ferric chloride, J. Kor. Soc. Wat. Waste., 26(1), 77-85. https://doi.org/10.11001/jksww.2012.26.1.077
  13. Yang, L, Dadwhal, M., Shahrivari, Z., Ostwal, M., Liu, P. K. T., Sahimi, M., Tsotsis, T. T., 2006, Adsorption of arsenic on layered double hydroxides: Effect of particle size, Ind. Eng. Chem. Res., 45, 4742-4751. https://doi.org/10.1021/ie051457q
  14. Yu, M. R., Yang, J. K., Chang, Y. Y., 2008, As(III) oxidation and phenol adsorption by the activated carbon impregnated with Mn oxide, J. Kor. Soc. Envi. Eng., 30(4), 423-439.