DOI QR코드

DOI QR Code

고장력 강판에서의 크랙 전파 및 성장특성에 대한 시뮬레이션 해석

Simulation Analysis on the Property of Crack Propagation and Growth at High Tension Steel Plate

  • 강병목 (계명대학교 대학원 기계공학과) ;
  • 김정오 (한국기계연구원 광응용기계연구실) ;
  • 이제훈 (한국기계연구원 광응용기계연구실) ;
  • 조재웅 (공주대학교 기계자동차공학부) ;
  • 한문식 (계명대학교 기계자동차공학과)
  • Kang, Byungmok (Department of Mechanical Engineering, Graduate School, Keimyung University) ;
  • Kim, Jengo (Department of High Density Energy Beam Processing, Korea Institute of Machinery & Materials) ;
  • Lee, Jaehoon (Department of High Density Energy Beam Processing, Korea Institute of Machinery & Materials) ;
  • Cho, Jaeung (Department of Mechanical & Automotive Engineering, Kongju National University) ;
  • Han, Moonsik (Department of Mechanical & Automotive Engineering, Keimyung University)
  • 투고 : 2014.08.25
  • 심사 : 2015.06.01
  • 발행 : 2015.09.01

초록

In this study, the property of crack propagation and growth at high tension steel plate existed with center crack is investigated. The behaviors of fracture mechanics due to existence or not of hole near the center crack in specimen and the length of crack length are investigated when the load is applied at the one side end of specimen. Stress, deformation and deformation of this specimen are evaluated through simulation analysis. By the analysis results at this study, stress intensity factors are obtained. The damage happened at machine or structure with crack or defect can be estimated on the basis of study results.

키워드

참고문헌

  1. Z. Wu, X. Cheng and J. Yuan, "Applying Axiomatic Design Theory to the Multi-objective Optimization of Disk Brake," International Federation for Information Processing, Vol.370, pp.62-73, 2012.
  2. D. A. Hancq, A. J. Walters and J. L. Beuth, "Development of an Object Oriented Fatigue Tool," Engineering with Computers, Vol.16, Issue 2, pp.131-144, 2000. https://doi.org/10.1007/s003660070016
  3. T. I. Yeo, "A Study on Wear Life Prediction of Disk Brake Pads," Transactions of KSAE, Vol.10, No.4, pp.199-205, 2002.
  4. Y. C. Park and D. W. Lee, "Shape Optimization of the Lower Control Arm Using the Characteristic Function and the Fatigue Analysis," Transactions of KSAE, Vol.13, No.1, pp.119-125, 2005.
  5. J. H. Kim, D. U. Park, J. H. Lee, M. K. Kim and W. S. Yoo, "Evaluation of Ride Comfort considering Seat Vibration," KSAE Spring Conference Proceedings, pp.933-938, 2002.
  6. H. Y. Kim, K. T. Lee, H. I. Choi, S. T. Kim, C. S. Park and D. J. Lee, "Structural Analysis for the Development of Round Recliner," KSAE Fall Conference Proceedings, pp.1361-1366, 2003.
  7. M. S. Kim, K. J. Ko, H. W. Song, C. G. Yang and K. M. Kim, "The Finite Element Analysis on 2-piece Forged Wheel for Fatigue Life Prediction," KSAE Fall Conference Proceedings, pp.691-696, 2004.
  8. M. S. Kim, K. J. Ko, J. H. Kim, C. G. Yang and K. M. Kim, "The Study on the Fatigue Life Prediction on Wheels through CAE," Transactions of KSAE, Vol.12, No.2, pp.117-122, 2004.