The Journal of Advanced Prosthodontics

The Korean Academy of Prosthodonitics (대한치과보철학회)
권호 표지
DOI QR코드

DOI QR Code

Effect of dentin pretreatment and curing mode on the microtensile bond strength of self-adhesive resin cements

  • Youm, Seung-Hyun (Department of Conservative Dentistry, School of Dentistry, Pusan National University, Dental Reserch Institute) ;
  • Jung, Kyoung-Hwa (Department of Conservative Dentistry, School of Dentistry, Pusan National University, Dental Reserch Institute) ;
  • Son, Sung-Ae (Department of Conservative Dentistry, School of Dentistry, Pusan National University, Dental Reserch Institute) ;
  • Kwon, Yong-Hoon (Department of Dental Materials, School of Dentistry, Pusan National University) ;
  • Park, Jeong-Kil (Department of Conservative Dentistry, School of Dentistry, Pusan National University, Dental Reserch Institute)
  • Received : 2015.01.27
  • Accepted : 2015.04.13
  • Published : 2015.08.31
Download PDF
⟨ Previous Next ⟩

Abstract

PURPOSE. The aim was to evaluate the effect of curing mode and different dentin surface pretreatment on microtensile bond strength (${\mu}TBS$) of self-adhesive resin cements. MATERIALS AND METHODS. Thirty-six extracted human permanent molars were sectioned horizontally exposing flat dentin surface. The teeth were divided into 12 groups (3 teeth/group) according to the dentin surface pretreatment methods (control, 18% EDTA, 10% Polyacrylic acid) and curing mode (self-curing vs. light-curing) of cement. After pretreatment, composite resin blocks were cemented with the following: (a) G-CEM LinkAce; (b) RelyX U200, followed by either self-curing or light-curing. After storage, the teeth were sectioned and ${\mu}TBS$ test was performed using a microtensile testing machine. The data was statistically analyzed using one-way ANOVA, Student T-test and Scheffe's post-hoc test at P<.05 level. RESULTS. For G-CEM LinkAce cement groups, polyacrylic acid pretreatment showed the highest ${\mu}TBS$ in the self-cured group. In the light-cured group, no significant improvements were observed according to the dentin surface pretreatment. There were no significant differences between curing modes. Both dentin surface pretreatment methods helped to increase the ${\mu}TBS$ of RelyX U200 resin cement significantly and degree of pretreatment effect was similar. No significant differences were found regarding curing modes except control groups. In the comparisons of two self-adhesive resin cements, all groups within the same pretreatment and curing mode were significantly different excluding self-cured control groups. CONCLUSION. Selecting RelyX U200 used in this study and application of dentin surface pretreatment with EDTA and polyacrylic acid might be recommended to enhance the bond strength of cement to dentin.

Keywords

References

  1. Pavan S, dos Santos PH, Berger S, Bedran-Russo AK. The effect of dentin pretreatment on the microtensile bond strength of self-adhesive resin cements. J Prosthet Dent 2010;104:258-64. https://doi.org/10.1016/S0022-3913(10)60134-5
  2. Burgess JO, Ghuman T, Cakir D. Self-adhesive resin cements. J Esthet Restor Dent 2010;22:412-9. https://doi.org/10.1111/j.1708-8240.2010.00378.x
  3. Broyles AC, Pavan S, Bedran-Russo AK. Effect of dentin surface modification on the microtensile bond strength of self-adhesive resin cements. J Prosthodont 2013;22:59-62. https://doi.org/10.1111/j.1532-849X.2012.00890.x
  4. Pisani-Proenca J1, Erhardt MC, Amaral R, Valandro LF, Bottino MA, Del Castillo-Salmeron R. Influence of different surface conditioning protocols on microtensile bond strength of self-adhesive resin cements to dentin. J Prosthet Dent 2011;105:227-35. https://doi.org/10.1016/S0022-3913(11)60037-1
  5. De Munck J, Vargas M, Van Landuyt K, Hikita K, Lambrechts P, Van Meerbeek B. Bonding of an auto-adhesive luting material to enamel and dentin. Dent Mater 2004;20: 963-71. https://doi.org/10.1016/j.dental.2004.03.002
  6. Santos MJ, Bapoo H, Rizkalla AS, Santos GC. Effect of dentin-cleaning techniques on the shear bond strength of selfadhesive resin luting cement to dentin. Oper Dent 2011;36: 512-20. https://doi.org/10.2341/10-392-L
  7. Jacques P, Hebling J. Effect of dentin conditioners on the microtensile bond strength of a conventional and a self-etching primer adhesive system. Dent Mater 2005;21:103-9. https://doi.org/10.1016/j.dental.2003.12.004
  8. Kambara K, Nakajima M, Hosaka K, Takahashi M, Thanatvarakorn O, Ichinose S, Foxton RM, Tagami J. Effect of smear layer treatment on dentin bond of self-adhesive cements. Dent Mater J 2012;31:980-7. https://doi.org/10.4012/dmj.2012-031
  9. Grasso CA, Caluori DM, Goldstein GR, Hittelman E. In vivo evaluation of three cleansing techniques for prepared abutment teeth. J Prosthet Dent 2002;88:437-41. https://doi.org/10.1067/mpr.2002.128123
  10. Sarac D, Sarac YS, Kulunk S, Kulunk T. Effect of the dentin cleansing techniques on dentin wetting and on the bond strength of a resin luting agent. J Prosthet Dent 2005;94:363-9. https://doi.org/10.1016/j.prosdent.2005.07.009
  11. Chaiyabutr Y, Kois JC. The effects of tooth preparation cleansing protocols on the bond strength of self-adhesive resin luting cement to contaminated dentin. Oper Dent 2008; 33:556-63. https://doi.org/10.2341/07-141
  12. Bavbek AB, Goktas B, Sahinbas A, Ozcopur B, Eskitascioglu G, Ozcanc M. Effect of different mechanical cleansing protocols of dentin for recementation procedures on microshear bond strength of conventional and self-adhesive resin cements. Int J Adhes Adhes 2013;41:107-12. https://doi.org/10.1016/j.ijadhadh.2012.10.012
  13. Duke ES, Phillips RW, Blumershine R. Effects of various agents in cleaning cut dentine. J Oral Rehabil 1985;12:295-302. https://doi.org/10.1111/j.1365-2842.1985.tb01284.x
  14. Arrais CA, Rueggeberg FA, Waller JL, de Goes MF, Giannini M. Effect of curing mode on the polymerization characteristics of dual-cured resin cement systems. J Dent 2008;36:418-26. https://doi.org/10.1016/j.jdent.2008.02.014
  15. Aguiar TR, Di Francescantonio M, Ambrosano GM, Giannini M. Effect of curing mode on bond strength of selfadhesive resin luting cements to dentin. J Biomed Mater Res B Appl Biomater 2010;93:122-7.
  16. Arrais CA, Giannini M, Rueggeberg FA, Pashley DH. Microtensile bond strength of dual-polymerizing cementing systems to dentin using different polymerizing modes. J Prosthet Dent 2007;97:99-106. https://doi.org/10.1016/j.prosdent.2006.12.007
  17. Luhrs AK, De Munck J, Geurtsen W, Van Meerbeek B. Composite cements benefit from light-curing. Dent Mater 2014;30:292-301. https://doi.org/10.1016/j.dental.2013.11.012
  18. Blomlof J, Blomlof L, Lindskog S. Effect of different concentrations of EDTA on smear removal and collagen exposure in periodontitis-affected root surfaces. J Clin Periodontol 1997;24:534-7. https://doi.org/10.1111/j.1600-051X.1997.tb00225.x
  19. Cehreli ZC, Altay N. Etching effect of 17% EDTA and a non-rinse conditioner (NRC) on primary enamel and dentin. Am J Dent 2000;13:64-8.
  20. G-CEM LinkAce Product Brochure 2012. GC.
  21. Rely XTM U-200 Product Brochure 2012. 3M.

Cited by

  1. Smear layer removal by different chemical solutions used with or without ultrasonic activation after post preparation vol.42, pp.4, 2017, https://doi.org/10.5395/rde.2017.42.4.324
  2. Test methods for bond strength of glass fiber posts to dentin: A review vol.93, pp.1-2, 2017, https://doi.org/10.1080/00218464.2016.1184094
  3. Effect of Curing Mode on Shear Bond Strength of Self-Adhesive Cement to Composite Blocks vol.9, pp.3, 2016, https://doi.org/10.3390/ma9030210
  4. Analysis of the bond interface between self-adhesive resin cement to eroded dentin in vitro vol.13, pp.11, 2018, https://doi.org/10.1371/journal.pone.0208024
  5. Influence of abutment height and convergence angle on the retrievability of cement-retained implant prostheses with a lingual slot vol.10, pp.5, 2018, https://doi.org/10.4047/jap.2018.10.5.381
  6. Effect of Surface Treatment on Shear Bond Strength between Resin Cement and Ce-TZP/Al 2 O 3 vol.2016, pp.None, 2016, https://doi.org/10.1155/2016/7576942
  7. Microtensile bond strength and scanning electron microscopic evaluation of zirconia bonded to dentin using two self-adhesive resin cements; effect of airborne abrasion and aging vol.3, pp.2, 2015, https://doi.org/10.1016/j.fdj.2017.07.002
  8. Positive influence of simvastatin used as adjuvant agent for cavity lining vol.23, pp.9, 2015, https://doi.org/10.1007/s00784-018-2757-7
  9. Influence of Non-Thermal Atmospheric Pressure Plasma Treatment on Shear Bond Strength between Y-TZP and Self-Adhesive Resin Cement vol.12, pp.20, 2015, https://doi.org/10.3390/ma12203321
  10. Influence of inorganic filler content of resin luting agents and use of adhesive on the performance of bonded ceramic vol.122, pp.6, 2019, https://doi.org/10.1016/j.prosdent.2019.09.013
  11. Effect of Different Matrix Metalloproteinase Inhibitors on Shear Bond Strength of Composite Attached to Primary Teeth Dentin vol.9, pp.3, 2020, https://doi.org/10.4103/ejgd.ejgd_167_20
  12. Influence of Er,Cr:YSGG Laser Dentin Conditioning on the Bond Strength of Bioactive and Conventional Bulk-Fill Dental Restorative Material vol.38, pp.1, 2015, https://doi.org/10.1089/photob.2019.4661
  13. Effect of Cavity Disinfectants on Adhesion to Primary Teeth-A Systematic Review vol.22, pp.9, 2015, https://doi.org/10.3390/ijms22094398
  14. How to improve bond stability to eroded dentin: a comprehensive review vol.35, pp.10, 2015, https://doi.org/10.1080/01694243.2020.1835266