DOI QR코드

DOI QR Code

Dimensionless analysis of composite rectangular and circular RC columns

  • Massumi, Ali (Department of Civil Engineering, Faculty of Engineering, Kharazmi University) ;
  • Badkoubeh, Alireza (Department of Civil Engineering, Faculty of Engineering, Kharazmi University)
  • 투고 : 2014.04.15
  • 심사 : 2015.01.09
  • 발행 : 2015.08.25

초록

A numerical procedure is presented that provides ultimate curvature and moment domains for composite rectangular and circular cross-sections of reinforced concrete columns with or without an embedded steel section subjected to combined axial loading and biaxial bending. The stress resultants for the concrete and reinforcement bars are calculated using fiber analysis and the stress resultants for the encased structural steel are evaluated using an exact integration of the stress-strain curve over the area of the steel section. A dimensionless formula is proposed that can be used for any section with similar normalized geometric and mechanical parameters. The contribution of each material to the bearing capacity of a section (resistance load and moments) is calculated separately so that the influence of each geometric or mechanical parameter on the bearing capacity can be investigated separately.

키워드

참고문헌

  1. ACI 318 (2008), Building Code Requirements for Structural Concrete and Commentary; American Concrete Institute (ACI).
  2. Bonet, J.L., Romero, M.L., Miguel, P.F. and Fernandez, M.A. (2004), "A fast stress integration algorithm for reinforced concrete sections with axial loads and biaxial bending", J. Comput. Struct., 82, 213-225. https://doi.org/10.1016/j.compstruc.2003.10.009
  3. Bonet, J.L., Barros, M.H.F.M. and Romero, M.L. (2006), "Comparative study of analytical and numerical algorithms for designing reinforced concrete sections under biaxial bending", J. Comput. Struct., 84, 2184-2193. https://doi.org/10.1016/j.compstruc.2006.08.065
  4. Campione, G., Fossetti, M. and Papia, M. (2010), "Behavior of fiber-reinforced concrete columns under axially and eccentrically compressive loads", Struct. J., 107(3), 272-281.
  5. Chang, G. and Mander, J. (1994), "Seismic energy based fatigue damage analysis of bridge columns: part I - evaluation of seismic capacity", NCEER Technical Rep. 94/0006; University of Buffalo, New York, NY, USA.
  6. Charalampakis, A.E. and Koumousis, V.K. (2008), "Ultimate strength analysis of composite sections under biaxial bending and axial load", J. Adv. Eng. Soft., 39(11), 923-936. https://doi.org/10.1016/j.advengsoft.2008.01.007
  7. Chen, C.C. and Lin, N.J. (2006), "Analytical model for predicting axial capacity and behaviour of concrete encased steel composite stub columns", J. Const. Steel Res., 62(5), 424-433. https://doi.org/10.1016/j.jcsr.2005.04.021
  8. Chen, S.F., Teng G. and Chan, S.L. (2001), "Design of biaxially loaded short composite columns of arbitrary cross section", J. Struct. Eng., 127(6), 678-685. https://doi.org/10.1061/(ASCE)0733-9445(2001)127:6(678)
  9. Eurocode 2 (2005), Design of Concrete Structures, Part 1-1: General rules and rules for buildings; European Committee for Standardization (CEN).
  10. Fossetti, M. and Papia, M. (2012), "Dimensionless analysis of RC rectangular sections under axial load and biaxial bending", J. Eng. Struct., 44, 34-45. https://doi.org/10.1016/j.engstruct.2012.05.049
  11. Mander, J.B., Priestley, M.J. and Park, N.R. (1988), "Theoretical stress-strain model for confined concrete", J. Struct. Eng., 114(8), 1804-1826. https://doi.org/10.1061/(ASCE)0733-9445(1988)114:8(1804)
  12. Rodriguez, J.A. and Aristizabal-Ochoa, J.D. (1999), "Biaxial interaction diagrams for short RC columns of any cross section", J. Struct. Eng., 125(6), 672-683. https://doi.org/10.1061/(ASCE)0733-9445(1999)125:6(672)
  13. Rotter, J.M. (1985), "Rapid exact inelastic biaxial bending analysis", J. Struct. Eng., 111(12), 2659-2674. https://doi.org/10.1061/(ASCE)0733-9445(1985)111:12(2659)
  14. Saatcioglu, M. and Razvi, S.R. (1992), "Strength and ductility of confined concrete", J. Struct. Eng., 118(6), 1590-1607. https://doi.org/10.1061/(ASCE)0733-9445(1992)118:6(1590)
  15. Saatcioglu, M., Salamat, A.H. and Razvi, S.R. (1995), "Confined columns under eccentric loading", J. Struct. Eng., 121(11), 1547-1555. https://doi.org/10.1061/(ASCE)0733-9445(1995)121:11(1547)
  16. Sargin, M. (1971), "Stress-strain relationship for concrete and the analysis of structural concrete sections", Study Report 4, University of Waterloo, Ontario.
  17. Sousa, J.B.M. and Muniz, C.F.D.G. (2007), "Analytical integration of cross section properties for numerical analysis of reinforced concrete, steel and composite frames", J. Eng. Struct., 29(4), 618-625. https://doi.org/10.1016/j.engstruct.2006.06.002
  18. Vallenas, J., Bertero, V.V. and Popov, E.P. (1977), "Concrete confined by rectangular hoops and subjected to axial loads", UCB/EERC Rep. 77/13; Earthquake Engineering Research Center, University of California, Berkeley, CA, USA.

피인용 문헌

  1. An algorithm to simulate the nonlinear behavior of RC 1D structural members under monotonic or cyclic combined loading vol.66, pp.3, 2015, https://doi.org/10.12989/sem.2018.66.3.305
  2. An algorithm for simulation of cyclic eccentrically-loaded RC columns using fixed rectangular finite elements discretization vol.23, pp.1, 2015, https://doi.org/10.12989/cac.2019.23.1.025