Journal of the Computational Structural Engineering Institute of Korea (한국전산구조공학회논문집)

Computational Structural Engineering Institute of Korea (한국전산구조공학회)
권호 표지
DOI QR코드

DOI QR Code

A Proposal of Model Updating Method for Steel Frame Using Global/Local Responses

전역적/국부 응답을 이용한 철골조의 모델 업데이팅 기법 제안

  • Oh, Byung-Kwan (Department of Architectural Engineering, Yonsei Univ.) ;
  • Choi, Se-Woon (Department of Architecture, Catholic Univ. of Daegu) ;
  • Kim, Yousok (Center for Structural Health Care Techhnology in Buildings, Yonsei Univ.) ;
  • Park, Hyo-Seon (Department of Architectural Engineering, Yonsei Univ.)
  • 오병관 (연세대학교 건축공학과) ;
  • 최세운 (대구카톨릭대학교 건축학부) ;
  • 김유석 (연세대학교 건축구조헬스케어연구단) ;
  • 박효선 (연세대학교 건축공학과)
  • Received : 2015.06.23
  • Accepted : 2015.07.21
  • Published : 2015.08.28
Download PDF
⟨ Previous Next ⟩

Abstract

Conventional model updating methods for the structures have used global structural responses which are modal parameters obtained through vibration measurements. Although models updated by modal parameters estimate global structural responses accurately, they have difficulties to predict local responses for safety assesment of structural members. The safety of structural members in the structures has been evaluated through the stress estimation based on strain measurements. Thus, this study additionally uses measured strain responses of structural members to perform model updating besides modal parameters. In the proposed method, the objective functions are set to the differences of the global and local responses obtained from updated model and measurement and those functions are minimized by NSGA-II, one of the multi-objective optimization techniques. The strain responses predicted from updated model are used for safety assessment of the steel frame structures. The proposed method are verified by numerical and experimental studies through the impact hammer tests for a steel frame specimen.

기존 구조물의 모델 업데이팅 기법은 주로 진동 계측을 통해 얻은 전역적 구조 응답-모달 파라미터-를 이용한다. 모달 파라미터를 이용하여 업데이트된 모델은 전역적 구조 응답을 잘 추정할 수 있지만, 부재 레벨의 안전성 평가를 위한 국부적 응답 예측에는 어려움이 있다. 구조물 내 구조 부재들의 변형률 계측을 통해 응력을 추정하고, 안전성 평가가 이루어진다. 따라서, 본 연구는 모달 파라미터 이외에 로컬 구조 부재들에 가하는 해머 가력을 통해 계측한 변형률을 추가적으로 모델 업데이팅에 이용한다. 본 연구가 제안하는 모델 업데이팅에서 목적함수는 전역적/국부적 계측 응답과 모델의 응답간의 차로 설정되며 NSGA-II를 이용하여 이를 최소화된다. 업데이트 모델에서 예측하는 변형률 응답은 철골조의 안전성 평가에 활용된다. 제안한 기법은 철골 프레임에 대한 시뮬레이션과 해머 가력 실험을 통해 검증된다.

Keywords

References

  1. Arslan, M.E., Durmus, A. (2014) Modal Testing and Finite Element Model Calibration of in-filled Reinforce Concrete Frames, J. Vib. & Control, 20, pp.1946-1959. https://doi.org/10.1177/1077546313480545
  2. Brincker, R., Zhang, L., Andersen, P. (2001) Modal Identification of Output-only Systems using Frequency Domain Decomposition, Smart Mater. & Struct., 10, pp.441-445. https://doi.org/10.1088/0964-1726/10/3/303
  3. Butt, F., Oenzetter, P. (2014) Seismic Response Trends Evaluation and Finite Element Model Calibration of an Instrumented RC Building Considering Soil-Structure Interaction and Non-structural Components, Eng. Struct., 65, pp.111-123. https://doi.org/10.1016/j.engstruct.2014.01.045
  4. Chen, W.H., Lu, Z.R., Lin, W., Chen, S.H., Ni, Y.Q., Xia, Y., Liao, W.Y. (2011) Theoretical and Experimental Modal Analysis of the Guangzhou New TV Tower, Eng. Struct., 33, pp.3628-3646. https://doi.org/10.1016/j.engstruct.2011.07.028
  5. Choi, S.W., Kim, I.S., Park, J.H., Kim, Y., Sohn, H.G., Park, H.S. (2013) Evaluation of Stiffness Changes in a High-rise Building by Measurements of Lateral Displacements using GPS Technology, Sensors, 13, pp.15489-15503. https://doi.org/10.3390/s131115489
  6. Deb, K., Pratap, A., Agarwal, S., Meyarivan, T. (2002) A Fast and Elitist Multiobjective Genetic Algorithm: NSGA-II. IEEE Transactions on Evolutionary Computation, 6, pp.182-197. https://doi.org/10.1109/4235.996017
  7. Foti, D., Gattulli, V. (2014) Output-only Identification and Model Updating by Dynamic Testing in Unfavorable Conditions for a Seismically Damaged Building, Computer-Aided Civil & Infrastruct. Eng., 29, pp.659-675. https://doi.org/10.1111/mice.12071
  8. Jafarkhani, R., Masri, S.F. (2011) Finite Element Model Updating using Evolutionary Strategy for Damage Detection, Computer-Aided Civil & Infrastruct. Eng., 26, pp.207-224. https://doi.org/10.1111/j.1467-8667.2010.00687.x
  9. Kurata, M., Li, X., Fujita, K., Yamaguchi, M. (2013) Piezoelectric Dynamic Strain Monitoring for Detecting Local Seismic Damage in Steel Buildings, Smart Mater. & Struct., 22, 115002. https://doi.org/10.1088/0964-1726/22/11/115002
  10. Lamarche, C.P., Paultre, P., Proulx, J., Mousseau, S. (2007) Assessment of the Frequency Domain Decomposition Technique by Forcedvibration Tests of a Full-Scale Structure, Earthq. Eng. Struct. & Dyn., 37, pp.487-494.
  11. Lee, H.M., Choi, S.W., Jung, D.J., Park, H.S. (2013) Analytical Model for Estimation of Maximum Normal Stress in Steel Beam-columns based on Wireless Measurement of Average Strains from Vibrating Wire Strain Gages, Computer-Aided Civil & Infrastruct. Eng., 28, pp.717-717.
  12. Lee, H.M., Park, H.S. (2011) Gage-free Stress Estimation of a Beam-like Structure based on Terrestrial Laser Scanning, Computer-Aided Civil & Infrastruct. Eng., 26, pp.647-658. https://doi.org/10.1111/j.1467-8667.2011.00723.x
  13. Li, J., Hao, H. (2014) Substructure Damage Identification based on Wavelet-Domain Response Reconstruction, Struct. Health Monit., 13, pp.389-405. https://doi.org/10.1177/1475921714532991
  14. Park, H.S., Shin, Y., Choi, S.W., Kim, Y. (2013) An Integrated Structural Health Monitoring System for the Local/global Response of a Large-scale Irregular Building under Construction, Sensors, 13, pp.9085-9103. https://doi.org/10.3390/s130709085
  15. Roussel, M., Glisic, B., Lau, J.M., Fong, C.C. (2014) Long-term Monitoring of High-rise Buildings Connected by Link Bridges, J. Civil Struct. Health Monit., 4, pp.57-67. https://doi.org/10.1007/s13349-013-0045-4
  16. Wang, Y., Li, Z., Wang, C., Wang, H. (2013) Concurrent Multi-scale Modeling and Updating of Long-span Bridges using a Multi-objective Optimization Technique, Struct. & Infrastruct. Eng., 9, pp.1251-1266. https://doi.org/10.1080/15732479.2012.683198
  17. Wu, J. R., Li, Q.S. (2006) Structural Parameter Identification and Damage Detection for a Steel Structure using a Two-stage Finite Element Model Updating Method, J. Construct. Steel Research, 62, pp.231-239. https://doi.org/10.1016/j.jcsr.2005.07.003
  18. Xia, Y., Zhang, P., Ni, Y., Zhu, H. (2014) Deformation Monitoring of a Super-tall Structure using Real-time Strain Data, Eng. Struct., 67, pp.29-38. https://doi.org/10.1016/j.engstruct.2014.02.009
  19. Zhang, Y., Yang, W. (2013) Bayesian Strain Modal Analysis under Ambient Vibration and Damage Identification using Distributed Fiber Bragg Grating Sensors, Sensors & Actuators A: Physical, 201, pp.434-449. https://doi.org/10.1016/j.sna.2013.07.034
  20. Zimmerman, A.T., Shiraishi, M., Swartz, R.A., Lynch, J.P. (2008) Automated Modal Parameter Estimation by Parallel Processing within Wireless Monitoring Systems, J. Infrastruct. Sys., 14, pp.102-113. https://doi.org/10.1061/(ASCE)1076-0342(2008)14:1(102)