한국기계가공학회지 (Journal of the Korean Society of Manufacturing Process Engineers)

  • 제14권2호
  • /
  • Pages.99-104
  • /
  • 2015
  • /
  • 1598-6721(pISSN)
  • /
  • 2288-0771(eISSN)
한국기계가공학회 (The Korean Society of Manufacturing Process Engineers)
권호 표지
DOI QR코드

DOI QR Code

알루미늄 프로파일의 체결방법이 응력과 변위에 미치는 영향

Effect on the Stress and Displacement of Aluminum Profiles Fastening Method

  • 허장욱 (금오공과대학교 기계시스템공학과) ;
  • 신백천 (금오공과대학교 기계시스템공학과)
  • Hur, Jang-Wook (Under Graduate School of Mechanical System Engineering, Kumoh National Institute of Technology) ;
  • Shin, Baek-Cheon (Under Graduate School of Mechanical System Engineering, Kumoh National Institute of Technology)
  • 투고 : 2015.01.18
  • 심사 : 2015.02.24
  • 발행 : 2015.04.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

This study analyzed the effects on displacement and stress as a result of improving the profile fastening method targeting rectangular-shaped and cube-shaped specimens. For the rectangular-shaped specimens, the improved fastening method reduced maximum displacement to 41.7% and maximum stress to 18.3% compared to the existing fastening method. For the cube-shaped specimens, maximum displacement and maximum stress results were found to be similar to those of the rectangular-shaped specimens. Thus, as a result of comparing the stress and displacement of the existing and improved fastening methods, it was found that the improved fastening method is superior to the existing fastening method in terms of load support.

키워드

참고문헌

  1. Hur J. W., Jung J. E., Kim J. H. and Choi S. D., "The Manufacturing of the Special Connector for Aluminum Profiles Fastening", The Korean Society Manufacturing Process Engineers, Proceedings of the KSMPE, pp.124, 2013.
  2. Kim J. H., Hur J. W. and Jung J. E., "Effect of Strength Improvement of Aluminum Profiles Fastening Method", The Korean Society Manufacturing Process Engineers, Proceedings of the KSMPE, pp.104, 2014.
  3. Baek J. G., Baek Y. M., Kim Y. H., Jung C. Y. and Kim S. C., "The Tensile Strength Characteristics of Aluminum Alloys", Journal of Research Institute of Industrial Technology, Vol. 56, pp.297-303, 1999.
  4. Yoon S. C., Kim W. K., Hong Y. K. and Pyun J. S., "Structure Analysis ad Loading Test of Body Structure having Aluminum", The Korean Society for Railway, pp.59-64, 2003.
  5. Lee K. S., Yang Y. J., Park J. W., Hwang W. C. and Kim J. H., "Finite Element Analysis on the Ultimate Behaviors on Single Shear Bolted Joints with Thin-walled Aluminum Alloys", The Architectural Institute of Korea, Vol. 31, No. 2, pp.85-86, 2011.
  6. Ryu S. H. and Ahn H. J., "A Study on Flexural Strength of Prominent Section of SC Beams", JKISMI, Vol. 10, No. 1, pp.197-204, 2006.
  7. Kelimu T., Lee W. Jun., Hur S. C. and Park W. J., "Tensile Property and Residual Stresses in Dissimilar Aluminiums Friction Stir Welding", KAOSTS, Vol. 2012, No. 5, pp.1622-1625, 2012.
  8. Lee K. S., Yang Y. J., Park J. W., Hwang W. C. and Kim J. H., "Energy Absorption Mechanism of Aluminum Composite Compound Structural Member", KSAE, pp.13-18, 2007.
  9. http://www.s-won.kr, "Aluminium Profile".