DOI QR코드

DOI QR Code

Equivalent moment of inertia of a truss bridge with steel-concrete composite deck

  • 투고 : 2015.04.23
  • 심사 : 2015.07.25
  • 발행 : 2015.08.25

초록

Flexural stiffness of bridge spans has become even more important parameter since Eurocode 1 introduced for railway bridges the serviceability limit state of resonance. For simply supported bridge spans it relies, in general, on accurate assessment of span moment of inertia that governs span flexural stiffness. The paper presents three methods of estimation of the equivalent moment of inertia for such spans: experimental, analytical and numerical. Test loading of the twin truss bridge spans and test results are presented. Recorded displacements and the method of least squares are used to find an "experimental" moment of inertia. Then it is computed according to the analytical method that accounts for joint action of truss girders and composite deck as well as limited span shear stiffness provided by diagonal bracing. Finally a 3D model of finite element method is created to assess the moment of inertia. Discussion of results is given. The comparative analysis proves efficiency of the analytical method.

키워드

과제정보

연구 과제 주관 기관 : Ministry of Science and Higher Education of Republic of Poland

참고문헌

  1. Autodesk Robot (2013)
  2. Chen, W.F. and Duan, L. (2013), Handbook of International Bridge Engineering, CRC Press.
  3. Gao, Z. (2012), "Zhengzhou Yellow River Road-Cum-Railway Bridge, China", Stahlbau, 81, 151-155. https://doi.org/10.1002/stab.201201522
  4. Hu, N., Dai, G.L., Yan, B.and Liu, K. (2014), "Recent development of design and construction of medium and long span high-speed railway bridges in China", Eng. Struct., 74, 233-241. https://doi.org/10.1016/j.engstruct.2014.05.052
  5. Li, Z.X., Zhou, T.Q., Chan, T.H.T. and Yu, Y. (2007), "Multi-scale numerical analysis on dynamic response and local damage in long-span bridges", Eng. Struct., 29, 1507-1524. https://doi.org/10.1016/j.engstruct.2006.08.004
  6. Palkowski, S. (2001), Konstrukcje Stalowe. Wybrane Zagadnienia Obliczania i Projektowania (Steel Structures. Some Aspects of Computation and Design), PWN, Warsaw, Poland.
  7. Reintjes, K.H. (2009), "Das Zugelgurt-Fachwerk uber die Mulde in Wurzen-eine Revision nach Entwurf und Ausfuhrung (The Bridle-Chord Truss Bridge Across the River Mulde near Wurzen, Germany-a Review after Design and Construction)", Stahlbau, 78, 188-196. https://doi.org/10.1002/stab.200910018
  8. Siekierski, W. (2014), "Composite deck in 2D modelling of railway truss bridge", Baltic J. Road Bridge Eng., 9(2), 115-122. https://doi.org/10.3846/bjrbe.2014.15
  9. Unsworth, J.F. (2010), Design of Modern Steel Railway Bridges, CRC Press.
  10. Xia, C. and Zhong, T. (2011), "Numerical analysis of the Nanjing Dashengguan Yangtze River Bridge subjected to non-uniform seismic excitations", J. Mech. Sci. Tech., 25(5), 1297-1306. https://doi.org/10.1007/s12206-011-0230-5
  11. Zhang, Y.Z. and Zhang, M. (2011), "Structure and behavior of floor system of two super high-speed railway Changjiang Composite Bridges", J. Cent. South Univ. Technol., 18, 542-549. https://doi.org/10.1007/s11771-011-0729-z
  12. Zheng, P. and Dai, G. (2013), "A comparative study on static properties of a three-main-truss and threecable-plane cable-stayed bridge", J. Eng. Des. Tech., 11(2), 207-220. https://doi.org/10.1108/JEDT-10-2011-0069