한국구조물진단유지관리공학회 논문집 (Journal of the Korea institute for structural maintenance and inspection)

  • 제19권4호
  • /
  • Pages.75-82
  • /
  • 2015
  • /
  • 2234-6937(pISSN)
  • /
  • 2287-6979(eISSN)
한국구조물진단유지관리공학회 (Korea Institute for Structural Maintenance Inspection)
권호 표지
DOI QR코드

DOI QR Code

철근 보강된 ECC 기둥의 반복하중에 대한 이력거동

Cyclic Responses of Steel Reinforced ECC Column under Reversed Cyclic Loading Conditions

  • 투고 : 2015.04.20
  • 심사 : 2015.05.14
  • 발행 : 2015.07.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

이 논문에서는 철근으로 보강한 고인성 섬유복합체(ECC) 기둥의 반복이력거동을 연구하였다. ECC를 제조하기 위하여 1종 보통 포틀랜드 시멘트(OPC)를 기본 결합재로 하고, 플라이애시를 다량 치환하여 결합재와 충전재로 사용하는 배합을 적용하였다. 철근 보강한 ECC 기둥의 반복이력거동을 평가하기 위하여 일반 철근콘크리트 기둥 실험체를 제작하여 실험을 수행하였다. 반복하중에 의한 실험의 결과, 일반 철근콘크리트 기둥에 비하여 철근 보강한 ECC 기둥은 높은 연성비와 함께 안정적인 이력거동을 나타내었고, 우수한 휨 균열 제어 특성을 나타내었다. 또한 횡방향 하중에 대한 기둥의 내력 증진효과와 함께 에너지 소산능력의 향상을 나타내었다.

In this study, experimental research was carried out to evaluate steel reinforced ECC (Engineered Cementitious Composites) column, which exhibits excellent crack control property and highly ductile behavior. Ordinary portland cement and high volume fly ash were used as binding materials in the mixture proportions for the purpose of achieving a high level of multiple cracking property with the tightly controlled crack width. To compare with the cyclic behavior of steel reinforced ECC column specimen, a conventional reinforced concrete column was prepared and tested under reversed cyclic loading condition. Based on the cyclic load test, ECC column exhibited higher cyclic behavior, compared to the conventional RC column, in terms of load carrying capacity and energy dissipation capacity.

키워드

참고문헌

  1. Cho, C.G., Kim, Y.Y., Feoc, L., and Hui, D. (2012), Cyclic Responses of Reinforced Concrete Composite Columns Strengthened in the Plastic Hinge Region by HPFRC Mortar, Composite Structures, Vol.94, No.7, pp. 2246-2253. https://doi.org/10.1016/j.compstruct.2012.01.025
  2. Fischer G, Li VC. (2002), Effect of matrix ductility on deformation behavior of steelreinforced ECC flexural members under reversed cyclic loading conditions. ACI Struct J. 99(6), 781-90.
  3. Fischer G, Li VC. (2003), Deformation behavior of fiberreinforced polymer reinforced Engineered Cementitious Composite (ECC) flexural members under reversed cyclic loading conditions. ACI Struct J, 100(1), 25-35.
  4. Kim, Y. Y., Kim, J. S., Ha, G. J., and Kim, J. K. (2006), Development of an ECC (Engineered Cementitious Composite) Designed with Ground Granulated Blast Furnace Slag, Journal of the Korea Concrete Institute, 18(1), pp. 21-28. https://doi.org/10.4334/JKCI.2006.18.1.021
  5. Kim, Y. Y., Kim, J. S., Kim, H. S., Ha, G. J., Kim, J. K. (2005), Mechanical Properties of an ECC (Engineered Cementitious Composite) Designed Based on Micromechanical Principle, Journal of the Korea Concrete Institute, 17(5), pp. 709-716. https://doi.org/10.4334/JKCI.2005.17.5.709
  6. Kim, Y. Y., Lee, B. Y., Bang, J. W., Han, B. C., Feoe, L., and Cho, C. G. (2014), Flexural Performance of Reinforced Concrete Beams Strengthened with Strain-Hardening Cementitious Composite and High Strength Reinforcing Steel Bar, Composites Part B: Engineering, Vol.56, Jan., 2014, pp.512-519. https://doi.org/10.1016/j.compositesb.2013.08.069
  7. Lee, B.Y., Han, B.C., Cho, C.G., and Kim, Y.Y. (2012), Flexural Performance and Fiber Distribution of an Extruded DFRCC Panel, Computers and Concrete, 10(2), pp.105-119. https://doi.org/10.12989/cac.2012.10.2.105
  8. Li, V. C., Wang, Y., and Backer, S. (1991), A Micro mechanical Model of Tension-Softening and Bridging Toughening of Short Random Fiver Reinforced Brittle Matrix Composites, Journal of the Mechanics and Physics of Solids, Vol. 39, Issue, 5, pp. 607-625. (doi:http://dx.doi.org/10.1016/0022-5096(91)90043-N)
  9. Li, V. C. and Wu, H. C. (1992), Condition for Pseudo Strain-Hardening in Fiber Reinforced Brittle Matrix Composites," Journal of Applied Mechanics Review, Vol. 45, Issue 8, pp. 390-398. https://doi.org/10.1115/1.3119767
  10. Li, V. C., Wang, S., and Wu, C. (2001), Tensile Strainhardening Behavior of Polyvinyl Alcohol-engineered Cementitious Composite (PVA-ECC), ACI Materials Journal, Vol. 98, No. 6, pp. 483-492.
  11. Marshall, D. B. and Cox, B. N.(1988), A J-Integral Method for Calculating Steady-State Matrix Cracking Stresses in Composite, Mechanics of Materials, Vol. 7, Issue 2, pp.127-133. https://doi.org/10.1016/0167-6636(88)90011-7
  12. Salahuddin Q., Mohamed M. (2014), Application of Engineered Cementitious Composites (ECC) in interior beam-column connections for enhanced seismic resistance, Engineering Structures, 69(15), pp. 235-245. https://doi.org/10.1016/j.engstruct.2014.03.026
  13. Shwan H. Said, Hashim Abdul Razak, Ismail Othman. (2015), Flexural behavior of engineered cementitious composite (ECC) slabs with polyvinyl alcohol fibers, Construction and Building Materials, Vol. 75, No. 30, pp. 176-188. https://doi.org/10.1016/j.conbuildmat.2014.10.036