한국구조물진단유지관리공학회 논문집 (Journal of the Korea institute for structural maintenance and inspection)

  • 제19권4호
  • /
  • Pages.1-9
  • /
  • 2015
  • /
  • 2234-6937(pISSN)
  • /
  • 2287-6979(eISSN)
한국구조물진단유지관리공학회 (Korea Institute for Structural Maintenance Inspection)
권호 표지
DOI QR코드

DOI QR Code

RCS 보-기둥 접합부의 전단강도 산정식 평가

Estimation Formula for Shear Strength of RCS Beam-Column Joint

  • 투고 : 2014.09.12
  • 심사 : 2015.02.13
  • 발행 : 2015.07.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

본 연구는 철근콘크리트 기둥과 철골보로 이루어진 RCS합성구조에서 내부접합부의 전단강도에 관한 연구이다. 새로운 건물 구조시스템인 합성구조 시스템은 철근콘크리트 기둥과 철골보의 장점을 최대한 살린 구조로서 경제적, 실용적인 접합부 상세들이 많이 개발되어 왔다. 그럼에도 불구하고 접합부에 대한 구조적 거동 및 응력전달기구가 명확히 밝혀지지 않고 있으며 여전히 제안된 식들로부터 많은 차이를 보이고 있다. 따라서 본 연구에서는 접합부에서 철골보가 철근콘크리트 기둥을 관통하는 보 관통형 RCS 구조체를 대상으로 하여 기존의 전단파괴 실험체 37개를 접합부 형태에 따라 기존에 제안된 5개의 주요식들에 적용하였다. 회기분석을 통한 각 제안식의 신뢰성을 검증하였고, 기존식들의 단점을 보완할 수 있는 전단강도 추정식을 제안하였다.

This study is on the shear strength of the internal joints of RCS composite structure consisting of reinforced concrete column and steel beam. As a newly structure system, the composite system has been developed to fully utilize the advantages of reinforced concrete column and steel beam, which also include economic and practical joint detail. Nevertheless stress transfer mechanism and structural behavior of the joints had not been still clearly revealed and shown much difference from the proposed equation. In this study, by observing the crossing of reinforced concrete column through steel beam to the RCS structure beam type, thirty seven shear failure specimens were selected and applied to the 5 major equations which is used to calculate the shear strength of RCS joint. Through the regression analysis, modified equation which is more reliable and approximate results for shear strength of RCS joints was proposed.

키워드

참고문헌

  1. Tauqir Muhammad Sheikh, B.Sc., M.S. (1987), Moment Connections Between Steel Beams and concrete Column, Master Dissertation presented to the Faculty of the University of texas at austin 41-63
  2. Gregory Gerard Deierlein (1988), Design of moment connections for composite framed structures, Dissertation presented to the Faculty of the university of texas at austin 109-135
  3. Parra-Montesions G, Wight JK. (2001) Modeling shear beha vior of hybrid RCS beam-column connections, ASCE J Struct Eng 127(1):3-11 https://doi.org/10.1061/(ASCE)0733-9445(2001)127:1(3)
  4. Ryoichi Kanno (1993) Strength, Deformation, and Seismic Resistance of Joints between Steel Beams and Reinforced Concrete Columns, Vol. 1, Master Dissertation presented to the Faculty of the Cornell University
  5. SamSung C&T Corporation (1999) Development and Perfor mance Evaluation of LC Frame, Hanyang University mega structural system research center report
  6. Lee Eun-Jin (2005) Shear Behavior of Hybrid Connection consisted of Reinforced Concrete Column and Steel Beam, Master Dissertation presented to the Faculty of the Hanyang University
  7. Choi Keun-Do (2007) Shear Performance with confining effect on Reinforced Concrete Column and Steel Beam Joint, Master Dissertation presented to the Faculty of the Hanyang University 5-12
  8. Kim Young-Soo (2001) A Structural Behavier Study on T-type Joint for RCS Composite System, Kyungbok collection of writings No.5 115-137
  9. Kim Young-Soo (2002) A Structurl Development Study on T-type Joint for RCS Composite System, Kyungbok collection of writings No.6 135-160
  10. Choi Oan-Chul (1997) Composite RCS Beam-Column Frame System: An Update, Architectural institute of Korea 17(2):1207-1211
  11. Wei Li (2011) Seismic performance of composite reinforced concrete and steel moment frame structures-state-of-the-art , Elsevier, composites: Part B 42:190-206 https://doi.org/10.1016/j.compositesb.2010.10.008
  12. Moon, Jeong-Ho (2006) Statistical Analysis on the Shear Strength Equations of RC Column-Steel Beam Joint, Architectural institute of Korea 22(4):11-18